穿甲子弹偏心入射陶瓷/钢复合靶板试验

设计并进行了7.62mm穿甲子弹侵彻陶瓷/低碳钢复合靶板的弹道试验,得到了极限速度及陶瓷锥底部半径等数据。分析了锥底半径与入射速度、面板及背板厚度的关系,着重分析了偏心入射时靶板的抗弹机理。结果表明:陶瓷锥可分为破碎区和粉碎区,粉碎区半径约为面板厚度与弹丸半径之和;当弹着点距离陶瓷面板边缘大于5mm时,靶板的抗弹性能变化不大,而弹着点位于距陶瓷面板边缘小于5mm的板边区时,抗弹性能明显降低,靶板的有效防护面积应扣除板边区。     

COM／DCOM技术分析及其应用

本文介绍了面向对象、软件复用、构件化开发的基本概念,分析了COM/DCOM技术及其特点,重点研究COM/DCOM在潜用指控系统软件中的应用。     

级联SINS/GPS系统的相关卡尔曼滤波

针对级联式 SINS/ GPS导航系统中组合滤波器的测量噪声与系统噪声的相关问题 ,提出了一种相关程度未知条件下的估计量最优融合算法 ,并由此得到了一个顾及噪声相关性的卡尔曼滤波新算法。通过对一套 SINS/ GPS数据的计算 ,证明了新算法是成功的     

抗红外/毫米波双模制导的烟幕剂研究

针对目前我军受到的红外 毫米波复合制导武器威胁及现有干扰措施的局限,提出将纳米复合材料G用做宽波段烟幕干扰剂,该材料具有较高电导率、磁导率,比重小,在空气中较为稳定。简述干扰材料G的制备方法,分析其材料特性,初步测试其对红外热成像仪和毫米波雷达的衰减效果。     

指挥所目标识别专家系统的实现

在分析国内外敌我识别技术的现状及发展趋势的基础上,针对我军的具体实际,利用专家系统技术,提出了基于多情报源信息融合技术的目标识别方法,并给出了基于客户/服务器模式的系统实现结构图。     

基于单片机的DC—DC升压电路设计与仿真

介绍了Boost电路升压原理,给出了Boost电路完整的设计方案,重点讨论了硬件电路的设计,对软件所要实现的功能进行了设定,并设计了软件的流程图。最后用Matlab／Simulink软件,对电路进行了仿真实验,实验结果证明,该电路简洁有效,设计结果达到了预定的要求。     

一种北斗／CDMA导航系统数据融合的联邦卡尔曼滤波算法

北斗卫星与CDMA无线网络定位相结合的组合导航系统可以广泛应用于军事和民用领域,而有效进行数据融合是提高北斗/CDMA组合导航系统定位精度的关键.针对北斗/CDMA组合导航系统的特点,提出了一种基于联邦卡尔曼滤波的北斗/CDMA导航数据融合算法.算法采用机动目标的"当前"统计模型,分别建立了北斗定位系统和CDMA定位系统的状态方程,通过对相应定位参数进行滤波处理,提高了北斗/CDMA导航系统的定位精度.     

基于EGK/EGD的VxWorks图形界面开发技术

为了解决嵌入式系统下图形界面开发困难的问题,讨论了在VxWorks下利用EGK/EGD进行窗口图形界面开发的方法.分析了其工作原理及开发流程,并给出了具体的应用实例.工程应用表明,EGK/EGD功能强大、使用方便,是一套理想的嵌入式人机界面解决方案.     

信息化条件装备战场维修资源保障问题研究

战场维修资源是实施战场抢修最重要的物质条件,借鉴美军装备"精确保障"理念思想,对信息化条件下装备战场维修资源保障问题进行了研究.通过分析信息、资源、效能三者关联关系和维修资源保障指挥管理过程,确定装备保障指挥管理系统功能模型.最后对支持战场维修资源保障系统的关键技术和相应建设对策展开探讨.     

Locational tying of complementary retail items

We study a selling practice that we refer to as locational tying (LT), which seems to be gaining wide popularity among retailers. Under this strategy, a retailer “locationally ties” two complementary items that we denote by “primary” and “secondary.” The retailer sells the primary item in an appropriate “department” of his or her store. To stimulate demand, the secondary item is offered in the primary item's department, where it is displayed in very close proximity to the primary item. We consider two variations of LT: In the multilocation tying strategy (LT‐M), the secondary item is offered in its appropriate department in addition to the primary item's department, whereas in the single‐location tying strategy (LT‐S), it is offered only in the primary item's location. We compare these LT strategies to the traditional independent components (IC) strategy, in which the two items are sold independently (each in its own department), but the pricing/inventory decisions can be centralized (IC‐C) or decentralized (IC‐D). Assuming ample inventory, we compare and provide a ranking of the optimal prices of the four strategies. The main insight from this comparison is that relative to IC‐D, LT decreases the price of the primary item and adjusts the price of the secondary item up or down depending on its popularity in the primary item's department. We also perform a comparative statics analysis on the effect of demand and cost parameters on the optimal prices of various strategies, and identify the conditions that favor one strategy over others in terms of profitability. Then we study inventory decisions in LT under exogenous pricing by developing a model that accounts for the effect of the primary item's stock‐outs on the secondary item's demand. We find that, relative to IC‐D, LT increases the inventory level of the primary item. We also link the profitability of different strategies to the trade‐off between the increase in demand volume of the secondary item as a result of LT and the potential increase in inventory costs due to decentralizing the inventory of the secondary item. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009