二阶阶跃模型下导航信号畸变对接收机载噪比估计影响分析

载噪比作为评估导航信号质量的重要指标,直接影响着接收机的捕获、跟踪和电文解调性能。推导了基于国际民航组织二阶阶跃信号畸变模型下导航接收机采用相关、非相关处理时载噪比估计与畸变模型参数之间的解析表达式,并分析了畸变参数对导航接收机载噪比估计误差的影响。理论分析及仿真结果表明:数字畸变参数变化范围下导航信号载噪比变化在10-2量级,增大模拟畸变的振荡频率或者减小衰减频率将会提高载噪比估计值,模拟畸变参数变化引起的载噪比损耗可达0.1d BHz,畸变参数对载噪比估计的影响整体上都较小,因此导航接收机的载噪比输出不能作为监测导航信号是否异常的完备检测量。     

并行程序中同步瓶颈的检测和优化方法

针对并发程序中锁的不当使用可能导致性能瓶颈的问题,提出检测和优化并发程序中同步瓶颈的方法IdeSync。IdeSync使用静态分析方法获取同步方法和同步块,构建静态同步依赖图,采用基于执行路径的动态分析技术进行同步依赖关系分析,构建同步依赖图。为了暴露性能瓶颈,在同步依赖图上通过增加程序工作负载的方式,监测临界区的性能变化,并针对检测到的同步瓶颈给出优化建议。在实验中通过HSQLDB、SPECjbb2005和RxJava等12个大型实际应用程序对IdeSync的有效性进行验证,共检测到72个同步瓶颈,根据优化建议进行优化后程序性能均有所提升。实验表明,IdeSync能够有效地检测和优化同步瓶颈。     

小子样条件下战斗部爆炸仿真数据可信性分析

高效毁伤战斗部试验次数受到严格控制,如何在小子样条件下分析仿真数据的可信性非常有必要。通过均匀试验得到了战斗部在地下目标腔室内部爆炸某点冲击波最大超压峰值,利用normplot及Lilliefors函数分析了仿真数据的分布特征,而后在已有检验方法的基础上,结合顺序统计量和均匀分布的特点提出了一种新的相容性验证思路。研究表明:该方法不受样本容量的限制,利用MATLAB程序编程可以快速判断仿真数据的可信性。     

冰河事故救援处置对策研究

针对目前冰河事故救援存在的问题,通过对冰河事故救援的危险性及难点作简要介绍,提出了针对性的处置程序和措施,并根据实际处置过程中出现的问题总结出注意事项。通过对冰河事故采取针对性的处置措施,可以提高冰河救援的成功率和安全性,为消防部队的实际救援工作提供参考。     

临近空间高超声速目标拦截弹弹道规划

利用弹道规划设计了针对临近空间高超声速飞行器的拦截弹道。分析了临近空间高超声速目标拦截问题,将其定性为临近空间的远程高超声速拦截,并提出弹道规划需求;设计了一种两级助推的拦截弹,建立了考虑地球曲率和自转的拦截弹质点平面运动模型;根据弹道规划需求设计弹道约束,以末速最大、与终点距离误差最小和全程热量最小为指标建立拦截弹弹道规划问题;采用粒子群算法求解弹道,结果表明:符合约束的规划弹道是高抛再入形式,与比例导引弹道和准最佳弹道相比,拦截弹大部分时间飞行在大气层外,有效降低了气动热效应影响和对弹体材料的性能需求,且为末制导段提供良好的初始工作环境。     

Optimal and asymptotically optimal policies for assemble‐to‐order n‐ and W‐systems

