一种串行通信的误码率测试方法

针对目前导弹系统RS-422,RS-485等串行通信总线的误码率测试没有统一、科学、客观的测试方法与测试仪器,提出一种基于通信设备内部自身通信验证的误码率测试方法,该方法采用通讯设备的自闭环链路实现收发端口互相校验,以半双工的工作方式,在多通道串行通信模块的通道之间建立发送-接收链路,基于伪随机码m序列为测试码流,利用统计学中的置信度原理,在保证测试结果的可信度前提下,定量地评估通信系统的质量,具备充分理论依据的基础上实现了低成本高效率的误码率测试.     

基于因子分解和光束法平差从航空序列图像恢复三维结构

从航空序列图像恢复目标三维结构是航空摄影测量的基本问题。针对现有算法中精度与计算量的矛盾,提出一种基于因子分解与光束法平差的新算法。作为因子分解与光束法平差的桥梁,提出基于"R T"模式共线方程的概念,详细推导了其线性化公式。仿真实验和真实图像实验表明,新算法精度高、稳定性好,可应用于航空测绘、虚拟现实、军事侦察等工程实践。     

卫星通信抗干扰技术综述

卫星在现代战争中发挥着举足轻重的作用,提高卫星通信的抗干扰能力具有非常重要的意义.通过分析卫星通信系统面临的各种干扰类型,综述了现有卫星通信系统常用的抗干扰技术的原理、特点和国外的发展现状,包括天线抗干扰技术、扩频技术、星上处理技术等.讨论了卫星通信抗干扰技术研究的发展方向和今后值得进一步研究的问题.     

“又＋动1＋又＋动2”格式之考察

本文对收集到的＂又＋动1＋又＋动2＂格式的语料进行了定量、定性分析,从它的构成形式、语义特点、位序特点、语法功能四个方面概括了这一格式的特点,并比较分析了这一格式与＂又＋形1＋又＋形2＂格式的相同点和不同点,以及与其它并列格式的区别。以期对＂又A又B＂格式的特点有个更全面、准确地把握。     

非平稳高斯序列最大值的几乎处处中心极限定理

在较弱的条件下,研究了一类非平稳高斯序列的几乎处处中心极限定理.设{Xa,n≥1}为一非平稳高斯序列,记其协方差为rij=Cov(Xi,Xj).假设该序列满足如下条件:对充分大的n,若存在0<α<1当|i-j|>nα时,rijlog|j-i|(l0glog|j-i|)1+ε一致有界.在这一条件下,通过利用概率极限理论,...     

北斗三号新信号体制共视时间比对

为促使北斗系统特别是北斗三号系统尽早加入国际原子时计算,利用中国科学院国家授时中心以及捷克无线电工程和电子学院两个守时实验室接收机产生的北斗三号新信号体制观测数据,开展基于北斗三号新信号体制共视时间比对试验。结果表明,北斗三号信号的多路径噪声影响小于北斗二号信号,且信噪比优于北斗二号信号。对比已有的研究,北斗三号新信号体制(B1C和B2a)共视时间比对的噪声相对于北斗三号卫星播发的北斗二号兼容信号体制(B1I和B3I)有较大的改善,其结果与GPS、Galileo共视比对结果相当,且在零基线共钟比对中,基于北斗三号新信号体制比对钟差的标准偏差相对于北斗二号信号提高了40%以上;利用北斗三号新信号体制共视得到的亚欧两地钟差噪声小于北斗二号信号,且比对钟差的稳定度相对于北斗二号提高了10%以上。该试验也可为北斗三号时间比对纳入国际原子时计算提供相关的研究基础。     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

气象卫星的军事应用

为了研究全球气象卫星在军事领域的应用情况,通过对相关国家气象卫星的种类以及军事应用的特点、简要发展史、现状,以及在现代战争中的应用等情况进行了阐述,并重点介绍了气象卫星在伊拉克战争中的应用,结果表明气象卫星作为信息化军队的重要资源之一,对国防建设,尤其是对现代高技术条件下的局部战争具有深远的影响。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

中继卫星调度问题的CSP模型

中继卫星在地球同步静止轨道上运行,既能直视中、低轨道用户航天器,又能直视地面站,是沟通用户航天器与地面站的桥梁。中继卫星调度问题是一类非常重要的调度问题。基于约束满足理论,通过分析中继卫星调度问题的特点与约束条件,建立了中继卫星调度问题的CSP模型。利用卫星工具箱STK进行模拟仿真,对CSP模型进行了求解。结果表明,所建立的CSP模型是合理的。