气液两相管流流型识别理论研究进展

综述了气液两相流流型识别理论及方法的研究进展。首先探讨了流型划分问题,然后针对水平管路、垂直管路及摇摆管路介绍了两相流流型转换机理及转换的边界条件;对于流型的在线识别,介绍了基于波动理论、神经网络和图像处理的流型识别方法。最后提出了气液两相管流流型识别中亟待开展的理论研究方向。     

基于TMS320C6416芯片的多板卡声纳信号协同处理技术

针对单DSP系统不能满足多路声纳信号实时处理的要求,提出了基于TMS320C6416芯片的多板卡声纳信号协同处理技术,介绍了协同处理中DSP之间以及DSP与主控计算机之间的数据传输方法和软件实现流程,该技术可通过增加信号处理板卡扩展系统的处理能力,具有较好的灵活性。实验结果验证了系统协同处理的正确性。     

二维超声速空气引射器启动特性试验研究

超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空,可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据:当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

基于改进遗传算法的平流层飞艇定点悬停控制(英文)

平流层飞艇定点悬停控制是飞艇应用领域的关键技术。该控制问题可以转化为非线性多目标优化问题来求解。遗传算法是解决现代非线性多目标优化问题的一种重要方法。但是基本遗传算法在解决定点悬停飞艇实际控制问题时,具有易陷入局部最优解、在遗传进化过程中随机性较强、搜索效率低下及耗时多等缺陷。通过借鉴并行遗传算法、模拟退火算法和向量评价遗传算法的基本思想,在基本遗传操作中添加切断算子和拼接算子,设计一种改进遗传算法来改善上述缺陷。仿真结果表明该方法是有效可行的。     

基于多线程的CABAC并行编码方法

CABAC(Context based Adaptive Binary Arithmetic Coding)是H.264/AVC主要档次以上配置中推荐采用的熵编码方法.相比其他的熵编码方法,CABAC能够节省编码码率,但其计算串行性强,不能较好适应片上多核环境.针对这一问题提出了基于多线程的CABAC并行编码方法.大量实验统计表明,该方法负载划分较为均衡,对序列熵编码的单独加速比最高可达1.78.     

大数据视角下的心理战效果评估

心理战效果评估是对心理战对敌毁伤效能的评估,是战争各方都很关注的重点领域,也一直是困扰心理战研究者的难题,有效评估心理战的效果对心理战过程形成完整闭锁回路、确定心理战实施重点方向和促进心理战战略战术手段的发展有着至关重要的作用。目前,对心理战效果评估的研究已取得了一系列学术成果,为效果评估的实施和实际操作提供了强有力的理论支撑,但现有研究多为指标体系建立等理论的提出和界定,缺少实际操作性的思路,本文主要从大数据的视角来探究心理战效果评估,并尝试从大数据技术的应用角度阐述大数据和心理战效果评估的融合。      

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

地面战场侦察传感器系统的发展状况及技术分析

主要介绍了国内外地面战场侦察传感器系统的主要用途、基本组成和分类,对其未来发展趋势进行了分析,根据我军地面战场侦察传感器系统的技术现状提出了需要解决的关键问题。