航空自导深弹和磁探仪攻潜模型与仿真

针对反潜巡逻机使用磁探仪和自导深弹的攻潜效能研究,提出了一种基于蒙特卡洛法的计算模型。在建立攻潜坐标系的基础上,给出了连投深弹射击深度的定义;结合磁探仪定位原理,提出了基于峰值追踪的定位目标和连投攻击的方法,仿真结果表明该方法能够提高命中概率;给出了目标分布和连投深弹的散布模型,依据攻潜过程和命中判定条件,进行了攻潜效能的计算;仿真分析了影响攻潜效能的主要因素,并研究了投弹间隔的确定方法。     

战斗部虚拟试验贝叶斯线性校准预测方法

聚能装药战斗部射虚拟试验中,射流穿深对靶板材料模型参数较敏感。为建立较准确实用的射流穿深预测模型,提出一种贝叶斯线性校准方法,建立物理过程真实值、模型预测值和试验测量值间的统计关系,结合有限的试验数据,校准未知模型参数。实例分析表明,该方法可较好地解决包含各种不确定性的大型复杂计算模型的参数校准问题。     

层流介质中金属板腐蚀电位分布研究

为了研究流动介质中产生的静电场,结合电化学和流体力学相关知识建立层流介质中金属板模型,利用贝塞尔函数展开及其逆运算推导出在三层介质中基于点电荷模型的腐蚀电位解析表达式,同时计算出金属板产生的电场。运用推导出的解析表达式计算出在流动介质中任意场点处金属板随不同流速产生的腐蚀电位,并通过实验验证结果的正确性。结果表明,对层流条件下电化学反应产生的电流密度所建模型的结果与实验测量数据吻合度较高,同时电场分布也会随着流体流速及层流方向上长度的变化而发生变化。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

22 nm全耗尽型绝缘体上硅器件单粒子瞬态效应的敏感区域

基于3D-TCAD模拟,研究了22 nm全耗尽型绝缘体上硅(fully depleted silicon-on-insulator,FDSOI)器件单粒子瞬态(single-event transient,SET)效应的敏感性区域。对比了使用单管和使用反相器来研究器件SET敏感性区域的方法,从而分析实际电路中重离子轰击位置对22 nm FDSOI器件SET敏感性的影响,并从电荷收集机制的角度进行了解释。深入分析发现寄生双极放大效应对重粒子轰击位置敏感是造成器件不同区域SET敏感性不同的原因。而单管漏极接恒压源造成漏极敏感性增强是导致单管与反相器中器件SET敏感区域不同的原因。修正了FDSOI工艺下器件SET敏感性区域的研究方法,与单管相比,采用反相器进行仿真,结果更符合实际情况,这将为器件SET加固提供理论指导。     

火箭发动机装药温度测量

随着火箭弹射击距离的不断增长,其发动机装药温度测量精度对落点精度的影响日益突出.提出了测量火箭弹装药代用材料的方法来测量火箭弹装药温度,克服了火箭弹装药温度测量困难,提高了测量精度.介绍了装药温度特性曲线测量方法,通过试验选取代用材料,设计了火箭弹装药相似体及药温测量装置,并对结果进行了分析.     

舰空导弹引战配合可视化仿真分析方法

提出了一种更加直观的舰空导弹引战配合分析方法,充分利用飞行试验数据和弹道仿真数据,通过引战配合数学仿真计算和可视化仿真,复现了弹目交会时战斗部破片杀伤目标的过程,并在某型舰空导弹飞行试验引战配合分析中得到了应用.     

基于仿真的深弹拦截鱼雷作战效能评估分析方法

拦截概率是反映悬浮式深弹拦截鱼雷作战效能的一项关键指标。结合战场态势对拦截概率及其影响因素进行了分析,提出了深弹阵对预定拦截线有效覆盖的问题;分析并提出了有效投影区间的计算公式,建立了拦截概率的理论计算模型;提出了基于仿真的拦截概率点估计和区间估计方法。仿真表明,该方法可为深弹拦截鱼雷的指控自动化设计、训战计划制定及其效果分析提供参考。     

Bounding the optimal burn‐in time for a system with two types of failure

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining bounds to the optimal burn‐in time and optimal replacement policy maximizing the steady state availability of a repairable system. It is assumed that two types of system failures may occur: One is Type I failure (minor failure), which can be removed by a minimal repair, and the other is Type II failure (catastrophic failure), which can be removed only by a complete repair. Assuming that the underlying lifetime distribution of the system has a bathtub‐shaped failure rate function, upper and lower bounds for the optimal burn‐in time are provided. Furthermore, some other applications of optimal burn‐in are also considered. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Satellite constellation design for forest fire monitoring via a stochastic programing approach

There is significant value in the data collected by satellites during and after a natural disaster. The current operating paradigm in practice is for satellites to passively collect data when they happen to fly over a disaster location. Conversely, this article considers the alternative approach of actively maneuvering satellites to fly directly overhead of the disaster site on a routine basis. Toward this end, we seek to compute a satellite constellation design that minimizes the expected maneuver costs for monitoring an unknown forest fire. In this article, we present a 2‐stage stochastic programing model for this problem as well as a accelerated L‐shaped decomposition approach. A comparison between our approach and the current operating paradigm indicates that our solution provides longer duration data collections and a greater number of data collections. Analysis also shows that our proposed solution is robust over a wide array of scenarios.