An efficient and modular modeling for launch dynamics of tubed rockets on a moving launcher

This paper develops a modular modeling and efficient formulation of launch dynamics with marching fire (LDMF) using a mixed formulation of the transfer matrix method for multibody systems (MSTMM) and Newton-Euler formulation. Taking a ground-borne multiple launch rocket systems (MLRS), the focus is on the launching subsystem comprising the rocket, flexible tube, and tube tail. The launching subsystem is treated as a coupled rigid-flexible multibody system, where the rocket and tube tail are treated as rigid bodies while the flexible tube as a beam with large motion. Firstly, the tube and tube tail can be elegantly handled by the MSTMM, a computationally efficient order-N formulation. Then, the equation of motion of the in-bore rocket with relative kinematics w.r.t. the tube using the Newton-Euler method is derived. Finally, the rocket, tube, and tube tail dynamics are coupled, yielding the equation of motion of the launching subsystem that can be regarded as a building block and further integrated with other subsystems. The deduced dynamics equation of the launching subsystem is not limited to ground-borne MLRS but also fits for tanks, self-propelled artilleries, and other air-borne and naval-borne weapons undergoing large motion. Numerical simulation results of LDMF are given and partially verified by the experiment.     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

武装直升机火箭武器对地攻击方式效能评估

根据某型武装直升机机载火箭武器的四种对地攻击方式,建立了该型直升机实战中将遭遇的作战条件的战场模型。采用层次分析法,建立了确定各作战条件模块加权系数的判断矩阵并计算了加权系数;结合各种对地攻击方式和该型直升机火箭武器系统的特点,确定了各攻击方式下各模块的效能系数。在加权系数和效能系数的基础上,计算了各作战条件下四种对地攻击方式各自的作战效能,得出一个当前作战条件下的最佳攻击方式提供给飞行员。为飞行员实施对地攻击提供了科学依据     

三组元液体火箭发动机实现单级入轨的优化分析

建立了三组元液体火箭发动机性能计算模型、单级入轨可重复使用运载器质量模型和弹道模型,以起飞质量为目标函数,优化得到了实现单级入轨的发动机基本参数。结果显示:三组元发动机性能比氢氧发动机高10%。本研究是三组元发动机系统设计和分析的基础。     

火箭发动机控制活门动态特性模拟与测试

根据电动活门的工作原理和采样定律，通过活门等效器ＤＸＱ－１的设计，介绍了火箭发动机控制活门动态特性模拟与测试，分析了电路参数选取和设计的基本依据，并给出了有关的理论分析结果。     

液体火箭发动机故障诊断的命题逻辑方法

为对液体火箭发动机诊断知识的表达和组织提供一种简洁有效和易于处理的方式 ,通过以命题逻辑公式和子句的形式对系统观测信息和定性特征加以描述建立定性诊断模型 ,同时诊断问题基于归结原理和假言推理规则的演绎推理方法求解。基于试车数据的诊断结果表明方法具有较强的诊断能力。     

伞盘结构对大长径比发动机药柱结构完整性的影响

为了提高大长径比发动机药柱结构完整性水平,基于三维黏弹性有限元法,计算某大长径比固体发动机在温度和内压荷载联合作用下的结构响应;研究伞盘结构及其位置对药柱最大Von Mises应变的影响规律;讨论当伞盘位于药柱中部时,伞盘最大Von Mises应变随伞盘宽度、深度以及顶部圆弧半径比的变化规律。结果表明,伞盘位于药柱中部时可以有效地降低大长径比药柱的最大Von Mises应变,增加伞盘宽度、深度或选取合适的半径比均可降低伞盘结构的最大Von Mises应变。所得结论可为固体发动机设计提供参考。     

多次点火固体火箭发动机在面空导弹上的应用研究

论述了多次点火固体火箭发动机的多次点火的最佳控制,具体研究了两次点火固体火箭发动机的参数对飞行性能的影响,对两次点火固体火箭发动机结合弹道同时最佳化问题给出了仿真结果.     

鱼雷雷体特性对其惯性深控系统阶跃响应的影响

分析、对比了两种鱼雷雷体特性对惯性深控系统阶跃响应的影响 ,从中找出对鱼雷定深航行稳定性有较大影响的雷体参数 ,可以为鱼雷总体优化设计提供一定的参考     

基于系统构型替换的固冲发动机故障模式半实物仿真

为全面快速验证冲压发动机的故障检测算法,基于构型替换建立了能模拟多种固冲发动机故障的仿真验证平台。基于此平台,搭建了发动机点火故障模型、压强传感器故障模型、设备接口模型,以及与真实控制器中检测算法具有相同外部接口和系统构型的故障检测算法模型等。通过系统构型的切换,将同一个故障模式注入故障检测算法模型和真实发动机系统,并通过对比同一组故障模式下故障检测模型检测结果与发动机控制系统检测结果,来对发动机控制器中的故障检测算法进行快速验证。以无喷管助推器点火的检测为例,讲述了该方法的建模、实验验证及分析过程,此外,该方法还能应用到无喷管助推器关机、进气道前后堵盖打开、燃气发生器点火、燃气流量容错控制等多个故障模式的仿真模拟与验证,具有很强的通用性,能大大地降低控制系统开发与验证的时间成本,具有很强的应用价值。