离子束抛光加工矩形离轴非球面镜

采用一种简单的方法使用线性三轴离子束系统实现了矩形离轴非球面镜的抛光加工.根据离子束材料去除机理,分析了去除函数的法向材料去除特性,并且以去除函数束径、峰值去除速率和体积去除速率为指标,评价了入射角的小扰动鲁棒性.利用相关的分析和实验结果,对矩形离轴镜的抛光加工进行了合理的简化,并在自行研制的离子束抛光机床上进行了修形...     

药皮焊条焊缝脱硫的研究

通过理论分析及实验,探讨了手工电弧焊焊条药皮中添加金属镁粉的脱硫效果。研究表明：金属镁粉对焊缝金属的脱硫是有较明显效果的。     

偏心加筋板大变形梁板单元

给出了偏心加筋板大变形分析的理论公式和相应的梁板单元模型 .在肋骨和板的运动方程中引用 Von Karman形变方程 ;按照 Mindlin板理论计及横向剪切变形的影响 ;对横向剪应变和薄膜应变重新插值修正克服 Mindlin型单元在薄板应用时的“锁定”行为 ,此模型可适合于薄板和厚板的非线性分析 .     

流体动压超光滑加工关键工艺参数优化

流体动压超光滑加工材料去除主要受工件表面流体动压和剪切分布的影响,根据材料去除的理论模型分析了影响材料去除的关键工艺参数。基于流体动力学仿真和具体实验对抛光轮浸没深度、抛光轮转速和抛光轮间隙对流体动压超光滑加工的材料去除速率的影响规律进行了研究。分析结果表明:抛光轮的浸没深度对材料去除速率影响不大;材料去除速率随着抛光轮转速的减小、抛光间隙的增大而减小;考虑实际使用条件,最优抛光轮转速为300 r/min、抛光间隙为25μm、抛光轮浸没深度为(2/3)R。同时对抛光头温度稳定性进行了具体实验测试,其在装置启动后4 h基本达到热平衡,通过试运行预热的方式可有效避免温升变化对抛光间隙的影响。     

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with gra-phene platelets are studied in this paper. The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak's foundation. Sinusoidal shear deformation theory is used to describe displacementfield. Four different distribution patterns are employed in our analysis. The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters. The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers, weight fraction and two parameters of Pasternak's foundation.     

On vibration analysis of functionally graded carbon nanotube reinforced magneto-electro-elastic plates with different electro-magnetic conditions using higher order finite element methods

This article deals with evaluating the frequency response of functionally graded carbon nanotube rein-forced magneto-electro-elastic (FG-CNTMEE) plates subjected to open and closed electro-magnetic cir-cuit conditions. In this regard finite element formulation has been derived. The plate kinematics adjudged via higher order shear deformation theory (HSDT) is considered for evaluation. The equations of motion are obtained with the help of Hamilton's principle and solved using condensation technique. It is found that the convergence and accuracy of the present FE formulation is very good to address the vibration problem of FG-CNTMEE plate. For the first time, frequency response analysis of FG-CNTMEE plates considering the effect of various circuit conditions associated with parameters such as CNT dis-tributions, volume fraction, skew angle, aspect ratio, length-to-thickness ratio and coupling fields has been carried out. The results of this article can serve as benchmark for future development and analysis of smart structures.     

Effect of wire tension on different output responses during wire electric discharge machining on AISI 304 stainless steel

WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.     

油水两相分层流层流流速分布计算分析

利用剪切力比模型,进一步讨论了油水两相分层流层流流动的速度分布规律,将水相流速假设为抛物线形式分布与实验结果有较大偏差,将水相分为拖曳和返流两段更接近实际情况,模型所得水相计算结果更接近实验数据。指出剪切力比模型能否适合于油水两相分层流动计算理论需要更多实验结果验证。     

消解与重构——论新闻专业学生基础写作能力的培养

基础写作能力在新闻专业大学生的专业能力中占有极为重要的地位。针对目前学生写作能力各层面上所存在的问题,本文进行了相关分析,同时笔者试从”消解”和”重构”两个角度,对基础写作能力培养的实现进行梳理,最终得到基础写作能力培养的完整模式,以便更好地指导基础写作教学工作。     

真实感地貌生成算法的研究与实现

介绍一个可生成有真实感三维地貌图的生成算法。该算法通过采用线性插值方法计算地貌各点的高度,引入一适当的观察模型进行视见变换,并采用改进了的浮动水平线算法,依据地形数据信息生成逼真的三维地貌,并用C语言在微机上实现。