基于Powell法的GNSS卫星轨道拟合算法

针对GNSS导航信号模拟源中卫星轨道计算的高精度实时性要求,提出了一种基于Powell最优化理论的卫星轨道拟合算法。该算法将有限点卫星位置拟合问题转化为无约束极小值问题,使用最优化理论求解卫星轨道模型参数,从而可以方便计算任意时刻的卫星速度、加速度等高阶量。算例结果表明计算卫星星历时,位置误差小于1×10-4m,速度误差小于1×10-6m/s,计算量为广播星历直接计算的1/3;计算精密星历时,位置精度在2cm左右,拟合精度较拉格朗日插值算法提高了大约1倍。通过实际应用,充分验证了算法的有效性。     

卫星导航接收机中积分清零器的性能分析

为了使跟踪环路得到最高的输入信噪比,卫星导航接收机在时延估计时应使用匹配滤波器。但出于节省硬件资源的考虑,卫星导航接收机通常采用积分清零器完成相关运算。然而积分清零器相对于匹配滤波器存在性能损耗,对此目前尚无量化的结论。本文推导出积分清零器性能损耗的解析表达式,并使用Monte Carlo仿真的方法验证结论的正确性。理论和仿真结果表明当采样率为2倍的前端带宽时,积分清零器相比匹配滤波存在约0.44dB的损耗,当采样率提高到4倍信号带宽时,积分清零器的性能损耗几乎可以忽略。该结论对卫星导航接收机的设计具有重要的意义。     

天基预警卫星弹道预报能力仿真分析

天基预警卫星对导弹位置和速度的预测误差是引导信息中的重要组成部分,直接影响到远程预警雷达和跟踪制导雷达的搜索性能.根据天基预警卫星视线角误差和导弹目标经验数据,设计导弹预报误差估计模型,计算预报误差带半径.仿真结果表明:通过对理想弹道目标进行观测误差协方差分析,可以获得预警卫星观测的水平及垂直平面预测误差带.     

混合总线网络化ATS硬件结构与组网方案设计

混合总线网络化ATS可整合多种总线测试仪器/设备功能,发挥不同总线测试平台优势,增强系统灵活性,节约新系统的构建成本.针对靶场测试设备现状,研究了基于网络化测试技术的混合总线ATS构建方法.提出了混合总线网络化ATS硬件结构并设计了利用接口适配器和利用网关设备2种组网方案.     

大型舰船电力系统网络重构研究

大型舰船电力系统的出现使供电方式由原来的辐射状向环形发展,其网络重构是一个崭新的问题.文中给出了大型舰船电力系统的网络拓扑结构并综合考虑了线路容量限制、节点电压约束及供电负荷优先性的重构数学模型,保证了各种情况下最大限度地给负荷供电.将规划遗传算法应用于所建模型的求解,并应用算例验证了此解法的可行性.     

卫星通信抗干扰技术综述

卫星在现代战争中发挥着举足轻重的作用,提高卫星通信的抗干扰能力具有非常重要的意义.通过分析卫星通信系统面临的各种干扰类型,综述了现有卫星通信系统常用的抗干扰技术的原理、特点和国外的发展现状,包括天线抗干扰技术、扩频技术、星上处理技术等.讨论了卫星通信抗干扰技术研究的发展方向和今后值得进一步研究的问题.     

北斗三号新信号体制共视时间比对

为促使北斗系统特别是北斗三号系统尽早加入国际原子时计算,利用中国科学院国家授时中心以及捷克无线电工程和电子学院两个守时实验室接收机产生的北斗三号新信号体制观测数据,开展基于北斗三号新信号体制共视时间比对试验。结果表明,北斗三号信号的多路径噪声影响小于北斗二号信号,且信噪比优于北斗二号信号。对比已有的研究,北斗三号新信号体制(B1C和B2a)共视时间比对的噪声相对于北斗三号卫星播发的北斗二号兼容信号体制(B1I和B3I)有较大的改善,其结果与GPS、Galileo共视比对结果相当,且在零基线共钟比对中,基于北斗三号新信号体制比对钟差的标准偏差相对于北斗二号信号提高了40%以上;利用北斗三号新信号体制共视得到的亚欧两地钟差噪声小于北斗二号信号,且比对钟差的稳定度相对于北斗二号提高了10%以上。该试验也可为北斗三号时间比对纳入国际原子时计算提供相关的研究基础。     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Automated integration of real-time and non-real-time defense systems

Various application domains require the integration of distributed real-time or near-real-time systems with non-real-time systems.Smart cities,smart homes,ambient intelligent systems,or network-centric defense systems are among these application domains.Data Distribution Service(DDS)is a communi-cation mechanism based on Data-Centric Publish-Subscribe(DCPS)model.It is used for distributed systems with real-time operational constraints.Java Message Service(JMS)is a messaging standard for enterprise systems using Service Oriented Architecture(SOA)for non-real-time operations.JMS allows Java programs to exchange messages in a loosely coupled fashion.JMS also supports sending and receiving messages using a messaging queue and a publish-subscribe interface.In this article,we pro-pose an architecture enabling the automated integration of distributed real-time and non-real-time systems.We test our proposed architecture using a distributed Command,Control,Communications,Computers,and Intelligence(C4I)system.The system has DDS-based real-time Combat Management System components deployed to naval warships,and SOA-based non-real-time Command and Control components used at headquarters.The proposed solution enables the exchange of data between these two systems efficiently.We compare the proposed solution with a similar study.Our solution is superior in terms of automation support,ease of implementation,scalability,and performance.     

气象卫星的军事应用

为了研究全球气象卫星在军事领域的应用情况,通过对相关国家气象卫星的种类以及军事应用的特点、简要发展史、现状,以及在现代战争中的应用等情况进行了阐述,并重点介绍了气象卫星在伊拉克战争中的应用,结果表明气象卫星作为信息化军队的重要资源之一,对国防建设,尤其是对现代高技术条件下的局部战争具有深远的影响。