On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

高超声速变形飞行器翼面变形模式分析

为提高高超声速翼身组合式飞行器的射程,研究了采用不同翼面变形模式时,飞行器在马赫数3~8内的气动特性和翼面效率。针对典型的轴对称翼身组合式外形,采用Navier-Stokes方程进行数值模拟,对伸缩、变后掠和二维折叠三种变形模式下的外形在超声速及高超声速来流条件下进行模拟,并对升阻比、翼面单位面积升阻比和操稳特性进行分析。结果表明:在超声速及高超声速范围内,变后掠变形模式在宽速域内升阻比提高明显,同时具备优良的翼面效率及操稳特性,其在马赫数3~8范围内具有最优的综合性能。研究成果能对高超声速翼身组合式变形飞行器布局设计提供参考,具有一定的指导意义。     

利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。     

高超声速飞行器前体外形设计与气动特性分析

利用数值计算开展了高超声速飞行器前体气动特性的考察,重点研究了三维效应对于前体流场及预压缩性能的影响,提出了抑制三维侧缘溢流影响、改善三维前体气动性能的前体侧缘设计思想,考察了侧缘外形的容积效率,提出了有效容积效率的概念和评估方法,对于不同侧缘形式的前体构型进行了气动特性的考察,给出了不同前体构型气动特征的变化规律。     

星载双基地SAR系统模糊性

针对星载双基地SAR由双基地几何关系引入的新问题,提出了计算其模糊比的新方法和近似分解方法。利用此方法通过仿真计算对星载双基地SAR模糊性变化规律做了进一步研究。结果表明,因接收天线的面积限制,与其伴随飞行的大卫星SAR相比,模糊性问题更为严重,但变化规律基本一致。比较而言,由于小卫星天线尺寸在高度上更接近大卫星天线,在距离模糊比上相对大卫星SAR抬高得不多,而在方位模糊比上抬高较大。     

防御技术的新发展和新问题

讨论了在体系对抗条件下,导弹防御系统所碰到的新问题和面临这些问题应当研究的新技术。这些新技术不仅包括精确化、小型化和武器网络化,而且也包括目标识别、光电对抗和对抗效费比等。     

基于乘波构形的跨大气层飞行器气动布局

利用乘波构形具有升阻比大的特点,将其作为滑翔跳跃式跨大气层飞行器的基准外形进行研究,提出了乘波构形的设计方法,详细分析了各设计参数对乘波构形的影响,研究了不同马赫数、不同优化目标下得到的乘波体的性能,得到了升阻比大、容积效率高的跨大气层飞行器气动布局,所得结论对跨大气层飞行器气动布局和乘波体外形的研究具有一定的参考价值。     

部分驻留时间干扰对跳频同步及跟踪影响分析

扫频式干扰、更高跳速碰撞干扰等新的干扰方法成为跳频通信系统电子对抗领域中又一重要研究方向.在跳频通信系统每跳驻留时间内,这些新的干扰方法仅能干扰其中一小部分.为此,在对跳频通信系统研究基础上,重点分析了部分驻留时间干扰对跳频通信系统同步及跟踪的影响.进一步进行了仿真与分析,结果表明在一定干信驻留时间比情况下,部分驻留时间干扰的有效性,从而为针对跳频通信系统进行对抗提供相关方法.