空域窗射击舰炮火力分布方法

空域窗射击方式是近程防御舰炮武器提高对高速复杂机动反舰导弹射击效力的有效途径,研究论证舰炮射击区域内射弹分布方法是实现舰炮空域窗射击的关键。运用射击效力分析方法,从“软”、“硬”两个途径,研究了射击诸元分布法和炮管预置角法两种空域窗射击火力分布方法,对其火力分布方式、范围及火力密度进行了研究,可为舰炮研制及使用提供参考。     

恒加试验的最优线性不变估计

给出了恒加试验的最优线性无偏估计与最优线性不变估计。与有关文献给出的二步估计相比,这两个估计有较大改进,并且在计算上简单可行。     

装备使用阶段后续备件采购模型Π:可修复件

针对装备使用阶段可修复件的采购优化问题,引入近似拉普拉斯需求概率分布代替正态分布,建立了采购间隔期内的备件短缺函数。根据供应链系统库存控制论,建立了可修备件的采购模型。通过对可修件周转渠道的分析,对采购短缺指标进行了修订,并给出了最优采购点和采购量的计算方法。对两种需求分布下的算例结果进行了对比和分析,结果表明:该模型得到的结果鲁棒性强、偏差小,优化过程简单,为故障率高、消耗量低的可修件采购方案的确定提供了一种新的思路。     

Weibull 分布场合下恒定应力加速寿命试验的保序估计

讨论了Ｗｅｉｂｕｌ场合下恒定应力加速寿命试验的最优线性无偏估计及保序估计,获得了保序估计的表示式,并给出了一个模拟例子．     

A nonparametric Bayes approach to decide system burn-in time

Burn-in is the preconditioning of assemblies and the accelerated power-on tests performed on equipment subject to temperature, vibration, voltage, radiation, load, corrosion, and humidity. Burn-in techniques are widely applied to integrated circuits (IC) to enhance the component and system reliability. However, reliability prediction by burn-in at the component level, such as the one using the military (e.g., MIL-STD-280A, 756B, 217E [23–25]) and the industrial standards (e.g., the JEDEC standards), is usually not consistent with the field observations. Here, we propose system burn-in, which can remove many of the residual defects left from component and subsystem burn-in (Chien and Kuo [6]). A nonparametric model is considered because 1) the system configuration is usually very complicated, 2) the components in the system have different failure mechanisms, and 3) there is no good model for modeling incompatibility among components and subsystems (Chien and Kuo [5]; Kuo [16]). Since the cost of testing a system is high and, thus, only small samples are available, a Bayesian nonparametric approach is proposed to determine the system burn-in time. A case study using the proposed approach on MCM ASIC's shows that our model can be applied in the cases where 1) the tests and the samples are expensive, and 2) the records of previous generation of the products can provide information on the failure rate of the system under investigation. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 655–671, 1997     

VLF/LF大气噪声模拟

由于无线电大气噪声所涉及的现象非常复杂,观测结果又具有局限性,所以它的理论分析比较困难。本文通过对大气噪声特性的分析,指出影响大气噪声的主要参数,并利用噪声特征经典分析模型建立了仿真模型。最后对模拟数值和实测数据进行了比较,结果证明,模拟数据与观测数据有较好的一致性。     

用遗传算法实现雷达网目标分配

通过对雷达网目标分配问题的深入研究,建立了数学模型.为了获得发现概率最大的目标分配方案,引入了遗传算法来对模型求解,并给出了实现的步骤和方法.最后经过验证,证明该方法应用在雷达网目标分配问题上切实可行.     

舰载电子设备电缆布线设计

本文介绍了舰载电子设备电缆布线设计技术及其基本原则。论述了电缆布线设计与电磁兼容的关系,以及电缆布线设计与电缆布线施工一致性的关系。提出了电子设备电缆布线设计的基本方法,并提出了通过电缆布线设计解决电磁兼容问题的方法。     

On the median residual lifetime and its aging properties: A characterization theorem and applications

This paper is devoted to study several aspects of the median residual life function (MERLF). In reliability studies, it is well known that, although the MERLF have several advantages over the mean residual life function (MRLF), the MRLF has the good property of uniquely determine a life distribution whereas either the median residual life function (MERLF) or an α‐percentile residual life do not have such good property. We shall give a characterization result where knowledge of both the MERLF and the survival function on an interval does uniquely determine the distribution. Moreover, in order to apply this characterization in practical situations, we propose a method to estimate the necessary information of the survival function. Relationships between analytical properties of the survival function and its associated MERLF are also obtained. Bryson and Siddiqui [J Am Statist Assoc 64 (1969), 1472–1483] proved relationships among seven criteria for aging, out of which two contained the MRLF (decreasing MRLF and net decreasing MRLF). In this paper, we prove that the same pattern of relationships holds if the MRLF is replaced by the MERLF. We also examine the aging criteria corresponding to an increasing MERLF and show that there is no relation between the behavior (increasing or decreasing) of the MERLF and of the MRLF. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Production/distribution system design with inventory considerations

This study addresses the design of a three‐stage production/distribution system where the first stage includes the set of established retailers and the second and third stages include the sets of potential distribution centers (DCs) and potential capacitated suppliers, respectively. In this problem, in addition to the fixed location/operating costs associated with locating DCs and suppliers, we consider the coordinated inventory replenishment decisions at the located DCs and retailers along with the appropriate inventory costs explicitly. In particular, we account for the replenishment and holding costs at the retailers and selected DCs, and the fixed plus distance‐based transportation costs between the selected plants and their assigned DCs, and between the selected DCs and their respective retailers, explicitly. The resulting formulation is a challenging mixed‐integer nonlinear programming model for which we propose efficient heuristic solution approaches. Our computational results demonstrate the performance of the heuristic approaches as well as the value of integrated decision‐making by verifying that significant cost savings are realizable when the inventory decisions and costs are incorporated in the production distribution system design. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 172–195, 2012