纤维缠绕复合材料夹芯圆柱体高应变率压缩吸能机理

为研究纤维缠绕复合材料夹芯圆柱体吸能元件在高应变率冲击压缩载荷作用下的变形损伤模式和能量吸收机理,采用ABAQUS商用有限元软件和分离式Hopkinson压杆装置开展数值模拟分析和试验验证研究。对比分析宏观力学响应规律和微观损伤破坏机理,可知吸能结构元件在高应变率压缩载荷下的力学响应具有典型的弹塑性特征,内部芯材主要产生压缩塑性损伤,而表层复合材料沿环向产生拉伸断裂破坏。研究表明,该吸能元件冲击压缩吸能特性优异,可满足水下结构平台的冲击防护和浮力储备要求。     

基于程度分析法的消防安全评价

为了控制和防范火灾的发生,减少其对人民和社会的威胁,对建筑物进行更为准确、高效的火灾风险评估十分必要。在层次分析法的基础上,选取不同层次的评价者,采用程度分析法对建筑消防安全指标的安全度和权重进行评估,然后根据各个指标的安全度和权重的评估值得到建筑的安全度,最后运用程度分析法对某购物广场的消防安全度进行了评估。评价结果说明程度分析法脱离了以往专家打分的方法对评价者要求过高的束缚,同时比专家打分的方法具有更好的稳定性,是对消防安全评价方法的一个补充。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

921A 钢结构低周疲劳裂纹扩展特性试验研究

采用预制缺口的平板和加筋板结构试样,对 921A 钢进行了拉伸疲劳载荷作用下的低周疲劳试验得到了拉伸疲劳载荷作用下舰体结构破口裂纹扩展规律,提出了破损舰体结构在疲劳载荷作用下裂纹开裂和后续扩展的判据.该试验结果可直接用于分析和预报破损舰船结构在波浪中航行时的裂纹扩展情况,并为破损舰船的剩余疲劳寿命预报奠定了基础.     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

装备维修中备件需求率的预计方法

通过研究装备维修过程中器件的固有可靠性和维修性,着重分析了影响维修器件需求率的主要因素.利用系统建模和仿真的方法,分别针对耗损类型器件和可修复类型器件建立了相应的需求数学模型,最后给出了维修备件需求率的预计方法.     

速率陀螺解相遇与敌我态势的关系

根据敌我相对运动的原理,导出速率陀螺测量出的目标俯仰角速度Ω_s、测向角速度Ω_L 和探测器测出的距变率与敌我姿势要素间的关系,提出了距变率在极短时间内保持不变的条件;并利用Ω_s、Ω_L 和有关数据(qw,ε、D、■、V_w、K_w)推导出在不满足“快解”条件时计算目标运动要素和弹丸发射诸元的计算公式。     

金属风暴武器射速与命中概率关系研究

基于对超音速、高超声速导弹的防御需求,从研究未来空域窗发射体制入手,利用"金属风暴"武器所具有的超高射速能力,通过分析超高射频弹幕武器在对空防御过程中的作战效能,计算目标命中概率与武器射速之间的关系,从而提高了发射系统的作战效能.并对发射系统的配置提出了理论上的要求.     

Optimal burn‐in procedure for periodically inspected systems

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we study burn‐in procedure for a system that is maintained under periodic inspection and perfect repair policy. Assuming that the underlying lifetime distribution of a system has an initially decreasing and/or eventually increasing failure rate function, we derive upper and lower bounds for the optimal burn‐in time, which maximizes the system availability. Furthermore, adopting an age replacement policy, we derive upper and lower bounds for the optimal age parameter of the replacement policy for each fixed burn‐in time and a uniform upper bound for the optimal burn‐in time given the age replacement policy. These results can be used to reduce the numerical work for determining both optimal burn‐in time and optimal replacement policy. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

一类半线性抛物型方程组解的爆破速率估计

研究了一类具有不同类型反应项的半非线性抛物型方程组初边值问题,这类模型主要描述两种物质燃烧过程中的热传递规律。通过运用古典计算技巧和偏微分方程的定性分析手法,得到了这类半非线性抛物型方程组初边值问题解的爆破速率估计。