系统状态方程的信流图描述

本文从基本概念出发,结合两个具体电路讨论如何用信流图建立系统标准状态方程的方法。     

微波雷达目标信号模拟器及其应用

本文为在野战条件下检测雷达测距系统的性能提供一种新型微波目标信号模拟器,闸述其工作原理及功能。除在检测雷达测距系统性能上已得到实际应用外,还论述了可以进一步开发的应用项目,因为不受场地和气候条件的限制,从而获得较好的效能、效率和效益。     

2(1/2)谱在直升机声信号特征提取中的应用

介绍了四阶累积量对角切片的一种定义,分析了其傅里叶变换(212谱)在提取三次相位耦合特征方面的良好性能及其估计方法;将其应用于具有三次相位耦合的直升机声信号特征提取。仿真结果表明,利用该方法能够分析信号的三次相位耦合信息,且具有计算方法简单、运算速度快及良好的抑制高斯噪声的优点。实际的数据处理结果验证了该方法的有效性。     

小波分析在电子装备供电设备故障检测中的应用

新型电子装备供电设备封装性能好,可及测点少,故障检测和诊断难度大.在分析供电设备声信号产生机理的基础上,提出了一种利用小波分析理论对声信号进行处理,实现非接触、不解体故障检测与诊断的方法.论证了频带能量分析法和极大值分析法提取故障特征信息的可行性,并给出了故障特征参数算法.实验证明,该方法能有效地检测和诊断故障.     

Characteristics structure analysis on debris cloud in the hypervelocity impact of disk projectile on thin plate

In this paper, the gauge points setting is introduced in the SPH simulation to analyze the debris cloud structure generated by the hypervelocity impact of disk projectile on thin plate. Compared with the experiments, more detailed information of the debris cloud structure can be classified from the numerical simulation. However, due to the solitary dispersion and overlap display of the particles in the SPH simulation, accurate comparison between numerical and experimental results is difficult to be performed. To track the velocity and spatial distribution of the particles in the debris cloud induced from disk and plate, gauge points are locally set in the single-layer profile in the SPH model. By analyzing the gauge points’ spatial coordinate and velocity, the location and velocity of characteristic points in the debris cloud are determined. The boundary of debris cloud is achieved, as well as the fragments distribution outside the main structure of debris cloud.     

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave (RDW), a series of experimental tests were carried out on the rotating detonation combustor (RDC) with air-heater. The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygen-enriched air, respectively. The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35% unchanged, and the total mass flow rate is maintained at about 1000 g/s, changing the total temperature of the oxygen-enriched air from 620 K to 860 K. Three different types of instability were observed in the experiments: temporal and spatial instability, mode transition and re-initiation. The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time. Moreover, the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially. The phenomenon of single-double-single wave transition is analyzed. During the transition, the initial RDW weakens until disappears, and the compression wave strengthens until it becomes a new RDW and propagates steadily. The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.     

近地卫星Ka频段数传链路抗雨衰自适应模式设计

针对近地卫星数传时的信道时变性和严重的Ka频段雨衰现象,采用自适应编码调制(Adaptive Coding and Modulation, ACM)技术能够充分利用链路资源,相对于传统的固定编码调制方式,进一步提高链路的数据吞吐量。提出近地卫星Ka频段数传链路ACM模式设计方法,在降雨环境下建立Ka频段数传链路模型,根据链路预算的信道状况确定ACM选用模式;采用基于导频符号的最大似然信噪比估计算法结合移动平均的平滑方法实现信道估计,有效地减小了估计值的波动。仿真结果表明,无论晴天还是雨天,采用提出的卫星数传链路ACM模式设计方法,能够在保证系统可靠性的同时获取较高的数据吞吐量。     

载频带宽同步倍频的高频大带宽线性调频信号光产生方法

针对高载频、大带宽线性调频信号产生需求,提出一种基于级联马赫-曾德尔调制器(Mach-Zehnder Modulator, MZM)的载频带宽同步倍频的高载频、大带宽线性调频信号光产生方法。理论分析表明,通过合理设置级联MZM的直流偏置点和线性调频信号幅度等参数,可产生载频和带宽同步倍频且倍频系数可调的线性调频信号。在此基础上利用光学系统软件进行相应的仿真验证,利用载频和带宽分别为5 GHz和2 GHz的线性调频信号产生了载频和带宽分别为40 GHz、15.07 GHz和58.25 GHz、19.5 GHz的线性调频信号。仿真结果验证了该方法的可行性,也验证了产生的信号具有较好的压缩性。     

混沌信号在弹载雷达成像中的应用

传统的线性调频信号在雷达成像中存在旁瓣电平过高,参数容易被截获等缺点。为了提高成像雷达的抗干扰性能和分辨能力,将混沌调频信号用于弹载成像雷达系统,建立了SAR工作的空间几何模型,在此基础上分析了回波特性,并对点目标进行了成像仿真,重点对成像性能进行了分析。结果表明,混沌调频信号用于弹载成像雷达系统可获得比较理想的点目标图像,使系统具有强抗干扰性能,有着良好的发展前景。     

单信道时频重叠MPSK信号的调制识别方法

提出一种基于高阶循环累积量的调制识别算法,用于解决单信道两个时频重叠M PSK信号的调制识别问题。对接收到的重叠信号进行预处理,计算其四阶循环累积量,提取分类特征参数,采用最小误差准则算法实现时频重叠双信号的自动分类。理论分析和仿真试验结果均证明了算法的正确性和有效性。