基于实际案例的导弹装备战斗损伤评估

指出了基于实际案例的通用导弹装备战斗损伤评估内容及特点,提出了战斗损伤评估的量化标准,定义了战损率的概念;采用向量夹角余弦方法综合出了导弹装备各级组件的战损率及车辆的战损量化值,并通过实例证明了该方法具有所需信息量小、主客观综合性强、评估方法易于仿真实现等优点.     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于退化速率跟踪粒子滤波的剩余使用寿命预测框架

毋庸置疑,剩余使用寿命预测对于设备的健康管理越来越重要。近年来粒子滤波方法被越来越多地应用到设备寿命预测技术当中,这是因为粒子滤波方法能更好的解决非线性非高斯系统滤波问题,而且能够获得不确定度信息。但该方法的预测性能却过度依赖于预测模型,并且对于模型参数的初始分布也比较敏感,这在一定程度上限制了粒子滤波预测方法的进一步发展。本文针对基本粒子滤波预测方法的不足,提出了一种基于退化速率跟踪粒子滤波的通用预测框架,以历史观测数据的退化速率统计规律作为指导来跟踪目标数据的退化速率,实现对粒子滤波预测方法的简化。并将该方法用于轴承和锂离子电池的剩余使用寿命预测,验证了方法的有效性。     

RELIABLE ENERGY SUPPLY AND NONPROLIFERATION

The phenomenon of global warming has led to a revival of the prospects for increased nuclear energy production worldwide, yet such increased production carries with it the increased risk of proliferation. To mitigate this risk, various multinational arrangements have been proposed to provide reliable supply of nuclear fuel while at the same time discouraging the construction of national plants for nuclear enrichment and reprocessing. This article provides a brief history of some of these proposals and concludes that the likelihood of success for such schemes as effective tools for nonproliferation is not high at this time. A proposal from the World Council on Renewable Energy to expand the understanding of supplier obligations under Article IV of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) to include the development of non-nuclear energy technologies for NPT parties in good standing is potentially a much better nonproliferation tool. Such an approach tracks the ideas contained in Title V of the Nuclear Non-Proliferation Act of 1978, which has recently received revived congressional interest.     

基于自适应阈值的FAST特征点提取算法

FAST特征提取算法阈值选取固定,因此不能满足不同图像的特征点抽取要求,并且提取的结果存在着多个特征点块的现象。针对这些缺陷,首先采用动态全局阈值对原始灰度图像进行初步提取得到候选特征点,然后采取动态局部阈值和非极大值抑制法进一步对候选特征点进行筛选,从而达到自适应选取阈值和抑制多个特征点块的目的。实验表明,改进后的算法稳定性高,对不同光照和对比度情况下有一定的适应能力,并且运算量相对比于其他一些特征提取算法要小得多,满足实时应用的要求。     

LDO稳压器敏感度建模与仿真技术研究

基于LDO稳压器在电磁干扰（EMI）下产生直流偏移失效的机理分析,展开敏感度建模与仿真方法研究。使用一款实验芯片,创新地引入片上电压传感器,用于测试EMI在LDO稳压器内部的传播特性。在敏感度建模中,建立等效电路模型,通过直流功能测试,Z参数阻抗特性测试验证模型的正确性,将该模型用于LDO稳压器的敏感度预测。在敏感度仿真过程中,通过分析关键子电路和不断增加寄生元件,仿真不同寄生因素对敏感度影响的权重。将仿真结果与传导直接注入法（DPI）片上测试结果对比,仿真结果与DPI测试在频域1MHz至1GHz匹配。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

相控阵雷达外场试验目标模拟技术

针对传统雷达回波模拟技术模拟目标态势单一、建设成本高、灵活性差等缺陷,结合相控阵雷达快速波束定向的扫描特点,提出了一种基于射频存储转发技术和移动阵列平台的相控阵雷达外场试验目标模拟方法。该方法采用射频空间辐射注入的方式为雷达提供较为逼真的三维空间模拟目标回波信号和构建较为复杂的模拟目标场景态势,能够支持包括雷达天线在内的整个雷达系统进行模拟试验或训练。最后通过实例仿真验证了该方法的有效性和可实现性。     

悬浮固相颗粒对储集层基质孔隙的堵塞规律研究

应用胜利油区8个不同区块的岩心及注入水,采用岩心流动实验手段,研究了注入水中悬浮颗粒对储层孔隙的堵塞特征,发现悬浮颗粒对储层的堵塞特征表现为孔隙逐步堵塞和迅速堵塞两种类型;悬浮颗粒浓度低且孔径与粒径的比值较大时易形成孔隙避步堵塞;悬浮颗粒浓度大或孔径与粒径的比值较小时易形成迅速堵塞;悬浮颗粒对储层的堵塞程度、堵塞类型是颗粒浓度、颗粒粒径与储层孔喉匹配综合作用的结果;迅速堵塞特征的初始堵塞效果主要取决于孔径与粒径的匹配关系,最终堵塞效果主要与注入水中的颗粒浓度有关;高浓度的小颗粒对孔隙基质的堵塞特征表现为迅速堵塞。