应用锤击法的大型复合材料桁架结构段自由振动分析

复合材料桁架结构以其轻质和优异的力学性能应用于大型航天航空飞行器结构,其承载能力和振动特性是决定其应用效果的关键因素。本文考察了大型碳纤维/环氧复合材料方形截面桁架结构段的自由振动特性。采用锤击法实验测试得到了复合材料桁架结构段自由振动的模态和频率,并与有限元数值模拟结果进行对比分析,论证了锤击法测试振动特性在复合材料桁架结构上应用的可行性和准确性。     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。     

Novel approach for active vibration control of a flexible missile

This paper investigates the feasibility of using an active dynamic vibration absorber (ADVA) for active vibration control of a flexible missile system through simulation. Based on the principles of a dynamic vibration absorber (DVA), a ring-type ADVA is first designed to attenuate the elastic vibration of the flexible missile, and the design of the active controller adopts the proportional-integral-derivative (PID) control algorithm. The motion equations of a flexible missile with an ADVA, which is subjected to follower thrust at its aft end, are derived using the Lagrangian approach. Taking the minimum of the root mean square (RMS) of the lateral displacement response of the center of mass as the objective function, a genetic algorithm (GA) is used to optimize the parameter of the DVA and PID controller. The numerical calculations show that the ADVA and DVA are effective in suppressing the vibration and provide approximately 41.2% and 17.6% improvement, respectively, compared with the case of no DVA. The ADVA has better performance than the DVA. When the missile is subjected to follower thrust, the effect of vibration reduction is more effective than the case without follower thrust. It is feasible to reduce vibration and improve the stability of flexible missiles by means of the ADVA.     

自适应控制中的Hartley块算法及实验

针对小波包自适应控制子频带内包含大量卷积和相关运算导致算法收敛速度慢的问题,提出基于Hartley块的小波包滤波最小均方算法。将快速Hartley变换引入块算法,实现频域内快速卷积和相关运算;在子频带内应用Hartley块算法生成控制信号,通过重叠保留法提出基于Hartley块的小波包滤波最小均方算法;通过仿真和实验研究了定频和扫频两种工况下的隔振性能和控制效果。结果表明,基于Hartley块的小波包滤波最小均方算法不仅可以大幅缩短收敛时间,还能显著提高控制精度,且鲁棒性和稳定性良好,能够很好地应用在工程实际中。     

风载荷对某发射装置待发射状态的影响

应用冯.卡门功率谱和谐波合成法生成了考虑脉动效应的瞬时风速时程曲线;计算了发射筒各段的等效风压及等效力矩,给出了作用于发射筒迎风面的风压总值及等效力矩;最后将载荷作为输入条件,进行动力学分析,获得了风载荷作用下发射装置的动态响应。通过分析可知:由于发射装置具有刚度强、质量大的特点,风载荷作用下发射装置的速度、加速度响应均较低,因此,风载荷主要影响发射筒的倾斜程度。     

小水线面双体船横摇阻尼特性数值与试验研究

针对安装稳定鳍的小水线面双体船开展了零速静水自由横摇衰减数值与试验研究。通过不确定度分析验证数值计算方法的可靠性,进而对比船体的线性横摇阻尼和非线性横摇阻尼,并分析摩擦阻尼和稳定鳍对小水线面双体船横摇恢复力矩的影响规律。结果表明:由数值计算求得的自由横摇衰减曲线与试验结果吻合良好;在线性横摇运动假设下,线性横摇阻尼系数随着初始横倾角的增加而增大;将通过数值计算求得的非线性阻尼系数代入到非线性横摇运动方程中能准确地模拟船体的自由横摇衰减运动;摩擦阻尼和稳定鳍对小水线面双体船零速静水自由横摇时的横摇恢复力矩贡献很小。     

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm³. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.     

随机滤波模型在变速箱剩余寿命预测中的应用研究

摘要：基于变速箱加速寿命实验的振动信号,提取信号的多种特征参量．通过分析各特征参量的敏感性和稳定性,选择幅域裕度指标、峰值指标、波形指标和RMS（RootMeanSquare）作为特征参量,建立一种基于随机滤波的变速箱剩余寿命预测模型,给出剩余寿命后验概率密度的递推公式,设计了极大似然估计方法求解模型参数,并经实例验证模型的有效性和实用性．