坦克外壳对内部电磁波的影响及其振荡干扰波型的数值计算

在坦克的金属立方体盒子模型下,分析了坦克外壳对内部电磁波的影响,并对Lc型电路激发的电磁波在坦克内部形成的振荡波型进行了计算,分析了该类电磁振荡波对坦克内部其他电子元件产生电磁干扰的作用机理,对一种最低频率的谐振波型进行了仿真模拟,提供了对坦克内部电磁波电场分量及磁场分量的一种分析计算方法,为研究坦克内部电子设备的电磁干扰规律提供了思路,对提高坦克的电磁兼容性能具有一定参考意义。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

基于小波变换的海面红外弱小目标检测中实时性研究

针对凝视型红外预警系统在复杂海面背景下对弱小信号检测的实时性问题,提出了压缩监测区域、危险度分级、舍弃小波变换后的低频分量部分和检测图像中的零信号4种优化型算法,减少了系统的运算量,提高了系统的运算速度,满足了系统实时性的要求,并且降低了系统的虚警率,保证了系统对强起伏背景的抑制效果。     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

结合实时数据产品与北斗短报文的厘米级海洋精密相对定位

针对远海精密定位的广泛需求和传统精密定位服务费用昂贵的问题,提出利用北斗短报文设备传输导航观测数据,结合实时服务数据产品,以实现海洋的低成本厘米级精密相对定位。为了克服短报文传输频率低的缺点,采用融合空间相对定位和精密单点定位两种技术来加密分钟间隔以外的坐标,避免了传统时间基线法加密坐标存在的误差累积现象。分别基于静态和动态海洋观测数据进行仿真实验,结果表明,新方法无论在水平方向还是垂直方向上,都可以实现厘米级定位,且对时间间隔不敏感。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Experiment and simulation of launching process of a small-diameter steel cartridge case

In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber pressures. The pressure curves of cartridge chamber are measured in experiment, and the tensile test data of cartridge are loaded into the numerical calculation to compare with the experimental data. The conclusion was obtained that the calculated results match better with the experimental results by considering strain rate bilinear kinematic hardening material constitutive model. The forces on the various parts of the cartridge during launching and their deformation rules are achieved, in which the equivalent plastic strain decreases and the cylinder ring withstands the maximum equivalent stress when the cartridge case clings to the bore from the mouth to the bottom.     

On the continued acceleration of bomb casing fragments following casing fracture

It has been said that, once a bomb casing has fractured, “detonation gases will then stream around the fragments or bypass them, and the acceleration process stops there.” However, while apparently copious gas flow through casing fractures indicates some pressure release, it is also an indication of significant gas drive pressure, post casing fracture. This paper shows two approaches to the problem of calculating the actual loss of drive. One presents first-order analytical calculations, in cylindrical geometry, of pressure loss to the inside surface of a fractured casing. The second shows the modelling of a selected example in the CTH code. Both approaches reveal that gas escape, while occurring at its own sound-speed relative to the adjacent casing fragments, has to compete with rapid radial expansion of the casing. Together with some historic experiments now publicly available, our calculations indicate that post-fracture casing fragment acceleration is, for most systems, unlikely to be reduced significantly.     

基于VC++的坦克模拟车驾驶实时控制系统

坦克模拟车驾驶实时控制系统是坦克(分队)作战仿真系统的重要组成部分.结合科研实践,基于Visual C 语言,着重从系统设计原理、系统实现、系统评价等方面进行分析研究,完成代码编写与硬件接口的联接.实践证明,该系统能够实时准确地对驾驶过程中的数据进行采集和处理,且能够逼真地实现对坦克模拟车的驾驶模拟,系统中所创建的类经过重用,也可以在其他坦克模拟系统的开发和研究中使用,且具有较高的参考价值.