用时序展开法求解瞬时无耗传输线方程

本文用时序展开法直接在时域中求解了任意终端和输入端时无耗时变传输线方程。给出了这个问题的一般解。此方法简单,结果的物理意义明确,对分析准行波系统的时域问题具有一定的参考价值。     

单层结构陶瓷天线罩材料的宽频透波性能设计

依据天线罩对宽频带透波性能的要求,采用传输线理论,建立了单层结构天线罩平板材料透波率的计算方法.对单层结构天线罩材料的介电性能参数进行了优化设计,确定了在2～18 GHz频带,0～40°入射角范围内满足透波率要求的最优介电性能参数.设计结果表明,当材料的介电常数ε≤3.0,损耗角正切tanδ≤0.02时,具有最佳厚度的...     

舰载武器系统零位检测与规正方法

零位检测与规正是作战系统装舰的基础工作,也是武器系统准确打击目标的前提和基础.鉴于传统瞄星方法和标定物标定方法的局限性,以在工程中遇到的特定环境下的武器系统标定为例,分析了具体环境下武器系统零位检测与规正的创新性运用,提出了"线标定法",以为类似情形下的武器系统或作战系统标定提供借鉴.     

机场道面抢修用聚氨酯稳定集料的试验研究

以机场道面意外损毁的抢修为目的,进行了聚氨酯发泡快速稳定道面基层回填料的试验研究。试验结果表明,常温下用聚氨酯发泡稳定碎石集料,2 h无侧限抗压强度达到2.05 MPa,对道面结构的有限元分析表明,试验所用材料可满足道面基层的力学性能要求。     

Modeling and analysis of a mixed‐model assembly line with stochastic operation times

We consider a mixed‐model assembly line (MMAL) comprised a set of workstations and a conveyor. The workstations are arranged in a serial configuration. The conveyor moves at a constant speed along the workstations. Initial units belonging to different models are successively fed onto the conveyor, and they are moved by the conveyor to pass through the workstations to gradually generate final products. All assembling tasks are manually performed with operation times to be stochastic. An important performance measure of MMALs is overload times that refer to uncompleted operations for operators within their work zones. This paper establishes a method to analyze the expected overload times for MMALs with stochastic operation times. The operation processes of operators form discrete time nonhomogeneous Markov processes with continuous state spaces. For a given daily production schedule, the expected overload times involve in analyzing the Markov processes for finite horizon. Based on some important properties of the performance measure, we propose an efficient approach for calculating the expected overload times. Numerical computations show that the results are very satisfactory. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

特大规模组合电路高速测试生成系统ATGTA-1

针对特大规模组合电路和全扫描设计电路提出了一种高速测试生成方法，并建成了相应的测试生成系统ＡＴＧＴＡ－１。该系统采用有限回溯测试模式产生方法生成测试码，采用ｎ（机器字长）个测试码并行的单故障传播方法模拟验证测试覆盖。测试生成与故障模拟为ｎ对１紧耦合集成方式。该系统运行１０个Ｂｅｎｃｈｍａｒｋ电路，取得了低测试长度、高故障覆盖、高效率的良好效果。     

求截交线与相贯线的新方法

类似性法、近似对抗性法是笔者归纳的求解截交线、相贯线的一种实用方法,使学生在求对截交线、相贯线之前即可判断答案图形及投影特点,并能验证结果的正确性,提高了学生解题的正确率.     

"黑箱”子网络单子网络故障的在线诊断

故障在线诊分析了测试点电压增量与故障子网络空间的关系,提出了将测试点电压增量投影到子网络空间定位故障子网络的方法.该方法仅需一次测试结果,且不依赖于子网络内的结构和参数,故可用于"黑箱”子网络的故障诊断.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。