We consider two specially structured assemble‐to‐order (ATO) systems—the N‐ and W‐systems—under continuous review, stochastic demand, and nonidentical component replenishment leadtimes. Using a hybrid approach that combines sample‐path analysis, linear programming, and the tower property of conditional expectation, we characterize the optimal component replenishment policy and common‐component allocation rule, present comparative statics of the optimal policy parameters, and show that some commonly used heuristic policies can lead to significant optimality loss. The optimality results require certain symmetry in the cost parameters. In the absence of this symmetry, we show that, for systems with high demand volume, the asymptotically optimal policy has essentially the same structure; otherwise, the optimal policies have no clear structure. For these latter systems, we develop heuristic policies and show their effectiveness. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 62: 617–645, 2015     

Auctions in the post‐change‐order period

A change order is frequently initiated by either the supplier or the buyer, especially when the contract is long‐term or when the contractual design is complex. In response to a change order, the buyer can enter a bargaining process to negotiate a new price. If the bargaining fails, she pays a cancellation fee (or penalty) and opens an auction. We call this process the sequential bargaining‐auction (BA). At the time of bargaining, the buyer is uncertain as to whether the bargained price is set to her advantage; indeed, she might, or might not, obtain a better price in the new auction. To overcome these difficulties, we propose a new change‐order‐handling mechanism by which the buyer has an option to change the contractual supplier after bargaining ends with a bargained price. We call this the option mechanism. By this mechanism, the privilege of selling products or services is transferred to a new supplier if the buyer exercises the option. To exercise the option, the buyer pays a prespecified cash payment, which we call the switch price, to the original supplier. If the option is not exercised, the bargained price remains in effect. When a switch price is proposed by the buyer, the supplier decides whether or not to accept it. If the supplier accepts it, the buyer opens an auction. The option is exercised when there is a winner in the auction. This article shows how, under the option mechanism, the optimal switch price and the optimal reserve price are determined. Compared to the sequential BA, both the buyer and the supplier benefit. Additionally, the option mechanism coordinates the supply chain consisting of the two parties. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 248–265, 2015     

特种防护舱抗爆性能试验研究

为探讨特种防护舱抗爆性能,进行了舱内爆炸原型试验,研究不同装药量下开闭盖状态防护舱内爆炸时的空气冲击波超压和舱体位移过程。结果表明:同药量下闭盖状态的空气冲击波超压明显高于开盖状态,即封闭舱内偶然爆炸时空气冲击波超压更高;随装药量的增大,舱壁的空气冲击波超压也在增大;舱体侧壁经过多次正反射作用均未发生碎片反应,顶盖泄爆措施对降低底板的空气冲击波超压十分有利;距爆心较近处的位移均比距爆心较远处的位移大。原型试验舱体完全破坏,但结构未发生崩溃式破坏,并无碎片及内爆的二次破片飞出,舱体具有一定的抗爆性能和较好的防破片能力。     

滤波器阶数对导航接收机时域抗干扰的影响分析

滤波器阶数是影响卫星导航接收机时域自适应抗干扰性能和计算复杂度的核心参数。为了解决当前阶数选取严重依赖工程经验而影响分析不足的问题,分析了滤波器阶数对导航接收机时域自适应抗干扰性能的影响,可为导航接收机低复杂度时域抗干扰的研究提供理论支撑。该分析面向不同干扰环境,分别以滤波器幅频响应和信号载噪比为评估指标,并通过仿真实验和实测对传统最小均方算法和改进型最小均方算法进行验证,提出了一种基于数字滤波器设计的自适应最优滤波器阶数的设计方法。实验数据分析表明,通过适当提升滤波器长度,可以有效提升时域自适应滤波器的抗干扰性能;在实际应用中,可根据实际抗干扰需求,对滤波器阶数进行优化设计。     

基于WindowsCE的嵌入式漏磁检测仪ADC驱动程序设计

描述了基于WindowsCE的嵌入式漏磁检测仪总体结构设计,介绍了WindowsCE下设备驱动程序模型,并结合$3C2440A处理器的ADC驱动程序设计,详细阐述了基于Windows的流接口驱动程序的设计方法。实验结果表明：利用该方法设计的ADC驱动程序高效可靠,可以为开发类似设备驱动程序提供参考。