钢质管道挤压变形过程数值模拟

基于对钢质输油管道挤压变形原理的分析,建立上下刀具加载作用下钢质输油管道挤压变形模型,采用扩展拉格朗日方法求解三维接触挤压问题,完成20号无缝钢挤压变形过程的数值模拟。将模拟试验数据与前人实际试验数据进行对比与验证,模拟结果与实际试验结果吻合。该模型可以用于模拟不同规格管道挤压变形情况,得到管道挤压变形的位移、载荷和应力分布规律,为管道应急抢修提供理论和实践依据。     

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with gra-phene platelets are studied in this paper. The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak's foundation. Sinusoidal shear deformation theory is used to describe displacementfield. Four different distribution patterns are employed in our analysis. The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters. The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers, weight fraction and two parameters of Pasternak's foundation.     

On vibration analysis of functionally graded carbon nanotube reinforced magneto-electro-elastic plates with different electro-magnetic conditions using higher order finite element methods

This article deals with evaluating the frequency response of functionally graded carbon nanotube rein-forced magneto-electro-elastic (FG-CNTMEE) plates subjected to open and closed electro-magnetic cir-cuit conditions. In this regard finite element formulation has been derived. The plate kinematics adjudged via higher order shear deformation theory (HSDT) is considered for evaluation. The equations of motion are obtained with the help of Hamilton's principle and solved using condensation technique. It is found that the convergence and accuracy of the present FE formulation is very good to address the vibration problem of FG-CNTMEE plate. For the first time, frequency response analysis of FG-CNTMEE plates considering the effect of various circuit conditions associated with parameters such as CNT dis-tributions, volume fraction, skew angle, aspect ratio, length-to-thickness ratio and coupling fields has been carried out. The results of this article can serve as benchmark for future development and analysis of smart structures.     

梁纯弯曲的大变形分析

在平面应力问题中 ,分析了在梁端截面作用沿高度线性分布外力时纯弯梁大变形的几何非线性问题。给出了纯弯曲应力的精确解 ,并用欧拉法得到了位移的近似解。当泊桑比为零时 ,求得位移的精确解。     

Strain concentration caused by the closed end contributes to cartridge case failure at the bottom

Ruptures at the bottom of cartridges are a common cause of failure of ammunitions, which directly threatens the safety of weapons and shooters. Based on plastic tube theory, this study analyses the radial and axial deformation of a cartridge, considering the radial constraint of the closed end at the bottom of the cartridge. Owing to the influence of the closed end, the bottom of a cartridge does not establish complete contact with the chamber. Owing to strain concentration in the non-contact area, this area is more amenable to the occurrence of cartridge rupture. This theory predicts the location of the fracture more accurately than the traditional theory. The maximum axial deformation of a cartridge comprises bending and friction deformation. The maximum strain at the bottom of the cartridge increased by 135% owing to the introduction of bending strain caused by the closed end. The strain distribution of a cartridge was measured using digital image correlation technology, and the measured result was consistent with the predicted results of the bending deformation theory and rupture case. The effects of wall thickness, radial clearance, friction coefficient, and axial clearance on the axial deformation of the cylinder were studied. Increasing the wall thickness and reducing radial clearance were found to reduce bending deformation; furthermore, lubrication and reduction in axial clearance reduce frictional deformation, which in turn reduce cartridge rupture.     

关于有限变形非弹性有限单元法的研究进展

对有限变形非弹性有限单元法研究发展中的一些普遍关注的研究课题,进行了回顾和展望。这些课题包括:不同参考构形下的有限元列式、客观性应力率的合理定义、有限变形非弹性本构方程的精确描述、率本构方程的增量客观数值积分、塑性流动的不可压缩性与自锁现象、以及交界面接触与摩擦的处理。     

几何约束的改进弹性体网格变形方法研究及应用

针对现有弹性体网格变形方法无法有效抑制网格单元出现"负体积"和过度畸变等问题,引入体积弹性模量约束和挤压弹性模量约束,提出一种基于几何约束的改进弹性体法。借助Patrick网格质量参数,选取三维长方体边界在旋转、平移和伸展变形三种方式下的大幅度运动,对比研究引入几何约束后的改进效果。仿真计算二维NACA0012翼型的俯仰振荡和三维伸缩翼变形过程的气动特性,结果表明:基于几何约束的改进弹性体法显著提高了变形网格的鲁棒性,尤其在大变形时能够有效约束较差网格单元,改善经典方法存在的问题,可为非定常流场问题的求解提供有力支撑。     

自由变形技术在RAE2822翼型优化设计中的应用

采用自由变形技术实现对RAE2822跨声速翼型表面的参数化,采用试验设计方法对设计参数进行计算流体力学数值模拟样本训练,最后采用Kriging代理模型和MIGA、NLPQL优化算法进行优化分析,将得到的优化变量进一步进行计算流体力学分析获得最后的优化结果。计算结果显示,自由变形参数化方法简单易行,可实现直接对网格的变形;优化的结果相比于原始翼型,升阻比增加了57. 2%,从而证明了本文方法的可行性和有效性。     

空间非合作目标贴近扫描观测的制导方法研究

随着微小卫星技术的不断发展,对目标航天器的近距离观测已成为一类新的航天任务,在空间态势感知、在轨服务等方面具有重要作用和广泛应用前景。针对大型空间非合作目标的近距离扫描观测问题,提出了一种基于改进的人工势场法的制导方法,设计了平行于目标区域表面的引力场函数和垂直于目标区域表面的斥力场函数,由引力场来提供前进的加速度,并满足成像拖影量的约束,由斥力场来处理分辨率和碰撞避免约束。所得到的观测航天器轨迹能够很好地跟随目标区域形状,实现对空间非合作目标区域连续稳定的扫描观测,且所需要的速度增量不大,计算量较小,便于星上执行。     

电控喷油器控制柱塞偶件高压变形与泄漏分析

为准确选取柱塞偶件的间隙,简述了喷油器柱塞偶件间隙要求,分析了高压油压泄漏的影响因素,给出了柱塞偶件的受力和泄漏的数学模型,采用ANSYS仿真软件对某柴油机电控喷油器柱塞偶件进行变形分析,对比不同条件下的柱塞的变形量和配合间隙变化,并根据变形量计算出对应的泄漏量。以变形量和泄漏量为衡量指标,给出合理间隙的柱塞偶件方案。