后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

采用捷联惯性导航系统的战术导弹初始对准误差分离方法研究

捷联惯性导航系统的初始对准误差是战术地空导弹精度分配中的主要误差源之一 ,研究在外场条件下初始对准误差的快速分离方法对于提高导弹制导精度具有积极意义。     

军标图形运动航迹平滑处理方法研究

在计算机运动仿真中时常会遇到军标所代表目标转弯的情况。为了让军标在转弯处体现出转弯半径,并能够平滑逼真地显示,采用改进的坐标定位算法,利用实时经纬度坐标对军标的位置进行描述,并形象地在海图上显示;以Visual C++6.0为开发工具对目前常用的cximage类调用Rotate()成员函数旋转图像后,显示中心会出现偏差的问题进行了修正,保证了军标显示中心的正确位置,实现了军标沿直线、转弯圆弧运动。     

非线性干扰观测器的高超声速飞行器自适应反演控制

针对高超声速飞行器参数不确定弹性体模型,提出了一种基于非线性干扰观测器的自适应反演控制器设计方法。将曲线拟合模型表示为严格反馈形式,采用反演方法设计控制器。采用动态面方法获取虚拟控制量的导数,避免了传统反演控制"微分项膨胀"问题。为了增强控制器的鲁棒性,基于二阶跟踪-微分器设计了一种新型非线性干扰观测器,以此对模型不确定项进行自适应估计和补偿。仿真结果表明,控制器对模型不确定性和气动弹性影响具有强鲁棒性,且能实现对速度和高度参考指令的稳定跟踪。     

数字式单边带调制的关键及实现方法

分析了传统模拟方法实现单边带调制的不足,给出了用数字信号处理方法实现单边带调制的实现方法,并分析了其中的正交调制、内插技术等关键技术,在此基础上设计并实现了一个以TI TMS320 芯片为核心的数字式单边带调制系统.与模拟调制法相比,该电路结构简单,性能稳定可靠.     

采用保角变换法分析铁磁材料缺陷漏磁场

利用保角变换的方法求出了金属表面缺陷裂纹形状为半椭圆的情况下的漏磁场的模型。介绍了保角变换的过程, 边界等效磁荷的求解过程, 铁磁材料以外自由空间的漏磁场的求解过程, 并讨论了漏磁场与缺陷裂纹的大小的关系, 为缺陷定量提供了理论基础。     

基于不确定性理论的研制技术风险评估方法研究

分析了装备研制技术风险的含义,根据技术风险的特点建立了评价技术风险的指标体系。在技术风险度量中引入不确定性理论的概念,并建立了基于不确定性的技术风险的度量方法,对综合技术风险进行评价。最后通过实例验证了综合评价方法的可用性。