Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

感应式磁性天线设计及干扰抑制算法研究

当期望信号和干扰同方向时,为了有效改善超低频频段的通信质量,提出了一种基于模拟电路预处理和改进广义旁瓣抵消的干扰抑制算法,设计了磁性天线、低噪声前置放大电路,制作了灵敏度较高的磁传感器,有效地抑制了工频及其谐波干扰。鉴于超低频频段的信号十分微弱,在广义旁瓣抵消算法的基础上做了几点改进,为主通道提供较多的参考信息,从而提高了算法的性能,有效地解决了传统算法失效的问题。为了验证所提算法的有效性,在实验室环境下搭建实验平台,设计了多组对照实验,实验结果表明:无论期望信号与干扰是否同方向,改进后的广义旁瓣抵消算法相比原来的算法,在信噪比的提升和噪声底限的降低等方面均有较大程度的改善。     

模糊时滞系统控制器依赖于状态时滞的H∞控制

针对一类非线性时滞系统,研究了该系统基于T—S模糊模型的H∞控制器设计问题。采用线性矩阵不等式LMI的方法,设计一个依赖于状态时滞的模糊控制器,得到了系统存在模糊控制器的充分条件,此充分条件等价于一类线性矩阵不等式的可解性,最后通过仿真说明了控制器的有效性。     

非线性时滞系统模糊控制的一种新方法

针对一类状态变量具有时滞的非线性系统,研究了其模糊控制器的设计问题。采用线性矩阵不等式（LMI）的方法,设计了与状态变量导数有关的模糊控制器,得到了系统存在模糊控制器的充分条件,并利用线性矩阵不等式的解给出具体的形式,最后通过仿真说明了控制器的有效性。     

基于最大故障特征信息熵的测试点优化设计

为解决故障诊断和可测试性设计中普遍存在的测试点优化问题,以相关性矩阵模型为基础,建立了最大故障特征信息熵的优化准则,给出了相应的测试点优化设计方法。应用实例表明：该方法是可行的、正确的,能为武器装备的故障诊断和可测试性设计提供有力的支持。     

传递矩阵法在连续系统中的作用

在分析离散系统振动时,传递矩阵法是一种重要的方法。将传递矩阵法应用到具有分布质量的连续系统中,给出了具有Rayleigh阻尼形式的梁在随机激励作用下响应分析。     

基于灰色关联和D-S证据理论的导弹系统安全性评估

针对导弹系统安全性评价的不确定性问题,提出了将灰色关联和D-S证据理论相结合的方法,从人员安全性、设备安全性和环境安全性建立了综合评估指标体系,用灰色关联分析处理了指标之间的关联性。在传统证据合成公式的基础上,考虑证据集非关键因素的权重,给出了修正的证据合成公式。并以打靶选弹为例进行了计算分析,得出了导弹安全性优先级排序,并将改进算法与传统计算方法的结果进行了比较,验证了评价模型的可行性与实用性,为导弹系统的管理工作提供了有益的参考。     

结合词语规则和 SVM 模型的军事命名实体关系抽取方法?

抽取作战文书中的军事命名实体关系,是实现作战文书语义理解的一种有效方法。在分析作战文书中军事命名实体词语规则的基础上,提出了一种结合词语规则和 SVM 模型的军事命名实体关系抽取方法。首先,使用词语规则整合作战文书中连续出现的军事命名实体并抽取其关系,使其更加适合 SVM 模型。然后,使用 SVM 模型对传统规则模板难以使用的词窗、词性和距离等特征进行建模,抽取军事命名实体关系。实验结果表明,优先利用词语规则能充分提高 SVM 模型抽取军事命名实体关系的效果,与单纯使用 SVM 模型相比,准确率和召回率分别提高了8．73％和41．71％。     

基于邻接矩阵的软件测试环境规划设计方法

在分析软件测试环境的基础上,研究了软件试验中测试用例设计面临的突出问题,从软件测试环境的规划出发,基于有向图的邻接矩阵,设计满足一定覆盖度标准的软件测试环境规划方法,可为软件试验提供技术参考和研究方向。