双时间隐式方法求解非定常绕流的相关问题

空间采用三阶精度的WeightedNND(WNND)格式,时间方向则采用具有二阶精度的双时间步隐式方法求解二维非定常Euler方程,数值模拟了NACA0012翼型俯仰强迫振动流场,讨论了内迭代步数、内迭代收敛判据以及物理时间步长对计算结果、计算效率与计算CPU时间的影响,并将计算结果与实验值进行了比较。     

振动矩形机翼非线性绕流数值研究

发展了可用于模拟包含运动边界的非定常流动的数值方法。该方法采用非结构动网格技术并构造了一种MUSCL类型有限体积格式,求解考虑了动网格效应的三维非定常Euler方程。非结构网格的变形运动由弹簧近似技术实现。用上述方法计算了作正弦振动的矩形机翼非线性绕流,计算结果与实验结果吻合,得到了流体运动与固体运动耦合的非线性流动特性。计算表明,该数值方法具有较好的精度和可靠性,完全可用于气动弹性或其他流固耦合问题的数值模拟。     

基于流场特性的管内检测机器人的外形优选研究

管道内检测机器人的结构形状是影响其运动学、动力学特性的关键因素,在机器人设计中占有重要地位。在合理提出一些基本假设后,用二阶迎风差分格式离散管道内检测机器人附近流场的控制方程,并用SIMPLE算法求解,得到了7种不同形状的管道内检测机器人所受的差压驱动力及其周围的流场信息,并对这几种结构的CFD特性作了比较。最后综合空化条件、驱动力、腔内有效体积和加工难度等因素,确定了上游半球形结构为设计形状。     

红河州边境地区治安问题探析

云南省红河州中越边境地区治安问题十分突出,直接影响着边境经济社会稳定。解决这一问题需要创新理念,建立高效规范的边境管理体系;加强警务合作,开展专项整治,保持高压态势打击边境地区各类违法犯罪活动;加强信息交流,发挥情报侦查在管控边境上的主导作用;加强边境联合执法,建立健全科学管控联动机制;加大经费投入,坚持科技强警思想,全面加强边防派出所执法队伍建设。     

作为历史观念的《尚书》“先王”观念

"先王"观念与"法先王"思想基本为同一范畴。"先王"观念与古代中国宗法社会紧密相连,还与中国古人对"政治制度和社会文化的延续性"的深刻认识有关。《尚书》中尚未出现"法先王"一词,但是"先王"观念非常浓厚,是中国"法先王"思想的文献源头。"先王"观念也是历史观念的重要体现,它与"殷鉴"思想、"忧患"意识一起构成了《尚书》历史功用思想的整体,并对后世产生了很大影响。     

临近空间对地观测平台的矢量化建模及稳定性分析

研究了临近空间对地观测平台的矢量化建模和稳定性问题.定义了描述观测平台空间运动的坐标系及运动参数;在受力分析的基础上,根据Newton-Euler方程建立了矢量形式的六自由度非线性数学模型;基于此模型,应用Lyapunov稳定性理论对观测平台的稳定性进行了分析.研究结果表明:对于给定的未扰运动,观测平台是渐近稳定的;纵...     

A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

An improved adaptive differential evolution algorithm for single unmanned aerial vehicle multitasking

Single unmanned aerial vehicle (UAV) multitasking plays an important role in multiple UAVs cooperative control, which is as well as the most complicated and hardest part. This paper establishes a three-dimensional topographical map, and an improved adaptive differential evolution (IADE) algorithm is proposed for single UAV multitasking. As an optimized problem, the efficiency of using standard differential evolution to obtain the global optimal solution is very low to avoid this problem. Therefore, the algorithm adopts the mutation factor and crossover factor into dynamic adaptive functions, which makes the crossover factor and variation factor can be adjusted with the number of population iteration and individual fitness value, letting the algorithm exploration and development more reasonable. The experimental results implicate that the IADE algorithm has better performance, higher convergence and efficiency to solve the multitasking problem compared with other algorithms.     

非自伴情形下时滞抛物方程的惯性流形

利用Lyapunov-Perron方法在适当的谱间隙条件和适当小的时滞假设下,证明了一类非自伴算子情形下半线性时滞抛物方程惯性流形的存在性。     

Approximation algorithms for minimizing total weighted completion time of orders on identical machines in parallel

We consider the problem of scheduling orders on identical machines in parallel. Each order consists of one or more individual jobs. A job that belongs to an order can be processed by any one of the machines. Multiple machines can process the jobs of an order concurrently. No setup is required if a machine switches over from one job to another. Each order is released at time zero and has a positive weight. Preemptions are not allowed. The completion time of an order is the time at which all jobs of that order have been completed. The objective is to minimize the total weighted completion time of the orders. The problem is NP‐hard for any fixed number (≥2) of machines. Because of this, we focus our attention on two classes of heuristics, which we refer to as sequential two‐phase heuristics and dynamic two‐phase heuristics. We perform a worst case analysis as well as an empirical analysis of nine heuristics. Our analyses enable us to rank these heuristics according to their effectiveness, taking solution quality as well as running time into account. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006