基于单片机的DC—DC升压电路设计与仿真

介绍了Boost电路升压原理,给出了Boost电路完整的设计方案,重点讨论了硬件电路的设计,对软件所要实现的功能进行了设定,并设计了软件的流程图。最后用Matlab／Simulink软件,对电路进行了仿真实验,实验结果证明,该电路简洁有效,设计结果达到了预定的要求。     

SFPB处理的38CrSi钢表面纳米化层微观结构特征

采用超音速轰击技术（Supersonic Fine Particles Bombarding,SFPB）对调质态合金钢38CrSi进行表面纳米化处理,在材料表面制备了纳米结构表层;利用X射线衍射、扫描电镜和透射电镜等分析技术研究了表面纳米层的微观结构特征。结果表明：经SFPB处理后,材料表层发生了严重的塑性变形,表面形成了晶粒尺寸约为15nm的纳米结构层,微观应变约为0．19％;表面纳米层的厚度约为20μm（晶粒尺寸〈100nm）,纳米晶粒的尺寸随着距表面距离的增加而增大;在距表面40μm的范围内,高密度的位错墙和位错缠结将晶粒分为了尺寸为200～400nm的胞块结构,分析表明表面纳米化主要是位错运动的结果。     

一种北斗／CDMA导航系统数据融合的联邦卡尔曼滤波算法

北斗卫星与CDMA无线网络定位相结合的组合导航系统可以广泛应用于军事和民用领域,而有效进行数据融合是提高北斗/CDMA组合导航系统定位精度的关键.针对北斗/CDMA组合导航系统的特点,提出了一种基于联邦卡尔曼滤波的北斗/CDMA导航数据融合算法.算法采用机动目标的"当前"统计模型,分别建立了北斗定位系统和CDMA定位系统的状态方程,通过对相应定位参数进行滤波处理,提高了北斗/CDMA导航系统的定位精度.     

基于EGK/EGD的VxWorks图形界面开发技术

为了解决嵌入式系统下图形界面开发困难的问题,讨论了在VxWorks下利用EGK/EGD进行窗口图形界面开发的方法.分析了其工作原理及开发流程,并给出了具体的应用实例.工程应用表明,EGK/EGD功能强大、使用方便,是一套理想的嵌入式人机界面解决方案.     

信息化条件装备战场维修资源保障问题研究

战场维修资源是实施战场抢修最重要的物质条件,借鉴美军装备"精确保障"理念思想,对信息化条件下装备战场维修资源保障问题进行了研究.通过分析信息、资源、效能三者关联关系和维修资源保障指挥管理过程,确定装备保障指挥管理系统功能模型.最后对支持战场维修资源保障系统的关键技术和相应建设对策展开探讨.     

基于GMAW堆焊成形的顺序焊道搭接量模型

焊道搭接量对保证三维堆焊成形过程的顺利进行以及成形件的精度都有较为重要的影响。根据焊接熔滴过渡的物理特性,建立了GMAW堆焊三维成形的顺序焊道搭接量模型,在此基础上计算了平整堆焊层的相邻两道焊道的理论间隔,采用实际焊接试验对理论模型进行了验证,得到的理论间隔为L=2/3W,并进一步计算了平整堆焊层的高度为h=H/1-θ,实际试验得到的结果与理论结果相吻合,从而为焊接成形过程的自动化奠定了基础。     

Locational tying of complementary retail items

We study a selling practice that we refer to as locational tying (LT), which seems to be gaining wide popularity among retailers. Under this strategy, a retailer “locationally ties” two complementary items that we denote by “primary” and “secondary.” The retailer sells the primary item in an appropriate “department” of his or her store. To stimulate demand, the secondary item is offered in the primary item's department, where it is displayed in very close proximity to the primary item. We consider two variations of LT: In the multilocation tying strategy (LT‐M), the secondary item is offered in its appropriate department in addition to the primary item's department, whereas in the single‐location tying strategy (LT‐S), it is offered only in the primary item's location. We compare these LT strategies to the traditional independent components (IC) strategy, in which the two items are sold independently (each in its own department), but the pricing/inventory decisions can be centralized (IC‐C) or decentralized (IC‐D). Assuming ample inventory, we compare and provide a ranking of the optimal prices of the four strategies. The main insight from this comparison is that relative to IC‐D, LT decreases the price of the primary item and adjusts the price of the secondary item up or down depending on its popularity in the primary item's department. We also perform a comparative statics analysis on the effect of demand and cost parameters on the optimal prices of various strategies, and identify the conditions that favor one strategy over others in terms of profitability. Then we study inventory decisions in LT under exogenous pricing by developing a model that accounts for the effect of the primary item's stock‐outs on the secondary item's demand. We find that, relative to IC‐D, LT increases the inventory level of the primary item. We also link the profitability of different strategies to the trade‐off between the increase in demand volume of the secondary item as a result of LT and the potential increase in inventory costs due to decentralizing the inventory of the secondary item. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

On a Markov‐modulated shock and wear process

We present transient and asymptotic reliability indices for a single‐unit system that is subject to Markov‐modulated shocks and wear. The transient results are derived from the (transform) solution of an integro‐differential equation describing the joint distribution of the cumulative degradation process and the state of the modulating process. Additionally, we prove the asymptotic normality of a properly centered and time‐scaled version of the cumulative degradation at time t. This asymptotic result leads to a simple normal approximation for a properly centered and space‐scaled version of the systes lifetime distribution. Two numerical examples illustrate the quality of the normal approximation. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

196单片机在火控计算机中的应用

火控输出机是介于雷达和火炮之间的重要环节,在系统规定周期内,通过共享存贮器接收主机送来的位置和速度以及加速度数字量.完成数据插值、粗精分离.输出机在插值输出时与主机同步,并设计两种复位信号标志,手动复位和加电复位,使软件根据复位标志判断是否使火炮归零.火控输出机在火控系统中担当重要角色,它可根据火控主机解算后传输来的数据准确将火炮定位.     

气动力/推力矢量复合控制空空导弹最佳转弯规律

针对气动力/推力矢量复合控制空空导弹大离轴角发射的快速转弯问题,根据bang-bang控制理论,给出了导弹终端弹道角受限情况下,以最大末速为性能指标的最佳转弯规律.针对空空导弹纯气动力控制和复合控制两种情况,分别进行了初制导弹道的设计和仿真.结果显示,在中空低速发射时,采用后者转弯性能明显高于纯气动力控制导弹,而当初速高于1.2 Ma时,二者转弯性能非常接近.