舰船舵减横摇广义预测约束控制

依据舵减摇状态空间模型,推导舵减横摇广义预测控制律,在舵角舵速约束的条件下,采用二次型规划计算控制量进行减横摇控制.对某一船舶在典型航行工况下进行了系统仿真,仿真结果表明,该方法不但可取得35%～45%的减摇效果,而且对横摇角速度与横摇角加速度也有40%左右的减小效果.     

一维弹道修正弹阻力环修正控制算法研究

根据一维弹道修正弹阻力环修正技术的特点,建立了一维弹道修正弹的弹道模型.在此基础上分析了利用阻力环进行一维弹道修正的能力以及阻力环张开时刻与射程修正量之间的关系.提出了阻力环张开时刻的算法.仿真结果表明,该算法具有较强的修正能力,选择合适的阻力环张开时刻,可以使弹丸的落点偏差大大减小.     

基于遭遇角决策的并行双模切换舵减摇控制

结合舵减摇控制中通用线性模型与模糊线性模型的优缺点,采用了一种根据遭遇角的不同自动切换控制器设计模型的并行双模切换舵减摇控制方案。为在线自动辨识遭遇角,提出基于横摇功率谱密度柱状图的神经网络辨识方法。仿真结果表明,该方法辨识精度较高,且比传统重心法节省了在线计算量与存储数据库所需的存储空间,简化了辨识流程。     

宽速域飞翼布局后缘射流滚转控制研究

采用数值模拟方法对宽速域(Ma为0.145～0.7)内飞翼布局采用后缘环量控制射流进行滚转控制开展系统研究,并与传统舵面控制构型进行对比。研究关注电磁隐身特性、滚转控制特性和相关流动机理,以及射流引气的综合影响。结果表明：随马赫数的增大,射流对边界层流动的夹带和阻滞效应减弱,滚转控制能力显著下降;但射流控制大幅提高了典型角域的电磁隐身特性,并且引气量少,推力损失小,控制效率因子(单位附加阻力系数产生的控制力矩系数)高。综合来看,后缘环量控制射流是一种极具潜力的飞翼布局滚转控制设备。     

冲击动力学分析中密集模态问题的研究

理论解释了密集模态对响应的放大效应,提出了一种处理密集模态的方法:考虑阻尼效应,假定冲击设计输入加速度发生在冲击开始后的1/4周期,得到密集模态响应的实际时间历程,将密集模态实际时间历程响应叠加后以一阶模态响应形式与非密集模态响应进行NRL合成,最终得到总响应.用一个工程实例验证了提出的理论和方法,结果表明:密集模态对...     

两种薄壁壳体阻尼器阻尼性能研究

设计了金属橡胶和某型普通橡胶2种薄壁壳体阻尼器,利用测试系统迟滞环的方法,识别它们的阻尼耗损因子,对比结果表明,金属橡胶薄壁壳体阻尼器具有更好的阻尼性能。     

叶片式MRF减振器阻尼力矩模型的建立

MRF阻尼器具有体积小、能耗低、阻尼力连续可调等优点,是一种对结构实施半主动控制的理想装置,将其用于履带式车辆悬挂系统,可以提高车辆的越野机动性能。介绍了一种以传统叶片式液压减振器为基础设计的叶片式MRF减振器。基于流体的平行板流动模型和MRF的Bingham模型,建立了叶片式MRF减振器的阻尼力矩计算模型。计算结果表明,不加磁场时,叶片式MRF减振器具有与传统叶片式液压减振器相近的阻尼特性,加磁场时,减振器可获得较大的阻尼可调倍数。     

Influence of active constrained layer damping on the coupled vibration response of functionally graded magneto-electro-elastic plates with skewed edges

This article makes the first attempt in assessing the influence of active constrained layer damping (ACLD) treatment towards precise control of frequency responses of functionally graded skew-magneto-electro-elastic (FGSMEE) plates by employing finite element methods. The materials are functionally graded across the thickness of the plate in terms of modest power-law distributions. The principal equations of motion of FGSMEE are derived via Hamilton’s principle and solved using condensation technique. The effect of ACLD patches are modelled by following the complex modulus approach (CMA). Additionally, distinctive emphasis is laid to evaluate the influence of geometrical skewness on the attenuation capabilities of the plate. The accuracy of the current analysis is corroborated with comparison of previous researches of similar kind. Additionally, a complete parametric study is directed to understand the combined impacts of various factors like coupling fields, patch location, fiber orientation of piezoelectric patch in association with skew angle and power-law index.     

Moving horizon based wavelet de-noising method of dual-observed geomagnetic signal for nonlinear high spin projectile roll positioning

Phase-frequency characteristics of approximate sinusoidal geomagnetic signals can be used for projectile roll positioning and other high-precision trajectory correction applications. The sinusoidal geomagnetic signal deforms in the exposed and magnetically contaminated environment. In order to preciously recognize the roll information and effectively separate the noise component from the original geomagnetic sequence, based on the error source analysis, we propose a moving horizon based wavelet de-noising method for the dual-observed geomagnetic signal filtering where the captured rough roll frequency value provides reasonable wavelet decomposition and reconstruction level selection basis for sampled sequence; a moving horizon window guarantees real-time performance and non-cumulative calculation amount. The complete geomagnetic data in full ballistic range and three intercepted paragraphs are used for performance assessment. The positioning performance of the moving horizon wavelet de-noising method is compared with the band-pass filter. The results show that both noise reduction techniques improve the positioning accuracy while the wavelet de-noising method is always better than the band-pass filter. These results suggest that the proposed moving horizon based wavelet de-noising method of the dual-observed geomagnetic signal is more applicable for various launch conditions with better positioning performance.     

考虑黏弹性材料随机性的被动约束层阻尼梁动力学分析

采用传递函数方法研究了阻尼层黏弹性材料随机性对被动约束层阻尼(PCLD)梁动力学特性的影响。由Hamilton原理建立了PCLD梁六阶运动微分方程,通过引入状态向量,建立了系统的状态空间方程,利用传递函数方法得到了梁的固有频率和损耗因子。以黏弹性材料分数导数模型中的参数作为基本的随机变量,并假设其服从正态分布,使用Monte Carlo直接抽样法考察了材料模型参数的随机性对结构固有频率和模态损耗因子的影响。计算结果表明黏弹性材料参数的随机性对梁动力学特性的变异系数影响较大,模态损耗因子的变异系数最大值是材料参数变异系数的4.5倍。