Ablation characteristics of insulator under high-temperature gas dual-pulse erosion

This study numerically simulated and investigated the flow field characteristics of a typical dual-pulse solid rocket motor with a soft pulse separation device through thermal insulation ablation under high-temperature dual-pulse erosion. The ablation rate of ethylene -propylene-diene monomer (EPDM) insulator was measured after the experiment. Experimental results were analyzed through scanning electron microscopy and microcomputed tomography. The ablation mechanism of the EPDM insulator under the operation conditions of a dual-pulse solid rocket motor was evaluated by analyzing the results. The results reveal that the internal flow field of the motor with a soft pulse separation device is uniform. The original charred layer existing on the EPDM insulator surface in the first pulse combustor is the decisive factor affecting the final ablation rate of the dual-pulse motor during the second pulse operation, and the ablation characteristic region is easily formed with the exfoliation of the charred layer. The ablation rate difference of the insulator increases with gas velocity.     

Reaction characteristic of PTFE/Al/Cu/Pb composites and application in shaped charge liner

In this paper, the reaction characteristic and its application in shaped charge warhead of a novel reactive material, which introduced copper (Cu) and plumbum (Pb) into traditional polytetrafluoroethylene/aluminum (PTFE/Al), are studied. The thermal analysis and chemical reaction behavior of the PTFE/Al/Cu/Pb mixture are investigated by Differential Scanning Calorimetry (DSC),Thermo-gravimetry (TG), and X-ray Diffraction (XRD) techniques. Then, the shaped charge liners with PTFE/Al/Cu/Pb reactive materials are fabricated, and the X-ray experiments show that they could form reactive jets with excellent performance under the detonation effects of the shaped charge. Based on that, the penetration experiments of shaped charge with PTFE/Al/Cu/Pb reactive liner against steel plates are carried out, and the results demonstrate that the PTFE/Al/Cu/Pb reactive jets could produce a deeper penetration depth compared to the traditional PTFE/Al reactive jets. Meanwhile, the PTFE/Al/Cu/Pb reactive jets also show significant inner-blast effects, leading to dramatically cracking or fragmentation behavior of the penetrated steel plates. This new PTFE/Al/Cu/Pb reactive liner shaped charge presents enhanced penetration behavior for steel targets that incorporates the penetration capability of a high-density and ductility jet, and the chemical energy release of PTFE-matrix reactive materials.     

火箭尾气扰动电离层及其应用研究

大型火箭二次点火时,排放出的尾气中含有大量的化学物质(主要成分是CO2和H2O),可以显著改变电离层密度,进而影响电波的传播,因此具有现实的应用价值.讨论了火箭尾气在电离层高度的扩散过程和相应的离子化学过程,理论计算了火箭尾气排放后电离层电子密度的响应过程.结果表明,火箭所排放的尾气能够使得电离层F区的电子密度显著减少,进而形成"电子空洞".最后在此现象的启发下,简单论述了空间人工释放化学物质扰动电离层技术在军事方面的应用前景.     

双层反应装甲干扰射流影响因素分析

通过对双层反应装甲与射流作用过程进行分析和数值模拟,得到双层反应装甲飞板飞散及与射流作用物理过程,通过模拟结果与物理实验比较可知,数值模拟过程基本正确.同时,利用ANSYS-DYNA针对双层反应装甲不同结构参数与射流作用过程进行数值模拟,分析双层反应装甲两组件距离、与主靶板距离及两组件的夹角对干扰射流的影响,从而为双层反应装甲结构改进及设计优化提供理论参考.     

某型底排-火箭串联式复合增程弹发动机最佳点火时间研究

针对底排-火箭串联式复合增程弹火箭发动机点火时间进行外弹道优化研究,分析底排装置对火箭发动机工作特性的影响,研究火箭发动机不同点火时间对全弹射程的影响,确定火箭发动机的最佳点火时间.     

火箭自导深弹空中段关键指标研究

文中依据火箭自导深弹的组成及攻潜过程,建立了相关仿真模型,在典型条件下,分别采用对目标当前点和对目标提前点两种射击策略,利用蒙特卡罗法仿真分析了弹箭分离高度、入水速度、溅落点散布误差和助飞段平均飞行速度等空中段主要指标对发现概率的影响。仿真结果表明：溅落点散布误差和助飞段平均飞行速度对发现概率影响显著,为火箭自导深弹空中段关键指标;溅落点散布误差控制在200m以内,助飞段平均飞行速度高于250m/s时,具有较高的发现概率。     

基于参数化建模的车轮形药柱形状优化

固体火箭发动机装药设计过程中,较高的装填分数往往导致药柱的应力应变较大,结构完整性不易满足要求,为了解决这一问题,将参数化建模方法与遗传算法相结合,对车轮形药柱进行形状优化.采用MSC.Patran软件的二次开发工具PCL (Patran Command Language)建立车轮形药柱的参数化有限元分析模型,能够根据...     

LRE试车数据挖掘中基于最大散度差的模糊聚类分析方法

在对液体火箭发动机试车数据进行聚类分析时,为解决故障数据样本与正常样本类间差异不大的问题,引入最大散度差准则,提出基于最大散度差的聚类算法MSD-CA.该算法以散度度量样本间的相似性,使样本的类内散度最小化和类间散度最大化同时进行.在此基础上,应用模糊理论对最大散度差准则进行模糊化,提出基于最大散度差的模糊聚类算法MS...     

新型远程火箭炮战斗损伤的仿真

为满足新型远程火箭炮战时技术保障仿真研究和战损规律研究需要,分析了该型火箭炮可能受到的威胁,建立了弹药破片场模型和该型火箭炮的几何描述模型,对该型火箭炮的战斗损伤进行了仿真,通过仿真可以得出某该型火箭炮的具体损伤程度及损伤概率.     

基于云分类器的液体火箭发动机故障诊断方法

本文首先将液体火箭发动机故障诊断问题转化为故障特征的模式分类问题,然后针对当前模式分类方法难以处理不确定性信息、属性特征空间的划分过硬等缺陷,结合云模型和云变换研究,提出了一种基于云分类器的液体火箭发动机起动过程故障诊断方法。历次试车数据的验证结果表明,该方法能够及时准确识别发动机起动工作过程中的故障模式。