Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

采用滑模控制器提高稳定控制系统快速响应的研究

由于采用传统的稳定控制系统设计方法使得导弹弹体对不同大小指令信号响应的品质特性差异较大,因此主要研究了在传统的稳定控制系统设计方法的基础上,采用滑模变结构控制器来调节控制参数,较好地解决了稳定控制系统对大小指令信号时域响应特性差异较大的问题,提高了稳定控制系统的快速响应能力。     

论高校工会在青年教师师德师风建设中的作用

高校青年教师是高校的生力军,如何加强高校青年教师的师德师风建设,充分调动其积极性和创造性,是高校工会师德师风建设的重点。本文就当前青年教师的特点和高校工会面临的现状,对如何加强高校青年教师师德师风建设提出了具体措施。     

基于支持向量机的彩色图像恢复新方法

引起图像退化的因素众多,因而难以用一个统一的方法来进行恢复处理。鉴于图像的像素和各颜色分量通道间本质上存在某种相关性,以及以支持向量机为核心的统计学习理论具有较好地解决小样本、非线性、高维数问题的能力,提出了一种新的空域图像恢复方法,并通过对来自于待处理图像本身的训练样本的学习,构造自适应的回归插值函数;然后基于该函数对图像作有选择的修改,从而达到图像恢复的目的。实验表明,该方法是有效的,并且具有较好的泛化性能。     

Subspace dynamic‐simplex linear interpolation search for mixed‐integer black‐box optimization problems

Design and management of complex systems with both integer and continuous decision variables can be guided using mixed‐integer optimization models and analysis. We propose a new mixed‐integer black‐box optimization (MIBO) method, subspace dynamic‐simplex linear interpolation search (SD‐SLIS), for decision making problems in which system performance can only be evaluated with a computer black‐box model. Through a sequence of gradient‐type local searches in subspaces of solution space, SD‐SLIS is particularly efficient for such MIBO problems with scaling issues. We discuss the convergence conditions and properties of SD‐SLIS algorithms for a class of MIBO problems. Under mild conditions, SD‐SLIS is proved to converge to a stationary solution asymptotically. We apply SD‐SLIS to six example problems including two MIBO problems associated with petroleum field development projects. The algorithm performance of SD‐SLIS is compared with that of a state‐of‐the‐art direct‐search method, NOMAD, and that of a full space simplex interpolation search, Full‐SLIS. The numerical results suggest that SD‐SLIS solves the example problems efficiently and outperforms the compared methods for most of the example cases. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 305–322, 2017     

基于效用函数的随伴支援炮兵弹药选择模型

随着火炮武器系统的发展,火炮所配属的弹药类型越来越多,针对不同目标选择合适的弹药以达到最佳作战效能具有重要意义。首先,按照"最大化对敌火力效果、最小化附带损伤,最小化费用"的原则,分析了随伴支援炮兵弹药选择模型要考虑的决策指标,包括毁伤比、压制比、非敌伤亡率、安全距离、费用。建立了决策指标的效用函数,在此基础上建立了整体的决策指标,对决策指标的权重系数进行了分析探讨。最后用实例证明该方法是一种有效综合各类因素的弹药选择方法,能够很好地解决弹药选择问题。     

基于邻居时隙切换的时分多址接入协议研究

针对传统TDMA网络节点间业务量不均匀的情况下,会造成信道资源严重浪费的问题,设计了一种基于邻居时隙切换的动态TDMA协议(TDMA protocol based on adjacent timeslot transfer,ATT-TDMA),切换邻居空闲时隙,更改节点业务时隙长度但不影响整个网络循环周期的结构,实现时隙的动态利用。利用OPNET平台搭建仿真模型,并与HFTP协议和TDMA协议作了对比分析。仿真结果表明,相同条件下ATT-TDMA相比HFTP协议和TDMA协议,在消息投递率、平均时延和吞吐量方面具有更优异的性能。     

旋转整流器断路故障诊断分析

阐述了无刷励磁发电机的旋转整流器在正常工况下的换相原理和换相过程,理论解析了旋转整流器在正常和断路工况下的输入电流波形,定量分析了励磁机励磁电流谐波含量,证明了以励磁电流作为旋转整流器故障诊断依据的可行性。仿真和实验验证表明:定量分析谐波含量提高了旋转整流器的故障检测精确性,为无刷励磁发电机系统的故障诊断研究提供了判断依据。     

后勤物资消耗测算系统设计需求分析

针对当前后勤物资消耗测算方法过于简单粗略的问题,以构建有效的后勤物资消耗测算系统为目的,对系统的设计进行了需求分析。介绍了后勤物资消耗测算的基本流程以及关键理论,研究了后勤物资消耗测算系统的用户特点以及应用流程,着重对系统的功能需求进行了分析,确定了系统各主要功能的相关内容,并按照功能需求确定了系统的组成结构和接口关系,为系统的设计和实现奠定了基础。     

圆周SAR与线性SAR成像特性分析与对比

圆周合成孔径雷达因其独特优势已经成为雷达领域的研究热点。分析圆周合成孔径雷达与线性合成孔径雷达在成像区域大小、点散布函数特性、回波频谱特点、三维成像能力等方面的差异,凸显了圆周合成孔径雷达的成像特点。发现单航过圆周合成孔径雷达频域成像处理的难点在于其回波频谱的空变性。为提高频域成像处理的效率,分析了平面圆周合成孔径雷达与多航过圆周合成孔径雷达成像模式,并指出这两种模式易于在频域开展一致化处理。仿真试验证明了分析内容的正确性。