混编防空导弹火力群目标分配模型仿真

针对混合配置和部属不同类型的防空导弹武器构成全空域的防空系统中多目标的优化分配问题,介绍了混编防空导弹系统的关键要素和武器系统目标分配方法的现状,研究了防空自动化指挥系统中作战单元的的目标分配的原则、要素和约束条件,根据实际的防空导弹的数据处理特点,设计了一种实用可行的目标分配优化算法,并用VB进行了模型的作战仿真。     

高速SpaceFibre总线节点的系统设计

为了实现SpaceFibre总线节点的高效数据传输,针对网络协议中关键问题和技术提出了一种基于现场可编程门阵列(Field Programmable Gate Array,FPGA)的SpaceFibre总线节点系统设计方案。其中,采用了轮询仲裁算法,解决了多路虚拟通道中流量控制字的申请冲突;设计了基于服务质量机制的高效处理状态机,实现了多路虚拟通道的服务质量调度;提出了一种并行的分区存储架构和重发控制算法,实现了基于错误检测隔离恢复机制的错误恢复;采用了不同的数据并行处理方案,实现了多种数据格式的循环冗余校验和伪随机序列的计算。通过ModelSim仿真平台对节点系统进行功能仿真,并在Virtex-6 FPGA上完成了系统验证。结果表明,该设计实现了SpaceFibre总线节点的功能,串行传输速度可达3.125 Gbit/s,能够满足高速数据传输需求。     

改进cell密度聚类算法在空战目标分群中的应用

针对传统聚类算法对流形分布数据聚类效果差,且实时性不高的缺点,提出改进基于cell的密度聚类(Cell-Based density Spatial Clustering of Applications with Noise, CBSCAN)算法解决实时空战目标分群问题。通过分析空战态势参数,建立了空战目标分群通用模型,将目标分群转化为聚类问题。通过改进CBSCAN算法的簇类扩展方式,建立基于改进CBSCAN算法的目标分群模型。通过仿真实验,对比分析了K-means、最大期望算法、密度峰值算法、密度聚类算法、CBSCAN算法和改进CBSCAN算法在30种作战态势下的分群准确性和实时性,结果表明:改进CBSCAN算法可以在编队数目未知和目标流形分布的条件下,对多目标编队进行正确分群,且实时性较原始算法提高约30%,具有实际应用价值。     

Adaptive subspace detection based on two-step dimension reduction in the underwater waveguide

In the underwater waveguide, the conventional adaptive subspace detector (ASD), derived by using the generalized likelihood ratio test (GLRT) theory, suffers from a significant degradation in detection per-formance when the samplings of training data are deficient. This paper proposes a dimension-reduced approach to alleviate this problem. The dimension reduction includes two steps: firstly, the full array is divided into several subarrays; secondly, the test data and the training data at each subarray are transformed into the modal domain from the hydrophone domain. Then the modal-domain test data and training data at each subarray are processed to formulate the subarray statistic by using the GLRT theory. The final test statistic of the dimension-reduced ASD (DR-ASD) is obtained by summing all the subarray statistics. After the dimension reduction, the unknown parameters can be estimated more accurately so the DR-ASD achieves a better detection performance than the ASD. In order to achieve the optimal detection performance, the processing gain of the DR-ASD is deduced to choose a proper number of subarrays. Simulation experiments verify the improved detection performance of the DR-ASD compared with the ASD.     

Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

基于随机有限集理论的多传感器目标联合检测跟踪算法

针对杂波环境中的目标检测跟踪问题,提出一种基于随机有限集理论的多传感器目标联合检测跟踪算法。算法将目标状态和量测描述为随机集合,建立考虑目标出现、目标保持、目标消失等情况的目标状态随机有限集模型,以及考虑漏检和虚警的多传感器量测随机有限集模型。将目标的联合检测跟踪问题构建为目标状态集合的贝叶斯最优估计问题,并基于随机有限集理论对该贝叶斯估计算法的递推表达式进行严格理论推导。采用序贯蒙特卡罗技术实现算法的递推滤波。仿真结果验证了该算法的有效性以及算法相对于传统基于数据关联算法的性能优势。     

水下声探测系统载体振动干扰分析及抑制方法

针对水下探测系统载体振动对目标回波信号的微多普勒特征谱产生干扰的问题,从干扰产生的基本原理出发,推导了干扰的近似乘性表达式。在获取振动干扰数据的条件下,提出了针对乘性干扰的干扰抑制算法,并针对推导干扰乘性表达式时的近似条件,分析了近似算法带来的误差。仿真结果表明,该方法可有效抑制水下探测系统平台振动对目标回波信号的微多普勒特征谱产生的干扰,并且在绝大多数情况下,由算法带来的误差可以忽略不计。     

机载叶簇穿透超宽带SAR系统关键指标设计

对影响叶簇穿透超宽带SAR系统性能的三个最主要的技术参量 (工作频率、极化形式和分辨率 )进行了深入系统的分析 ,其结论性意见对超宽带雷达系统顶层设计有实用参考价值     

改善机载前向阵雷达全程检测性能的研究

针对前向阵的杂波分布特性 ,给出了一种空时自适应处理 (STAP)结合多重中脉冲重复频率(MPRF)的处理方案 ,研究了重复频率的选择以改进系统性能 ,并分析计算了三路多普勒通道联合处理STAP方法在一组中脉冲重复频率下的改善因子和距离 /速度二维盲区分布图。理论分析与仿真结果表明 ,该方案可以大大改善机载前向阵雷达的全程检测性能     

基于 MMSE 准则的盲自适应多用户检测算法

基于MMSE准则提出了一种新的盲自适应多用户检测算法 ,分析了该算法的性能并进行了仿真实验。理论分析及仿真实验表明 ,该算法具有较低的复杂度 ,且性能要优于MOE检测器