无线冲击波超压测试系统研究

对比了6种不同弹种的国军标对冲击波测试的要求,总结了现有引线式和存储式冲击波测试方法的优缺点。重点介绍了一种小型无线冲击波测试系统,给出了系统的组成、工作原理及实验结果,实测数据表明该系统工作可靠、使用方便,符合国军标的相关要求。     

轴向应力波作用下的圆柱壳弹塑性后屈曲

为揭示柱壳屈曲变形的发展机理及屈曲波与弹塑性应力波耦合传播间的关系,运用非线性显示动力学有限元分析方法对承受轴向高速冲击载荷作用下柱壳的弹塑性后屈曲过程进行了研究。分析结果表明:对于柱壳在轴向高速冲击下的弹塑性轴对称动力屈曲,主要屈曲变形发生在柱壳的两端,屈曲变形的产生及发展与应力波在壳中的传播过程密切相关;塑性应力波在整个屈曲过程中起了绝对支配的作用;屈曲波的产生及发展,都与塑性波的传播及反射有关;弹性应力波由于在整个屈曲过程中持续的时间极短,处于次要的地位。     

有限水深Kelvin源格林函数及其导数的快速计算

应用线性船舶水动力学理论,将有限水深Kelvin移动兴波源格林函数分解成3部分:简单Rankine源集合、局部扰动项和波函数项。对各部分在亚临界和超临界航速时的快速计算分别作了讨论,其中对计算费时的局部扰动项采用了复数中的最陡下降积分法,加快了计算速度,进而引出各部分偏导数的计算。最后,比较了格林函数的差分值与偏导数值,计算了薄船兴波阻力与表面兴波,讨论了不同面元网格划分的收敛性,证实了亚临界、超临界航速兴波分别以横波、散波为主。     

Shock wave mitigation using zig-zag structures and cylindrical obstructions

The present study focuses on the mitigation of shock wave using novel geometric passages in the flow field. The strategy is to produce multiple shock reflections and diffractions in the passage with minimum flow obstruction, which in turn is expected to reduce the shock wave strength at the target location. In the present study the interaction of a plane shock front (generated from a shock tube) with various geometric designs such as, 1) zig-zag geometric passage, 2) staggered cylindrical obstructions and 3) zig-zag passage with cylindrical obstructions have been investigated using computational technique. It is seen from the numerical simulation that, among the various designs, the maximum shock attenuation is produced by the zig-zag passage with cylindrical obstructions which is then followed by zig-zag passage and staggered cylindrical obstructions. A comprehensive investigation on the shock wave reflection and diffraction phenomena happening in the proposed complex passages have also been carried out. In the new zig-zag design, the initial shock wave undergoes shock wave reflection and diffraction process which swaps alternatively as the shock front moves from one turn to the other turn. This cyclic shock reflection and diffraction process helps in diffusing the shock wave energy with practically no obstruction to the flow field. It is found that by combining the shock attenuation ability of zig-zag passage (using shock reflection and diffraction) with the shock attenuation ability of cylindrical blocks (by flow obstruction), a drastic attenuation in shock strength can be achieved with moderate level of flow blocking.     

3mm波段混凝土屏蔽材料的研究

在混凝土中添加标准砂,钢纤维,铁晶矿砂,炭纤维毡,氧化锌晶须,铁氧体,乙炔碳黑,羰基铁粉等材料,制成了具有微波吸收性能的混凝土屏蔽材料,以期能探索一条大型建筑及军事掩体的电磁防护的新途径。在3mm波段范围内对混凝土屏蔽材料进行了初步的实验研究,研究了不同材料、不同掺量下电磁波的吸收衰减特性,并分析了它们之间的关系,为进一步的研究指明了方向。     

爆电换能的理论分析

考虑了铁电介质的介电松弛和电导率松弛,计及冲击波阵面在样品中传播过程的影响,改进了垂直模式冲击波加载铁电陶瓷电响应的理论,且理论分析与实验结果基本一致。     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

地(舰)空导弹弹体结构可靠性分析

对地(舰)空导弹弹体结构可靠性进行了分析,介绍了弹体结构可靠性的工程计算方法,提出了改进弹体结构可靠性的技术途径。     

水面舰艇防御反舰导弹的技术途径

阐述了水面舰艇防御反舰导弹的各种技术途径.