一种改进的量子粒子群算法

量子粒子群算法是将量子计算与粒子群算法相结合的一种新的优化方法。首先利用相位角进行实数编码,将动态量子旋转门引入到粒子群算法中,采用自适应变异,提出了一种改进的量子粒子群算法。然后运用Pe-nalized函数和Ackley函数测试了该算法的性能。最后将该算法应用到武器目标分配模型中,获得了最优的分配方案。仿真研究表明,该算法具有收敛速度快、搜索能力强和稳定性高的特点。     

基于自适应EKF的高动态载波跟踪算法

针对载波跟踪算法在大频偏或动态剧烈变化时易失锁的问题,提出一种无数据辅助情况下基于自适应R/Q扩展卡尔曼滤波(AEKF)的高动态载波跟踪算法。该算法在AEKF代替鉴相器和滤波器的环路结构基础上,引入两倍相位转换来消除数据位跳变的影响,并利用载噪比估计方法和基于加加速度的信号动态监测方法来修正观测噪声协方差(R)和系统状态噪声方差(Q),进而兼顾环路的跟踪精度和动态稳定性。实验结果表明:利用该算法的GPS软件接收机能够在加速度200 g,瞬间加加速度10 000 g/s的动态指标下正常工作。     

引入电流变化率的电源分布网络最差噪声分析算法

随着时钟频率的增加以及电源电压的降低,电源完整性问题日益凸显。将电流变化率加入到最差噪声算法的电流约束中,能够在任意电流变化率的情况下分析电源分布网络的最差噪声,从而获得更加真实的最差噪声。另外,利用改进的Knuth-Yao四边形不等式法对基于动态规划的最差噪声算法进行加速,加速后算法的时间复杂度从O(n~2m)降为O(mnlogn)。     

带时间窗的相控阵雷达实时任务调度方法

为了解决传统相控阵雷达任务调度中采用基于工作方式优先级的方法而存在忽略任务时间紧迫性和重要性的问题,提出了一种基于任务自身工作方式优先级、截止期和空闲时间3个特征参数的相控阵雷达任务调度方法,通过调整参数的权重来适应调度器不同的负载情况,并采用时间窗处理发生冲突的任务请求,确保更多的高优先级任务在调度间隔内被调度。仿真结果表明,所提出的方法能够有效提高任务的调度成功率,明显改善调度器性能。     

Parallel machine scheduling with batch deliveries to minimize total flow time and delivery cost

Motivated by the flow of products in the iron and steel industry, we study an identical and parallel machine scheduling problem with batch deliveries, where jobs finished on the parallel machines are delivered to customers in batches. Each delivery batch has a capacity and incurs a cost. The objective is to find a coordinated production and delivery schedule that minimizes the total flow time of jobs plus the total delivery cost. This problem is an extension of the problem considered by Hall and Potts, Ann Oper Res 135 (2005) 41–64, who studied a two‐machine problem with an unbounded number of transporters and unbounded delivery capacity. We first provide a dynamic programming algorithm to solve a special case with a given job assignment to the machines. A heuristic algorithm is then presented for the general problem, and its worst‐case performance ratio is analyzed. The computational results show that the heuristic algorithm can generate near‐optimal solutions. Finally, we offer a fully polynomial‐time approximation scheme for a fixed number of machines. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 492–502, 2016     

利用实际飞行数据插值的INS/GNSS组合导航仿真轨迹发生器

针对INS/GNSS组合导航仿真中捷联惯导系统陀螺、加速度计信号高精度模拟问题,提出基于实际飞行数据插值的动态轨迹解析生成仿真算法。对转换到地心惯性坐标系中的载体姿态、位置和重力场数据进行关于时间的样条函数插值,得到载体坐标系下陀螺角速率、角增量以及加速度计比力积分增量的高精度分段解析表达式。使生成的陀螺、加速度计信号符合载体运动学和动力学特性,反映杆臂效应影响,同时与经事后处理的实测GNSS伪距、伪距率等数据特征保持一致。提出四元数约束插值算法,其可满足四元数解析插值时范数为1的约束限制条件。基于某实际无人机飞行数据,验证了所提算法的有效性,其完全满足组合导航动态仿真精度要求。该算法也适用于其他高精度高动态导航系统和刚体运动控制仿真中的角运动、线运动传感器信号模拟。     

时间延迟对电视末制导系统稳定性的影响

为了分析时间延迟对捕控指令电视末制导系统稳定性的影响,建立了武器操作员的人工操控响应模型和数据传输模型,并纳入到导弹控制系统中建立了人在回路的捕控指令末制导模型.在分析武器操作员在捕控指令末制导阶段操作的基础上,进行了人在回路的全数字仿真,根据仿真结果分析了时间延迟对电视末制导系统稳定性的影响.     

The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.     

Inventory cost impact of order processing priorities based on demand uncertainty

We evaluate an approach to decrease inventory costs at retail inventory locations that share a production facility. The retail locations sell the same product but differ in the variance of retail demand. Inventory policies at retail locations generate replenishment orders for the production facility. The production facility carries no finished goods inventory. Thus, production lead time for an order is the sojourn time in a single server queueing system. This lead time affects inventory costs at retail locations. We examine the impact of moving from a First Come First Served (FCFS) production rule for orders arriving at the production facility to a rule in which we provide non‐preemptive priority (PR) to orders from retail locations with higher demand uncertainty. We provide three approximations for the ratio of inventory costs under PR and FCFS and use them to identify conditions under which PR decreases retail inventory costs over FCFS. We then use a Direct Approach to establish conditions when PR decreases retail inventory costs over FCFS. We extend the results to orders from locations that differ in the mean and variance of demand uncertainty. The analysis suggests that tailoring lead times to product demand characteristics may decrease system inventory costs. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 376–390, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10016     

银河仿真工作站实时通信技术的研究与实现

对银河仿真工作站与共享内存实时网络的实时通信技术进行了研究 ,介绍了银河仿真工作站与实时网通信的应用程序接口API,并且描述了一个在YHSIM仿真程序中实现与实时网通信的例子 ,最后给出了实验结果。实验证明 ,该技术能有效地用于大规模复杂系统的半实物仿真