IDEF0方法在军事综合电子信息系统分析设计中的应用

就IDEF0方法在军事综合电子信息系统分析设计、系统升级与集成及仿真等方面的应用进行了深入探讨。由于IDEF0模型具有简单、全面且描述能力强等优点 ,使其在多个领域尤其在制造业中得到了广泛应用。军事综合电子信息系统是以活动为支撑 ,以信息为基础的复杂大系统 ,用IDEF0模型对其进行描述可以加深指挥人员和技术人员对系统的共同理解 ,从而提高系统开发的效率并提高系统的实用性。     

多级可修备件库存的生灭过程建模与优化

针对VARI-METRIC模型在低可用度下结果不准确的问题,建立基于生灭过程的任意等级、任意层级可修件库存优化模型。通过对各级站点、各类备件需求率与到达率的预测,对每个部件建立其生灭过程模型,并提出基于生灭过程的装备可用度计算方法。以整个保障系统的装备可用度为约束指标,以备件总购置费最低为目标,利用边际算法得到最优备件配置方案,并建立仿真模型对所得优化方案进行评估与调整。结合算例,以仿真结果作为检验标准,选取权威的VMETRIC软件与该解析模型在优化性能、计算精度及适用性上进行对比和说明。结果表明,无论是解析模型还是VMETRIC软件,均存在一定的适用范围,而采用解析与仿真相结合的方法无疑具有更强的适应性。     

Optimal service and arrival rates in Jackson queueing networks

In this paper we present an algorithm for solving a class of queueing network design problems. Specifically, we focus on determining both service and arrival rates in an open Jackson network of queueing stations. This class of problems has been widely studied and used in a variety of applications, but not well solved due to the difficulty of the resulting optimization problems. As an example, consider the classic application in computer network design which involves determining the minimum cost line capacities and flow assignments while satisfying a queueing performance measure such as an upper limit on transmission delay. Other application areas requiring the selection of both service and arrival rates in a network of queues include the design of communication, manufacturing, and health care systems. These applications yield optimization problems that are difficult to solve because typically they are nonconvex, which means they may have many locally optimal solutions that are not necessarily globally optimal. Therefore, to obtain a globally optimal solution, we develop an efficient branch and bound algorithm that takes advantage of the problem structure. Computational testing on randomly generated problems and actual problems from a health care organization indicate that the algorithm is able to solve realistic sized problems in reasonable computing time on a laptop computer. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 1–17, 2000     

Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure

The opportunistic maintenance of a k‐out‐of‐n:G system with imperfect preventive maintenance (PM) is studied in this paper, where partial failure is allowed. In many applications, the optimal maintenance actions for one component often depend on the states of the other components and system reliability requirements. Two new (τ, T) opportunistic maintenance models with the consideration of reliability requirements are proposed. In these two models, only minimal repairs are performed on failed components before time τ and the corrective maintenance (CM) of all failed components are combined with PM of all functioning but deteriorated components after τ; if the system survives to time T without perfect maintenance, it will be subject to PM at time T. Considering maintenance time, asymptotic system cost rate and availability are derived. The results obtained generalize and unify some previous research in this area. Application to aircraft engine maintenance is presented. © 2000 John Wiley & Sons;, Inc. Naval Research Logistics 47: 223–239, 2000     

基于测高精度最优值的星载分布式InSAR编队构形设计方法

编队构形设计是分布式干涉SAR系统总体设计的关键问题,它必须紧密结合系统性能评价和编队运动规律进行。针对星载分布式干涉SAR的双站、斜视、空间基线等特点,以主星带辅星群分布式InSAR为例,建立干涉测高精度与基线矢量的关系;以直角坐标过渡,建立基线矢量与卫星间轨道根数差的关系,从而建立了测高精度与卫星轨道根数差的关系;以雷达工作的中间时刻达到测高精度最优值为设计准则,得到双星和多星编队设计方法;仿真分析表明根据上述设计方法得到的优化编队构形,其测高性能要优于干涉车轮和干涉钟摆编队。     

环形串联直缸发动机配气系统设计

环形串联直缸发动机具有功率密度高、惯性力小等诸多优点,但其运行时气缸转子始终绕输出轴周向转动,使得传统发动机静态的配气方法不再适用。因此,研究设计一种能够满足该型发动机进排气需求的新型配气系统意义重大。针对该型发动机独特的环形串联结构和差速运动特性,研究了各转子气缸的容积变化规律,分析了各转子气缸进排气相位与转子转角之间的关系,创新设计了一种基于气道复用的动态位置配气系统。根据二冲程发动机配气方案设计加工了配气系统零部件,并通过高压气动实验完成了对该型发动机的动态进排气过程。实验结果表明,当给定外加驱动气压0.25 MPa时,发动机能够以约200 r/min的速度稳定运转,有效验证了该配气系统的可行性。     

用于DDR3访存优化的数据缓冲机制

为提高DDR3控制器访存效率,设计了基于DDR3存储器预取访问数据长度的数据缓冲机制,将访存请求分为三种基本类型并分别排队处理,降低数据丢弃和实际动态随机访问存储器访问发生次数。针对图像和视频类应用程序的实验结果表明,相对于传统先到先服务的DDR3访存控制器,该机制取得了平均21.3%、最好51.3%的性能提升,硬件开销在可接受范围内。     

基于OPNET的战场IPV6通信网络拓扑设计及仿真

为了对IPv6与IPv4共存期间进行可靠通信提供技术上的参考,基于OPNET仿真平台,设计了几种不同的战场IPv6通信网络拓扑,强调了其特点和关键技术,突出了其仿真的主要参数配置,并通过分析仿真数据,对网络的有效性、实时性、可靠性等性能参数进行了评估,从而验证了所设计拓扑的可行性.     

并行设计技术在模拟训练仪研制中的应用

针对模拟训练仪传统开发方法中存在的问题,在新一代产品研制过程中引入并行设计方法.阐述了并行设计技术的基本概念,详细研究了并行设计技术在需求论证、概念设计、详细设计、工艺设计、生产和调试等各个阶段的具体应用,总结了并行设计中采用的建立协同工作环境、建立并行开发模型、建立产品数据库等关键技术,并指出了影响并行技术有效实施的关键所在.结果表明,与串行设计方法相比,并行设计方法的应用缩短了研制周期,提高了设计制造质量,降低了成本,取得了较好的经济效益和用户满意度.     

飞机飞行控制律多目标优化设计研究

针对传统飞行控制律参数单目标优化设计不能同时满足多控制指标要求,且与飞行品质要求缺乏相关性,物理意义不明确等缺点,提出了一种基于改进NSGA-II算法的飞行控制律多目标优化设计方法。在该算法中提出了一种分化进化策略,使得进化搜索过程中染色体群可以自适应分化为数量和构成动态调整的子群,避免了多染色体子群对局部最优区域的重复搜索,维持染色体的多样性,有效抑制了早熟收敛现象发生。最后,使用改进的NSGA-II算法对某型飞机横航向控制律设计进行数值仿真,结果显示提出算法有效提高控制律优化调参效率,结果满足期望的飞行品质要求。