Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

加强质量文化建设追求卓越质量

本文介绍了武昌造船厂在企业质量文化中,继承和拓展优良传统,牢固树立"100 1"的质量理念,采取特色管理活动,结合生产经营管理实际,把质量文化理念与生产经营深度融合,在企业管理中落地生根,促进质量管理水平不断提高和产品实物质量的持续提升。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。     

基于ANSYS的油罐拱顶与罐壁关联性分析

针对油罐拱顶与罐壁上部容易出现失稳变形的实际问题,基于ANSYS建立了油罐有限元模型,对油罐结构稳定性进行数值模拟,探讨加载关联性和结构关联性对均匀外压作用下油罐稳定性的影响。结果表明:分析油罐结构稳定性时,对于给定尺寸的油罐,失稳发生在结构较薄弱部位;拱顶和罐壁可独立加载求解临界载荷,取较小值作为油罐的临界载荷;油罐的失稳分析要考虑拱顶与罐壁间相互作用对总体临界载荷的影响。研究结果可为基于有限元法的油罐稳定性设计和分析提供一定参考。     

PDSC评定柴油氧化安定性

为研究一种操作简便、检测快速的柴油氧化安定性评定方法,采用高压差示扫描量热法(PDSC)对柴油氧化安定性进行评定,通过单因素变量法分析了升温速率、恒容氧压、试样量对柴油氧化安定性的影响,确定了3种因素水平分别为8~12℃/min,2.5~4.5 MPa,2.5~3.5 mg。通过正交试验法得出升温速率对柴油氧化安定性的影响最大,恒容氧压的影响最小。方差分析表明在升温速率为8℃/min,恒容氧压为3.5 MPa,试样量为3.0 mg时,试验方法的区分性最佳。在该试验条件下,考察了5种油样的重复性,结果表明PDSC法的重复性满足标准要求。     

机翼不对称损伤飞机在大侧滑角下的操稳特性研究

对某小型电动无人机(以下简称SEPUAV)在其左翼破损40%面积矩下的操稳特性进行详细分析。首先在此损伤下典型大侧滑角定常工作点附近进行特殊的小扰动线性化,然后进行特征根和飞行运动模态的分析;其次对此特殊构型SEPUAV进行操稳特性、时频响应特性进行分析。分析结果表明:左翼破损40%面积矩SEPUAV出现特有运动模态并影响全部纵侧向运动状态的响应;部分传递函数出现较多非最小相位零点从而导致初始响应发生反向;部分通道的Bode图中出现多个波峰波谷并有相角提前等现象。分析结果对后续容损飞行控制器的设计起到铺垫的作用。     

锥形运动控制的导弹姿态稳定性分析

针对锥形运动对弹体稳定性的影响,建立了导弹锥形运动控制的非线性数学模型,通过引入复攻角的概念,使难以用解析手段处理的非线性模型转换成可解析的一般模型。根据线性化模型分析了导弹复攻角运动方程,推导了制导控制系统参数的稳定控制域范围,分析了控制系统阻尼回路和控制回路对导弹锥形运动稳定性的影响规律,提出了锥形运动控制的稳定性判定方法。仿真结果进一步验证了该判定方法的可行性和正确性,为导弹锥形运动的制导控制系统设计提供了依据。