检查搜索时舰艇编队匀速搜潜与跳跃式搜潜比较

在分析水面舰艇编队使用拖曳式线列阵声纳匀速搜潜和“跳跃式”搜潜过程的基础上,对仿真环境进行假设,并建立了水面舰艇搜潜蒙特卡洛法模型,通过仿真试验,对其在一定条件下检查搜潜时匀速搜索与跳跃式搜索效能进行研究,得出的相关结论对提高水面舰艇反潜作战运用水平具有较大的实际应用价值.     

飞行器末制导雷达静态选择性试验及仿真分析

依据飞行器自控终点误差原理对特定的目标选择捕捉的影响进行了分析;建立了末制导雷达选择捕捉目标的静态试验布站方法;给出了末制导雷达检测目标回波粘连的处理和末制导雷达对选择录取目标数据的基准方向转换的方法;对火分基准方向对目标选择的影响进行仿真分析并得出相关结论,研究的成果对于飞行器选择攻击目标能力试验及评估的研究具有重要意义。     

水面舰艇编队反潜作战仿真模型组件化研究

针对目前编队反潜作战仿真领域中模型利用效率和可重用性较低的现状,提出并建立了基于组件技术的编队反潜仿真模型体系结构,依据编队反潜作战实际物理过程对编队反潜作战仿真模型体系进行了组件化层次结构划分和作战仿真模型组件设计,按照J2EE/EJB体系结构,完成了系统配置和不同类型组件及组件间信息交互接口设计,并对仿真系统进行了实现.结果证明该方法能有效提高模型可重用性并提高系统仿真运行效率.     

改进型JDL模型在武警部队院校信息化建设中的构建

在武警部队院校的网络信息化水平迅速发展的今天,由于各功能模块缺少统一的接口规范和能够协调各部门信息共享的机制,使得建成的各个功能模块之间无法共享信息,造成了数据库中信息的大量冗余和重复。结合数据融合技术的基本原理、发展现状和应用前景,对数据融合技术进行了介绍;针对武警院校信息融合的需求,提出了改进型JDL模型,分析了武警院校信息融合网络的服务架构层次,对信息融合网络中的核心问题信息共享、接口规范、数据融合进行了研究;利用模块化设计的思路,对原型系统进行了分析,对实验数据进行了重组,并提出了数据优化方案。     

基于NFxPEM算法的调制气流声源的非线性补偿

针对调制气流声源存在较强的谐波畸变,将声源系统等效为Hammerstein非线性模型,利用该模型下的预失真技术对声源进行非线性补偿研究。根据辨识的Hammerstein模型中静态非线性部分带有直流分量的特点,给出了考虑直流分量补偿的预失真算法,并用数值仿真验证了算法的准确性和直流分量补偿的必要性。在非线性补偿实验中,根据单频信号辨识得到Hammerstein模型参数,采用NFxPEM算法求得对应的预失真Wiener模型参数和预失真波形。实验结果表明, 与直接发射相比,补偿发射后声波的功率谱中谐波能量有所下降,而基频能量有小幅度的上升,说明了研究思路的正确性。     

基于方位特征序列的地雷鉴别算法

在使用低频超宽带合成孔径雷达(UWB-SAR)对地雷进行探测的过程中,根据目标电磁散射随方位角和入射角的变化特性,提出一种利用双峰间距和频率凹点特征沿方位向变化的隐马尔科夫模型(HMM)鉴别算法。该算法首先针对目标感兴趣区域(ROI)图像估计其各方位回波响应,然后利用时频原子提取时域双峰间距和频率凹点,进而得到随方位角变化的特征序列,再通过SAR工作时方位角和入射角的变化特点以及训练样本确定HMM参数,并在此基础上计算疑似目标新的特征矢量,采用马氏距离进行判别。实验结果表明了本文所提方法在目标鉴别方面的有效性。     

3D laser scanning strategy based on cascaded deep neural network

A 3D laser scanning strategy based on cascaded deep neural network is proposed for the scanning system converted from 2D Lidar with a pitching motion device. The strategy is aimed at moving target detection and monitoring. Combining the device characteristics, the strategy first proposes a cascaded deep neural network, which inputs 2D point cloud, color image and pitching angle. The outputs are target distance and speed classification. And the cross-entropy loss function of network is modified by using focal loss and uniform distribution to improve the recognition accuracy. Then a pitching range and speed model are proposed to determine pitching motion parameters. Finally, the adaptive scanning is realized by integral separate speed PID. The experimental results show that the accuracies of the improved network target detection box, distance and speed classification are 90.17%, 96.87% and 96.97%, respectively. The average speed error of the improved PID is 0.4239°/s, and the average strategy execution time is 0.1521 s. The range and speed model can effectively reduce the collection of useless information and the deformation of the target point cloud. Conclusively, the experimental of overall scanning strategy show that it can improve target point cloud integrity and density while ensuring the capture of target.     

Novel aluminum-based fuel: Facile preparation to improve thermal reactions

To improve the thermal properties of aluminum (Al) in the energetic system, a coated structure with ammonium perchlorate (AP) was prepared by a facile approach. And N, N-Dimethylformamide (DMF) was chosen as an ideal solvent based on heterogeneous nucleation theory and molecular dynamics simulation. This coated structure could enlarge the contact area and improve the reaction environment to enhance the thermal properties. The addition of AP could accelerate oxidation temperature of Al with around 17.5 °C. And the heat release of 85@15 composition rises to 26.13 kJ/g and the reaction degree is 97.6% with higher peak pressure (254.6 kPa) and rise rate (1.397 MPa/s). An ideal ratio with 15 wt% AP was probed primarily. The high energy laser-induced shockwave experiment was utilized to simulate the reaction behavior in hot field. And the larger activated mixture of coated powder could release more energy to promote the growth of shockwave with higher speed up to 518.7 ± 55.9 m/s. In conclusion, 85@15 composition is expected to be applied in energetic system as a novel metal fuel.     

物理化学实验教学改革的探索与实践

针对传统实验教学中存在的主要问题,对物理化学实验教学改革进行了一些有益的实践和探索,培养了学生的创新能力和综合素质,提高了教学质量。     

瞬态高强加热条件下含湿多孔介质传热传质模型研究

提出了瞬态高强加热下含湿多孔介质传热传质的新模型,模型包括的水分种类齐全、水分迁移机制全面,假设条件相对较少,考虑了非Fourier传热效应和非Fick传质效应。新模型通过具体的分区分析得到简化并更加实用。