非相干背景光辐照二波耦合中的最佳匹配随机共振

针对非相干背景光辐照二波耦合中参数的最佳匹配设计问题,提出了一种基于随机共振理论的研究方法。首先,文章通过二波耦合过程进行物理机理分析和数值实验分析,证明了该问题在本质上可归结为一种随机共振现象。其次,从随机共振的角度,研究其中的最佳参数设计问题,给出了一种分布处理的最优参数设计流程。按照该方法,在给定增益要求的情况下,先根据信号光饱和与否来确定晶体长度,最后根据非相干光的比例对增益的影响来确定非相干光的比例。仿真实验表明,经过最佳参数设计后,信号的增益和输出信噪比上均有显著提高。     

Thomas Firth and Sons – Steelmakers to the Arms Industries. Part 2: Heavy Armaments

Firth’s were the first of the Sheffield steel makers to enter the field armaments. Their involvement with Colt has been outlined in an article in the journal of the Colt Collectors Association in America and their activities as steelmakers to the small-arms industries has been covered in a previous issue of this Journal. This article gives a brief overview of their involvement as manufacturers in the field of heavy armaments, being the first to make all-steel guns and their evolving role in the use of steel for ordnance, culminating in the displacement of wrought iron by the adoption of steel for ordnance manufacture by the Royal Gun Factory in the 1880s. It also highlights their development of stainless steel in this context.     

两种新型试验用钢疲劳寿命差异的实验研究

选用两种新型试验用钢,分析测定了它们的化学成分、金相组织特征及夹杂物分布形态;通过高频疲劳测定试验比较了它们之间疲劳寿命差异。结果表明:对同种钢而言,缺口系数对疲劳寿命的影响非常大,缺口系数越大,疲劳寿命越小;不同钢之间的疲劳寿命的差异取决于钢中的化学成分及钢中夹杂物,合理地提高材料的合金元素,有效地改善材料的化学成分的配比及适当的热处理工艺可以明显提高材料的强度极限;纯净的钢质量及合理的高强度是提高钢的疲劳寿命的最合理、有效的手段。     

高速微粒轰击45钢表面纳米化过程中铁素体相晶粒细化过程分析

利用高速微粒轰击技术在45钢表面制备了纳米晶,利用透射电镜（TEM）和X射线衍射（XRD）等分析技术对距表面不同深度的微观结构进行分析,研究铁素体相晶粒细化过程。结果显示：随着距表面距离的减小结构尺寸逐渐减小,在最表面形成了纳米晶层,平均晶粒尺寸约为15 nm。通过不同尺寸位错胞的逐步形成,以及位错墙不断向晶界演化,晶粒被细化为细小的纳米晶。     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.     

15000m~3钢板贴壁油罐建设静态投资分析

以部队某保障基地油库军用柴油扩容工程采用钢板贴壁工艺新建的1座15 000 m3地下水封油池为例,从技术经济学角度对钢板贴壁油罐作了静态投资分析。该钢板贴壁油罐静态总投资1 756.95万元,其中占总投资比例最高者为地下工程建设,达到53.76%,库容投资1 171.30元/m3。结果表明:钢板贴壁油罐较地下水封石洞油罐整体经济效益明显;投资定额可供编制预算参考。     

长杆射弹对钢纤维混凝土靶开坑特性的实验研究

为考察射弹对钢纤维混凝土靶的侵彻特性,采用57mm轻气炮,进行了小尺寸模拟射弹对钢纤维混凝土靶(钢纤维的体积分数为2%)的侵彻实验。实验中观察了钢纤维混凝土靶的开坑形状,测量了射弹的击靶速度,并且采用注沙法测出靶体的开坑体积,计算出射弹对靶体的侵彻体积,得到了长杆射弹的动能与侵彻体积的关系。引入射弹单位面积的冲击动能和靶体单位侵彻体积的冲击动能,结合钢纤维混凝土靶的实验数据,考察了两者之间的关系。     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal

The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study consist of the brazing current, electrode pressure and brazing time. The Taguchi method was applied to the design of experiments. Signal-to-Noise ratio was introduced in the study to identify optimal levels from the process where input parameters yield increased shear strength. Brazing was thus implemented with 5,000A brazing current, 0.70 MPa electrode pressure, and 1.50s brazing time. The maximum shear strength obtained was 54.31 N·mm⁻² in accordance with input parameter settings. In addition, Cu-rich phase and Ag_0.4Fe_0.6 intermetallic phases were found at the interface zone.     

高功率光纤激光相干合成关键技术

光纤激光的相干合成是获得高功率和高光束质量激光的重要途径,也是当前激光领域的研究热点之一.文章针对基于MOPA方案的光纤放大器相干合成系统,对抖动法相位锁定技术、光束拼接技术和压电陶瓷相位调制器等关键技术和器件进行了详细介绍,为高能光纤激光相干合成的进一步发展提供参考.