Programming challenges and impediments to reform: identifying pragmatic solutions

Using two recently published essays by the current writer that assesses the dismal record of performance of Planning, Programming, and Budgeting System in enabling communist legacy defence institutions in Central and Eastern Europe to develop viable defence plans, this essay argues the need for deep reforms in the region’s defence institutions. To guide this reform effort, pragmatic solutions are suggested to improve the ability of these organisations to produce viable defence plans. Recommended reforms are: (1) conduct conceptual and cultural “audits,” (2) make operational and financial data central to decision-making, (3) change current organisational sociology, (4) examine planning methods and practices, and (5) stress the need to adopt policy frameworks to drive the operation of defence institutions.     

Cf/SiC复合材料制备过程对碳纤维的损伤

对几种类型的碳纤维在Cf/SiC复合材料制备工艺中的先驱体中氧含量及高温热处理和PCS浸渍裂解处理过程中造成的损伤进行了考察,并探讨了损伤机制.结果表明,碳纤维石墨化程度和表面状态的差别会对其在复合材料制备过程中的损伤程度产生影响.石墨化程度高的M40JB碳纤维损伤程度较大;表面呈活性的JC1#碳纤维对外界条件的变化较为敏感;而石墨化程度不高而表面不活泼的JC2#碳纤维则损伤程度较小且较稳定.     

嵌入式微处理器的多层次可配置仿真工具

为了适应嵌入式定制微处理器的开发的需要 ,克服现有微处理器仿真工具的某些不足 ,文中介绍了微处理器的仿真验证工具———VCPU的设计和实现方法。同其它微处理器仿真工具相比 ,该工具具有多层次 ,可配置 ,功能全面的特点。利用该工具 ,设计者可在设计早期进行系统集成验证 ,缩短设计周期并减少设计错误。该工具已经在嵌入式微处理器开发过程中得到成功应用     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

基于多指标相似性的T/R组件剩余寿命融合预测方法

为实现对T/R组件剩余寿命的准确预测,及时掌握装备当前健康状态和提高装备维修保障水平,分析T/R组件的故障特点,筛选出反映T/R组件状态退化过程的状态监测指标,通过计算每个指标对应的剩余寿命信息和权重,得到T/R组件的剩余寿命预测结果。通过算例分析与比较,验证了预测方法的实用性与有效性。研究结果可为电子装备剩余寿命预测提供理论指导,对合理计划维修资源和提高装备战斗力具有重要意义。     

非合作目标视觉/惯导相对导航及敏感器自标定方法

利用视觉/惯导对空间非合作目标进行相对导航时,两敏感器的外参数对导航精度有较大影响。考虑到敏感器间的外参数标定复杂且耗时,提出一种利用视觉/惯导在估计相对状态过程中对其外参数进行标定的方法。该方法将视觉/惯导的外参数作为状态变量,与相对轨道运动学方程、相对姿态方程及惯导模型共同组成系统状态方程。利用该状态方程和单目视觉的观测量设计扩展卡尔曼滤波器对相对位姿、惯导偏差及视觉/惯导外参数进行估计,并通过数学仿真对该方法的有效性进行验证。仿真结果表明,该方法能够在视觉/惯导初始外参有偏差的情况下,有效估计相对位姿及惯导漂移,并对视觉/惯导外参数进行标定。     

计算机应用系统体系结构及部署方法研究

描述了Client/Server和Browser/Server两大体系结构模式及其架构的软件体系思想,并通过实例重点介绍基于.NET平台部署B/S架构的实现方法。     

阅读理解测试中常用题型的对比研究

运用定量研究的方法,探讨阅读测试中多项选择、简答和正误判断三种题型与阅读理解能力之间的关系。研究设计中的受试者为390名武警学院的战士学员。统计程序使用SPSS对数据进行相关分析和回归分析。研究结果表明：多项选择、简答和正误判断三种题型都适合测试考生的阅读理解能力,但简答题是最有效的测试题型。     

超音速等离子制备Al/Ni涂层的性能特点

以超音速等离子喷涂系统(HEPJet)为平台,采用铝包镍(Al/Ni)自粘结粉末,借助Spray Watch2i在线监测系统、扫描电子显微镜(SEM)、X射线衍射仪(XRD)和WE-10A万能拉伸试验机,研究了超音速等离子喷涂Al/Ni粒子的速度、温度及涂层的组织性能。研究结果表明:超音速等离子喷涂Al/Ni自粘结粉末时,与普通火焰喷涂不同,射流中无明显的放热反应特征,涂层中也未发现Al-Ni化合物;超音速等离子的喷涂功率、喷涂距离等参数对Al/Ni喷涂粒子的状态和涂层组织性能影响显著,当功率为54.6kW、喷涂距离为150mm时,Al/Ni涂层组织致密,与基体的结合强度高达56MPa。     

渗硫层对网格化激光淬火表面摩擦磨损性能的影响

利用低温离子渗硫技术在CrMoCu合金铸铁网格化激光淬火表面制备了渗硫层,分析了其形貌组成与结构,考察了渗硫激光复合表面的摩擦学性能。结果表明:渗硫层表面疏松多孔,在淬火区域硫化物颗粒细小,结构致密,其相组成主要为FeS;在干摩擦条件下,渗硫层能降低网格化激光淬火表面的摩擦因数,提高其耐磨性能,其主要原因是硫化物及摩擦化学反应生成的氧化物能在摩擦表面形成边界润滑膜,抑制了磨粒磨损和粘着磨损,有效减弱了网格化激光淬火表面"摩擦台阶"效应。