Consecutive k‐within‐m‐out‐of‐n:F system with exchangeable components

As a generalization of k‐out‐of‐n:F and consecutive k‐out‐of‐n:F systems, the consecutive k‐within‐m‐out‐of‐n:F system consists of n linearly ordered components such that the system fails iff there are m consecutive components which include among them at least k failed components. In this article, the reliability properties of consecutive k‐within‐m‐out‐of‐n:F systems with exchangeable components are studied. The bounds and approximations for the survival function are provided. A Monte Carlo estimator of system signature is obtained and used to approximate survival function. The results are illustrated and numerics are provided for an exchangeable multivariate Pareto distribution. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

均匀分布集群目标射击火力分配优化数值仿真方法

基于所提出的火力分配方案,使用数值积分方法将对均匀分布集群目标射击的火力分配优化问题转化为由多变量初等函数表示的积分和函数在单位多面正方体内的最小值求解问题,火力分配优化的瞄准点坐标可以尝试利用成熟的Matlab优化计算软件来直接求解,算例说明所给出方法对于火力分配优化问题的深入研究是有裨益的.     

空降兵师(团)登岛作战兵力分配模型

通过结合空降兵师(团)级登岛作战的战术特点,确立了遮断点的单点和联合价值的指标体系,建立了以联盟博弈为基础的兵力分配初步模型,然后以Shapley值作为此联盟博弈的解,结合投放过程中的兵力损耗,得到一个合理的兵力分配方案,从而建立了师(团)级空降登岛作战的兵力分配模型和算法.     

基于多分辨分析的舰船噪声能量特征提取方法

以离散小波变换入手,利用小波分析的恒Q特性,提取了舰船噪声信号的子带能量分布特征。结果表明,由于各子带能量参数并不相互独立,基于离散小波变换的舰船噪声子带能量分布特征并不明显。因此,依据多分辨分析理论,对舰船辐射噪声信号进行了正交多分辨分解,并提取了舰船噪声子带能量分布特征。结果表明特征是显著的,该方法从整体上反映了舰船噪声信号能量分布特征。为了从细节上对噪声信号能量特征进行分析,提出了基于多分辨分析的子带能量密度特征提取方法。采用两类共8个噪声样本对噪声子带能量分布和能量密度特征提取方法进行检验,取得了比较理想的结果。     

贝叶斯参数估计在雷区范围估计中的应用

提出了以发现水雷位置信息为抽样点,在给定估计误差的条件下,使用贝叶斯参数估计方法进行雷区范围估计的思路。详细讨论了水雷服从均匀分布时使用贝叶斯参数估计方法估计雷区范围的问题,给出了相关公式的推导过程,并设法解决仿真中存在的中间数值过大的问题。仿真结果均在允许误差范围之内,这验证了算法的可行性。     

"M/M/1"在单火力单元射击多目标火力分配中的应用

在单服务台排队系统理论的基础上,建立了单火力单元对多个目标射击的系统仿真模型,对此模型进行了分析,给出了模型的适用范围,并通过在计算机上仿真运行实例,验证了该仿真模型的正确性.该方法是一种有益的尝试与探索,对局部作战指挥决策有一定的参考价值.     

聚碳硅烷的高温高压合成与减压蒸馏

采用高温高压法合成了聚碳硅烷(PCS),通过改变合成条件与减压蒸馏温度的方法对PCS分子量及其分布进行调控。研究表明,改变PCS的反应温度、反应时间,可以基本控制PCS的分子量及其分布范围。随着反应温度的提高,反应时间的延长,PCS的分子量逐渐增大,分子量分布变宽。当合成温度高于450℃,反应时间大于6h时,或温度高于460℃,反应时间大于4h时,PCS中出现高分子量部分。随着反应条件的强化,高分子量部分逐渐增加,甚至出现超高分子量部分。提高减压蒸馏温度,可以有效降低PCS的低分子含量,提高分子量,降低分散系数。减压蒸馏温度每提高50℃,PCS的低分子含量约降低8%,重均分子量约提高1000,分散系数平均降低约0.3。     

弹炮结合防空武器系统火力分配模型

火力分配是弹炮结合武器系统射击指挥中的重要环节。论文针对弹炮结合武器系统中防空导弹分系统和高炮分系统战术技术性能与作战特点,在具体分析火力分配考虑的主要因素——防空导弹分系统和高炮分系统的杀伤区与毁伤概率的基础上,确立了相应的火力优化分配原则,构建了实用的临近航路和过航点处火力分配模型,通过仿真表明该模型实时性好,能满足实际应用需要,对进一步研究提供了有益的参考。     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.