充分发展湍流管道内壁边界的红外定量识别

基于导热的管道内壁边界识别已发展成熟,但更贴合实际的湍流管道内壁边界的定量识别尚未见报道。通过关联COMSOL和MATLAB,利用有限元方法和Levenberg-Marquardt算法对二维轴对称充分发展的湍流管道内壁边界形状的稳态识别进行研究。数值实验证明了本方法的有效性。结果表明,在含内壁缺陷的湍流管道中,外壁最大温差和由缺陷引起的绝对温差并不是同步增加的;在进行内壁边界反问题识别时,由于绝对温差中负增长的出现,绝对温差越大,识别结果未必越好;识别精度在不规则内壁终点处略微变差。     

Bi‐objective missile rescheduling for a naval task group with dynamic disruptions

This paper considers the rescheduling of surface‐to‐air missiles (SAMs) for a naval task group (TG), where a set of SAMs have already been scheduled to intercept a set of anti‐ship missiles (ASMs). In missile defense, the initial engagement schedule is developed according to the initial state of the defensive and attacking units. However, unforeseen events may arise during the engagement, creating a dynamic environment to be handled, and making the initial schedule infeasible or inefficient. In this study, the initial engagement schedule of a TG is assumed to be disrupted by the occurrence of a destroyed ASM, the breakdown of a SAM system, or an incoming new target ASM. To produce an updated schedule, a new biobjective mathematical model is formulated that maximizes the no‐leaker probability value for the TG and minimizes the total deviation from the initial schedule. With the problem shown to be NP‐hard, some special cases are presented that can be solved in polynomial time. We solve small size problems by the augmented ? ‐ constraint method and propose heuristic procedures to generate a set of nondominated solutions for larger problems. The results are presented for different size problems and the total effectiveness of the model is evaluated.     

Optimizing natural gas pipeline transmission with nonuniform elevation: A new initialization approach

In this paper, we develop an iterative piecewise linear approximation approach with a novel initialization method to solve natural gas pipeline transmission problems with the nonuniform network elevation. Previous approaches, such as energy minimization methods, cannot be applied to solve problems with the nonuniform network elevation because they exclude pressure range constraints, and thus provide solutions far from optimum. We propose a new initialization model that considers pressure range constraints and improves the optimality of the solutions and the computational efficiency. Furthermore, we extend the energy minimization methods and provide the necessary conditions under which the extended methods operate in networks with the nonuniform elevation. We test the performances of the methods with previously reported pipeline networks from the literature, with the open data set GasLib, and with our industrial collaborator. The initialization approach is shown to be more efficient than the method with fixed initial breakpoints. The newly proposed initialization approach generates solutions with a higher accuracy than the extended energy minimization methods, especially in large‐size networks. The proposed method has been applied to natural gas transmission planning by the China National Petroleum Corporation and has brought a direct profit increase of 330 million U.S. dollars in 2015‐2017.     

求解不确定型车辆路径问题的弱鲁棒优化方法

为降低鲁棒优化模型最优解的保守性,以最小化违约车辆数和总惩罚成本为目标,建立针对旅行时间不确定的开放式车辆路径问题的弱鲁棒优化模型。对于不确定数据集的每个取值,该模型的最优解可以使其目标函数值始终不超过某数值,进而改善最优解的保守性。为提高启发式算法发现最优解的概率,提出一种自设计遗传算法对模型进行求解,其主要思想是利用粒子群算法搜索出可使遗传算法预期产生最好解的算法要素,并将其进行组合,从而产生新的遗传算法。采用新产生的遗传算法对模型继续求解,输出最好解。计算结果表明:与以往的鲁棒优化方法相比,弱鲁棒优化方法的最优解的保守性显著降低。     

