改性C/C复合材料快速制备与抗烧蚀性能考核

采用液相浸渍法结合反应熔渗法快速制备改性C/C复合材料,研究其微观组织及在氧乙炔焰和高频等离子体风洞环境中的烧蚀行为。结果表明:改性C/C复合材料主要含有Hf C,Zr C,Ta C等高熔点陶瓷改性相,其密度为3.83 g/cm3,开孔率仅为4.71%。氧乙炔焰烧蚀360 s后,改性C/C复合材料表面形成一层主要由Hf O2,Zr O2,Ta2O5组成的致密氧化物层,材料的线烧蚀率为0.005 18 mm/s。使用高频等离子体风洞考核改性C/C复合材料球头模型,在热流量3.5 MW/m2、驻点温度2293℃的条件下考核180 s后,模型表面生成致密光滑的氧化物保护层,与基体结合牢固,模型形状及尺寸无明显改变,去掉氧化物后测得其线烧蚀率为0.001 72 mm/s。     

两道同侧扫掠激波作用下形成的三维平板边界层

为探索一种减弱扫掠激波/边界层干扰强度的侧压方式,采用数值计算方法研究两道同侧扫掠激波作用下形成的三维平板边界层。对三维边界层的流动机理进行研究,并与相同气流偏转角的一道扫掠激波作用下形成的三维边界层进行定量比较。研究表明,存在两道同侧扫掠激波时,第一道扫掠激波使侧壁附近边界层变薄,进而使第二道扫掠激波与再附形成的边界层的相互作用减弱,从而总的效果是两道扫掠激波与边界层的相互作用强度比一道扫掠激波的弱;两道扫掠激波的气流总偏转角与一道扫掠激波的相同,相交后汇聚成的激波强度与一道扫掠激波的基本相同,之前被两道扫掠激波"扫"起来的边界层在汇聚激波作用下还呈现锥形流动,分离线和来流的夹角也与一道扫掠激波的基本相同。     

Lot sizing with learning and forgetting in setups: Analytical results and insights

This article considers the dynamic lot sizing problem when there is learning and forgetting in setups. Learning in setups takes place with repetition when additional setups are made and forgetting takes place when there is a break between two successive setups. We allow the amount forgotten over a break to depend both on the length of the break and the amount of learning at the beginning of the break. The learning and forgetting functions we use are realistic. We present several analytical results and use these in developing computationally efficient algorithms for solving the problem. Some decision/forecast horizon results are also developed, and finally we present managerial insights based on our computational results. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 93–108, 2016     

利用实际飞行数据插值的INS/GNSS组合导航仿真轨迹发生器

针对INS/GNSS组合导航仿真中捷联惯导系统陀螺、加速度计信号高精度模拟问题,提出基于实际飞行数据插值的动态轨迹解析生成仿真算法。对转换到地心惯性坐标系中的载体姿态、位置和重力场数据进行关于时间的样条函数插值,得到载体坐标系下陀螺角速率、角增量以及加速度计比力积分增量的高精度分段解析表达式。使生成的陀螺、加速度计信号符合载体运动学和动力学特性,反映杆臂效应影响,同时与经事后处理的实测GNSS伪距、伪距率等数据特征保持一致。提出四元数约束插值算法,其可满足四元数解析插值时范数为1的约束限制条件。基于某实际无人机飞行数据,验证了所提算法的有效性,其完全满足组合导航动态仿真精度要求。该算法也适用于其他高精度高动态导航系统和刚体运动控制仿真中的角运动、线运动传感器信号模拟。     

Influence of active constrained layer damping on the coupled vibration response of functionally graded magneto-electro-elastic plates with skewed edges

This article makes the first attempt in assessing the influence of active constrained layer damping (ACLD) treatment towards precise control of frequency responses of functionally graded skew-magneto-electro-elastic (FGSMEE) plates by employing finite element methods. The materials are functionally graded across the thickness of the plate in terms of modest power-law distributions. The principal equations of motion of FGSMEE are derived via Hamilton’s principle and solved using condensation technique. The effect of ACLD patches are modelled by following the complex modulus approach (CMA). Additionally, distinctive emphasis is laid to evaluate the influence of geometrical skewness on the attenuation capabilities of the plate. The accuracy of the current analysis is corroborated with comparison of previous researches of similar kind. Additionally, a complete parametric study is directed to understand the combined impacts of various factors like coupling fields, patch location, fiber orientation of piezoelectric patch in association with skew angle and power-law index.     

Analysis on MAV/UAV cooperative combat based on complex network

A formation model of manned/unmanned aerial vehicle (MAV/UAV) collaborative combat can qualitatively and quantitatively analyze the synergistic effects. However, there is currently no effective and appropriate model construction method or theory, and research in the field of collaborative capability evaluation is basically nonexistent. According to the actual conditions of cooperative operations, a new MAV/UAV collaborative combat network model construction method based on a complex network is presented. By analyzing the characteristic parameters of the abstract network, the index system and complex network are combined. Then, a method for evaluating the synergistic effect of the cooperative combat network is developed. This method provides assistance for the verification and evaluation of MAV/UAV collaborative combat.     

模拟油罐油气混合物爆炸实验与数值仿真研究

对模拟油罐内油气混合物爆炸冲击波特性进行了研究.在直径为1 m的模拟油罐中进行了油气混合物爆炸模拟实验,建立了模拟油罐油气混合物爆炸的数值仿真模型,并借助大型商业软件Fluent6.2完成了数值仿真研究.数值仿真结果与实验值较为吻合.模拟实验和数值仿真研究的结果表明:油气体积分数、罐内初始温度等决定模拟油罐油气混合物爆炸压力的大小.油罐内爆炸压力波的振荡特性对金属油罐结构来说是有害的.     

NDIS技术在网络监测中的实现

阐述了利用NDIS进行网络包的监测和分析的基本原理,在此基础上实现了对网络适配器在数据链路层网络包的监测,并通过数据报文结构的分析,再现了应用层协议的实现过程.     

炸药冲击波激励气体辐射的数值模拟

建立了炸药冲击波激励气体辐射的物理模型和数学模型。用MMIC - 2D软件对爆炸过程进行了模拟计算。分析了冲击波作用下气体的流动特性 ,并给出了爆炸全场的密度分布及随时间的变化规律     

军用多波段数字接收机研究

本文结合软件无线电设计思想 ,研究了一种HF/VHF数字接收机 ;并从系统的角度 ,分析了各关键部件的设计 ,特别是SSB(单边带 )波形和FM (调频 )波形的数字化解调。最后给出了系统实现的硬件平台。