三组元液体火箭发动机实现单级入轨的优化分析

建立了三组元液体火箭发动机性能计算模型、单级入轨可重复使用运载器质量模型和弹道模型,以起飞质量为目标函数,优化得到了实现单级入轨的发动机基本参数。结果显示:三组元发动机性能比氢氧发动机高10%。本研究是三组元发动机系统设计和分析的基础。     

火箭发动机控制活门动态特性模拟与测试

根据电动活门的工作原理和采样定律，通过活门等效器ＤＸＱ－１的设计，介绍了火箭发动机控制活门动态特性模拟与测试，分析了电路参数选取和设计的基本依据，并给出了有关的理论分析结果。     

液体火箭发动机故障诊断的命题逻辑方法

为对液体火箭发动机诊断知识的表达和组织提供一种简洁有效和易于处理的方式 ,通过以命题逻辑公式和子句的形式对系统观测信息和定性特征加以描述建立定性诊断模型 ,同时诊断问题基于归结原理和假言推理规则的演绎推理方法求解。基于试车数据的诊断结果表明方法具有较强的诊断能力。     

伞盘结构对大长径比发动机药柱结构完整性的影响

为了提高大长径比发动机药柱结构完整性水平,基于三维黏弹性有限元法,计算某大长径比固体发动机在温度和内压荷载联合作用下的结构响应;研究伞盘结构及其位置对药柱最大Von Mises应变的影响规律;讨论当伞盘位于药柱中部时,伞盘最大Von Mises应变随伞盘宽度、深度以及顶部圆弧半径比的变化规律。结果表明,伞盘位于药柱中部时可以有效地降低大长径比药柱的最大Von Mises应变,增加伞盘宽度、深度或选取合适的半径比均可降低伞盘结构的最大Von Mises应变。所得结论可为固体发动机设计提供参考。     

无限大均匀介质中电荷间的相互作用力

本文对无限大均匀介质中电荷的受力情况进行了分析.分析结果表明无限大均匀介质中两个自由的点电荷之间的相互作用力服从介质中的库仑定律.     

多次点火固体火箭发动机在面空导弹上的应用研究

论述了多次点火固体火箭发动机的多次点火的最佳控制,具体研究了两次点火固体火箭发动机的参数对飞行性能的影响,对两次点火固体火箭发动机结合弹道同时最佳化问题给出了仿真结果.     

关于设置高校学生辅导员专业的思考

新时期党的思想政治工作对高校学生辅导员工作提出更高的要求。设立辅导员专业 ,实现辅导员职业化 ,建立一支高素质的辅导员队伍 ,是高校改革与发展的必然趋势。     

鱼雷雷体特性对其惯性深控系统阶跃响应的影响

分析、对比了两种鱼雷雷体特性对惯性深控系统阶跃响应的影响 ,从中找出对鱼雷定深航行稳定性有较大影响的雷体参数 ,可以为鱼雷总体优化设计提供一定的参考     

基于系统构型替换的固冲发动机故障模式半实物仿真

为全面快速验证冲压发动机的故障检测算法,基于构型替换建立了能模拟多种固冲发动机故障的仿真验证平台。基于此平台,搭建了发动机点火故障模型、压强传感器故障模型、设备接口模型,以及与真实控制器中检测算法具有相同外部接口和系统构型的故障检测算法模型等。通过系统构型的切换,将同一个故障模式注入故障检测算法模型和真实发动机系统,并通过对比同一组故障模式下故障检测模型检测结果与发动机控制系统检测结果,来对发动机控制器中的故障检测算法进行快速验证。以无喷管助推器点火的检测为例,讲述了该方法的建模、实验验证及分析过程,此外,该方法还能应用到无喷管助推器关机、进气道前后堵盖打开、燃气发生器点火、燃气流量容错控制等多个故障模式的仿真模拟与验证,具有很强的通用性,能大大地降低控制系统开发与验证的时间成本,具有很强的应用价值。     

Formation and impact-induced separation of tandem EFPs

The formation and separation behaviors of tandem EFPs are studied by the combination of experiments and simulations. The results show that different formation and separation processes can be obtained by adjusting the double-layer liners, and simulations agree with experiments well. Then, the interaction process between the two liners is discussed in details, and the formation and separation mechanism are revealed. It can be found that there are four phases in the formation and separation processes, including impact phase, propulsion phase, slide phase and free flight phase. During the impact phase, the velocities of two liners rise in turns with kinetic energy exchange. In the propulsion phase, the axial impact becomes insignificant, but the radial interaction between two liners influences the appearance of tandem EFPs. Meanwhile, it should be mentioned that the inner surface of foregoing EFP remains to be in contact with the outer surface of following EFP in the propulsion phase, and the following one would continue to push the foregoing one for about 10μ to 20 μs, causing the velocities of following and foregoing EFPs gradually decreasing and increasing respectively. In the slide phase, an obvious relative movement occurs between the two EFPs, and there would be barely kinetic energy exchange. Then, the two EFPs separate gradually and get into the phase of free flight. Generally, if the outer and inner liners have the same thickness, the outer copper-inner copper liners form two long EFPs, the outer copper-inner steel liners become a foregoing short steel EFP and a following long copper EFP, and the outer steel-inner copper liners produce a foregoing long copper EFP and a following conical steel EFP. In addition, thickness match also has an important impact on formation appearance and separation process for both outer copper-inner copper liners and outer steel-inner copper liners. With the thickness ratio of outer liner to inner liner decreasing, the length and length-diameter ratio of both foregoing and following EFPs increase gradually.