慢刀伺服加工环曲面的刀具路径规划方法

如何规划刀具路径、进而获得高质量的数控加工代码,是应用慢刀伺服技术加工环曲面的关键技术之一。提出了基于等距面规划刀位点轨迹的刀具路径规划方法,推导了外凸环曲面的面形方程及其等距面方程,对比分析了两种导动曲线及两种数据点离散方法,优选了刀具路径规划方案,应用VB.net语言编写了慢刀伺服加工环曲面用数控代码生成软件,在Vericut平台上对数控代码进行了仿真验证,直观地展示了虚拟加工面相对理论曲面的残留区域,仿真结果验证了方法的可行性。结果表明:将外凸环曲面方程中的非一次常数项a变为a+r_d,即得到外凸环曲面的等距面方程;所提刀具路径规划方法适用于慢刀伺服加工外凸环曲面;该方法对应用慢刀伺服技术加工其他面型的光学镜面具有借鉴价值。     

常规导弹作战批量测试优化研究

短时间内测试大批量合格的常规导弹是未来作战的客观要求.结合导弹部队的作战实际情况,分析了当前技术阵地测试所面临的问题,提出了一些改革的方法.改造技术阵地测试设备,提高操作人员的熟练程度,采用并行技术和关键路技术优化导弹测试流程,同时建立战时应急状态下的测试流程,特别是导弹批量测试技术的提出,将极大地提高导弹测试速度,缩短测试时间,为将来技术阵地的建设提供了建议,同时也对将来常规导弹的设计和研制提出了更高的要求.     

Solving generalized transportation problems via pure transportation problems

This paper investigates certain issues of coefficient sensitivity in generalized network problems when such problems have small gains or losses. In these instances, it might be computationally advantageous to temporarily ignore these gains or losses and solve the resultant “pure” network problem. Subsequently, the optimal solution to the pure problem could be used to derive the optimal solution to the original generalized network problem. In this paper we focus on generalized transportation problems and consider the following question: Given an optimal solution to the pure transportation problem, under what conditions will the optimal solution to the original generalized transportation problem have the same basic variables? We study special cases of the generalized transportation problem in terms of convexity with respect to a basis. For the special case when all gains or losses are identical, we show that convexity holds. We use this result to determine conditions on the magnitude of the gains or losses such that the optimal solutions to both the generalized transportation problem and the associated pure transportation problem have the same basic variables. For more general cases, we establish sufficient conditions for convexity and feasibility. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 666–685, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10034     

对办好高等院校研究生课程进修教育的思考

近年来,高校纷纷举办各种形式多样的在职研究生课程进修班,针对这一新生的、过热的教育形式,本文从其定位和目前存在问题等方面进行系统分析,并提出了进一步办好研究生课程进修班的措施.     

析通信线路消防安全管理方面存在的问题

针对我国通信行业与公安消防部门就通信线路和建构筑物之间安全距离规定不统一 ,分析我国通信线路消防安全管理方面存在的问题 ,并提出改进通信线路消防安全管理的建议     

A specially structured nonlinear integer resource allocation problem

We present an algorithm for solving a specially structured nonlinear integer resource allocation problem. This problem was motivated by a capacity planning study done at a large Health Maintenance Organization in Texas. Specifically, we focus on a class of nonlinear resource allocation problems that involve the minimization of a convex function over one general convex constraint, a set of block diagonal convex constraints, and bounds on the integer variables. The continuous variable problem is also considered. The continuous problem is solved by taking advantage of the structure of the Karush‐Kuhn‐Tucker (KKT) conditions. This method for solving the continuous problem is then incorporated in a branch and bound algorithm to solve the integer problem. Various reoptimization results, multiplier bounding results, and heuristics are used to improve the efficiency of the algorithms. We show how the algorithms can be extended to obtain a globally optimal solution to the nonconvex version of the problem. We further show that the methods can be applied to problems in production planning and financial optimization. Extensive computational testing of the algorithms is reported for a variety of applications on continuous problems with up to 1,000,000 variables and integer problems with up to 1000 variables. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 770–792, 2003.