Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.     

一种基于条件概率的设备占用率修正算法

简要介绍了某型无人机维修级别分析中的组合方案法 ,针对传统分析法中设备占用率采用经验值 ,造成可信度低的问题 ,提出了一种基于不同故障模式发生时的条件概率求解设备占用率的算法 ,并给出了这种算法的适用范围。     

导弹装备战场抢修交互式电子技术手册的制定

导弹装备战场抢修中无法快速、准确地在大量的纸质技术资料中找到所需技术信息,必须将其转换为电子文档,并设计导弹装备战场抢修交互式电子手册(IETM)。采用了基于贝叶斯网络诊断战场损伤的快速评估方法,以及面向任务的基于抢修经验与决策理论相结合的综合评价与决策方法,完成了该交互式电子手册的设计及相关功能的实现。该交互式电子手册能保证导弹装备在战场抢修中快速、准确找到所需技术信息的问题,提高了装备的维修效率,并对其他大型复杂装备交互式电子手册的设计也有指导和借鉴意义。     

飞机战伤修理分析与实施

提出了飞机战伤修理分析的程序和方法,论述了战饬修理应具备的条件及实施步骤。同时也提出了我空军在战饬修理建设方面的一些建议。     

石油钻杆接头螺纹的数控修复加工系统

分析了石油钻杆接头螺纹数控修复加工的关键问题.提出了工件的寻位算法和加工余量的自动分配方法,介绍了刀具路径的动态校正方法,解决了工件不定位的情况下进行数控加工的问题.在此基础上,建立了石油钻杆接头螺纹的数控修复加工系统.     

考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型。根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法。该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等因素之间的量化关系,可以用于预测均匀腐蚀条件下船体结构寿命,也可以反过来指导腐蚀防护系统设计指标的选择和船体结构维修策略的确定。     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Some aspects in estimating warranty and post‐warranty repair demands

When customers buy a product, they are often eligible for free repairs for a certain warranty period. In this article, we study some important aspects, which are often overlooked in the literature but are of interest to the manufacturer, in estimating both warranty and post‐warranty repair demands. We consider that the installed base of the product (i.e., the number of units of the product actually in use) varies with time due to both new sales and units being taken out of service. When estimating warranty and post‐warranty repair demands, we explicitly address the fact that customers may not always request repairs for failed units. For the case where the product failure time distribution is exponential, we derive the closed‐form expressions for both types of repair demands of a single unit and of the time‐varying installed base. The insights into some risk‐related quantities are also presented. Furthermore, the proposed model is extended by considering delayed warranty claims that are frequently seen in practice. Numerical examples illustrate that understanding both types of repair demands and the related decision variables is important for managing the obligatory and profitable repair services. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 499–511, 2013     

海湾战争与舰船维修

在论述舰船战时雏修保障重要作用的基础上,总结了美海军在海湾战争中实施战前检修及战时抢修的基本活动和经验,提出了我军舰船战时维修保障建设的基本思路及措施。