紊流时输油管道油流静电带电计算研究

对紊流条件下输油管道内油流静电带电的计算进行了研究。在合理简化紊流扩散系数和油流速度的基础上,推导出油内有关油流带电的电荷输运方程的解析解,并且根据该解析解导出了冲流电流计算公式。该计算公式同时适用于所有电导率范围内液体介质冲流电流的计算。最后利用文中推出的计算公式对一实验油道的油流带电进行了计算,结果显示公式得到的值和实验值非常吻合。     

一种基于灰色粒子滤波算法的机动AUV航深内测方法

本文提出了一种将灰色预测和小波变换与标准粒子滤波相结合的灰色粒子滤波算法（GPF）,并将其应用于机动AUV的航深内测。GPF针对机动AUV航深内测过程中由于AUV运动状态未知和测量噪声不断变化而导致的滤波失效问题,在粒子采样过程中结合了标准采样和灰色预测采样,保证了采样得到充分多的有效粒子。在计算粒子权重时,利用小波变换跟踪测量噪声统计特性的变化,提高了各粒子似然概率计算和权重分配的正确性。最后以外测法测得的高精度的机动AUV航深作为真实航深,对该GPF算法进行了实验对比验证,并与EKF和MMPF算法的结果作对比,实验结果表明了本文方法的有效性和实用性。     

基于轴对称内聚力单元的立贮发动机黏接界面结构完整性分析

建立轴对称内聚力单元是进行立贮发动机黏接界面应力分析的重要手段。在变形后的轴对称内聚力单元上建立参考坐标系,推导了单元节点位移在参考坐标系和全局坐标系下的转换关系。基于单元分离位移推导了单元内力矢量和单元刚度矩阵。开展了旋转体的分离测试,验证了轴对称内聚力单元的准确性和高效性。针对立贮发动机,先后开展了轴向加速度以及波浪载荷作用下的发动机结构分析,重点研究了黏接界面上应力的大小以及分布规律。研究方法和结论可以为发动机黏接界面结构分析提供有利参考。     

The properties of Sn–Zn–Al–La fusible alloy for mitigation devices of solid propellant rocket motors

The Al and La elements are added to the Sn9Zn alloy to obtain the fusible alloy for the mitigation devices of solid propellant rocket motors. Differential scanning calorimetry (DSC), metallographic analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), tensile testing and fracture analysis were used to study the effect of Al and La elements on the microstructure, melting characteristics, and mechanical properties of the Sn9Zn alloy. Whether the fusible diaphragm can effectively relieve pressure was investigated by the hydrostatic pressure at high-temperature test. Experimental results show that the melting point of the Sn9Zn-0.8Al0·2La and Sn9Zn–3Al0·2La fusible alloys can meet the predetermined working temperature of ventilation. The mechanical properties of those are more than 35% higher than that of the Sn9Zn alloy at −50 °C–70 °C, and the mechanical strength is reduced by 80% at 175 °C. It is proven by the hydrostatic pressure at high-temperature test that the fusible diaphragm can relieve pressure effectively and can be used for the design of the mitigation devices of solid propellant rocket motors.     

Influence of shaped charge structure parameters on the formation of linear explosively formed projectiles

The research of LEFP (linear explosive forming projectile) is of great value to the development of new warhead due to its excellent performance. To further improve the damage ability of the shaped charge warhead, a special shell overhanging structure was designed to increase the charge based on the traditional spherical charge, in which case the crushing energy of LEFP could be guaranteed. LS-DYNA was used to simulate different charge structures obtained by changing the number of detonation points, the length of shell platform, the radius of curvature and the thickness of liner. The RSM (response surface model) between the molding parameters of LEFP and the structural parameters of charge was established. Based on RSM model, the structure of shaped charge was optimized by using multi-objective genetic algorithm. Meanwhile, the formation process of jet was analyzed by pulsed X-ray photography. The results show that the velocity, length-diameter ratio and specific kinetic energy of the LEFP were closely related to the structural parameters of the shaped charge. After the optimization of charge structure, the forming effect and penetration ability of LEPP had been significantly improved. The experimental data of jet velocity and length were consistent with the numerical results, which verifies the reliability of the numerical results.     

Effects of module number and firing condition on charge thermal safety in gun chamber

Thermal safety of modular charge which is fed into and retained in the chamber after gun fires consecutively is first investigated with cook-off method.A two-dimensional cook-off model of modular charge in gun chamber is established and the cook-off process of modular charge in gun chamber is numerically simulated.Then the effects of module number and firing condition on charge thermal safety are evaluated by researching the cook-off response characteristics of modules.The results show that,under conditions of different module numbers the cook-off responses all occur on the module closest to the boundary of missile,and the single-base propellants located at the inner surface of cartridge ignite first.When the number of loaded module changes from 1 to 6,the cook-off response temperatures vary little,only in a small range of 478.1 K-482.4 K.The cook-off response times decrease logarithmically in the range of 211.2 s-166.7 s with the increasing length of residual air gap in gun chamber.The simulation results are well matched with the experimental data.Furthermore,different firing conditions have great influence on the cook-off response time,minor influence on the initial response position and little in-fluence on the response temperature.Under the three conditions of consecutive 32 launches with 5 rounds/min,43 launches with 1 round/min,and 41 launches with different firing frequencies,the cook-off response temperatures are 479.2 K,481.1 K and 479.9 K respectively and the response times are 709.2 s,211.2 s and 214.4 s respectively.The response position is near the middle area of the inner cartridge surface in the former condition and near the right area in the latter two conditions.     

近程简易控制火箭末修的效率分析

阐述了脉冲控制力实施简易控制的特点,针对某近程单兵火箭建立了其弹道模型,在弹体周向布置两种大小不同的脉冲发动机,采用两种脉冲延时分级控制的控制策略对其实施简易控制,对其控制时刻、转速影响、分档设计等进行了分析证明对该单兵火箭实施简易控制是可行的.     

对单兵火箭提前修正量的分析研究

为了实现某型单兵火箭的射击在陆军分队作战模拟仿真系统中的仿真模拟,运用数理统计理论对单兵火箭提前修正量进行分析研究,论证了单兵火箭的射程与提前修正量的一元线性回归分析的统计规律,给出了一元线性回归方程和提前修正量的置信区间,论证了在置信区间中的实际提前修正量的射击的弹着点符合正态分布的射击规律和散布律公式。根据得到的理论结果,指导模拟仿真系统对单兵火箭的射击进行仿真模拟。     

大长径比固体火箭发动机点火瞬态过程数值分析

研究大长径比固体火箭发动机点火瞬态特性,采用守恒型N S方程描述了集点火器、燃烧室和喷管于一体的数学仿真模型,应用NND-3差分格式进行数值求解,计算结果表明,点火期间,发动机内除了压强急升之外,还存在振荡和拍击现象。     

助飞鱼雷攻潜时两种引导定位方法误差分析

水面舰艇使用助飞鱼雷攻潜时,可以利用舰载声纳系统或舰载直升机吊放声纳系统分别对目标潜艇进行定位并引导舰艇攻击潜艇,本文建立了这两种目标定位方法的散布误差模型,并在仿真计算的基础上,比较分析了两种定位引导方法目标散布误差的优劣,为助飞鱼雷攻潜指挥决策提供了依据,对提高助飞鱼雷作战效能具有指导意义。