二维带限信号代数正则外推算法

用代数正则化方法直接将连续的数学模型离散化,然后用Tikhonov正则化方法求解代数方程组,构造稳定的正则化算法,并进行数值仿真,结果是满意的。     

一种基于改进的SEVQ 匹配算法的汉语全音节语音识别系统

本文全面介绍了一种采用改进的ＳＥＶＱ匹配算法的特定人汉语语音识别系统,具体描述了系统总体方案、系统参数的选取策略、各种识别预处理所用方法及语音模式匹配原理和方法。系统的实时识别率超过９３％     

复合导线高电导性的实验及其应用前景

分析了铜包钢和铜导线内导体同轴电缆的电性能检测实验,从而证实复合导线的高电导特性,并指出该特性的应用前景和实用价值.     

神经网络在声纳目标识别中的研究进展

综述了神经网络在声纳信号预处理、目标特征提取及其自动分类方面的研究进展,简要分析了神经网络模型的特点和在应用中的局限性。并对该领域的发展趋势提出了自己的看法。     

一种多功能微型计算机接口

文中给出一种多功能微型计算机接口,可应用于微机控制、信号测试,电路自检、故障诊断及数字信号产生等技术领域,是一种功能较强的调试、控制和测试手段,具有一定的实用价值。     

载荷识别及其精度改善

本文系统地建立了载荷识别方法,详细探讨了提高载荷识别精度的途径,得到了载荷识别过程中信号处理加窗原则和试验的一般技术要求,使识别精度明显提高。     

利用线阵CCD自动测量MSBS中悬浮模型的位置与姿态

以我国自行研制的磁悬挂天平系统为背景,主要研究了利用线阵CCD传感器构建MSBS的模型位置与姿态测量系统以及相应的传感器配置方案、信号转换、测量原理和测量流程等问题。该系统的位置与姿态测量系统以两组共5片线阵CCD作为MSBS中悬浮模型的5自由度位置与姿态传感器,以串联的多级惯性环节电路为脉宽-电压转换电路,将测量信号分别输入控制回路和校准测量回路。文中详细介绍了5片CCD传感器的配置方案及其测量原理,然后研究了使用多级惯性环节实现脉宽-电压信号的转换问题,并对该方案进行了理论分析和仿真,最后研究了利用CCD的测量信号反演悬浮模型位置与姿态的数学原理及其自动测量流程。     

Development of multi-physics numerical simulation model to investigate thermo-mechanical fatigue crack propagation in an autofrettaged gun barrel

In this research, a detailed multi-physics study has been carried out by numerically simulating a solid fractured gun barrel for 20 thermo-mechanical cycles. The numerical model is based on thermal effects, mechanical stress fields and fatigue crack mechanics. Elastic-plastic material data of modified AISI 4340 at temperatures ranging from 25 to 1200 °C and at strain rates of 4, 16, 32 and 48 s⁻¹ was acquired from high-temperature compression tests. This was used as material property data in the simulation model. The boundary conditions applied are kept similar to the working gun barrel during continuous firing. A methodology has been provided to define thermo-mechanically active surface-to-surface type interface between the crack faces for a better approximation of stresses at the crack tip. Comparison of results from non-autofrettaged and autofrettaged simulation models provide useful information about the evolution of strains and stresses in the barrel at different points under combined thermo-mechanical loading cycles in both cases. The effect of thermal fatigue under already induced compressive yield due to autofrettage and the progressive degradation of the accumulated stresses due to thermo-mechanical cyclic loads on the internal surface of the gun barrel (mimicking the continuous firing scenario) has been analyzed. Comparison between energy release rate at tips of varying crack lengths due to cyclic thermo-mechanical loading in the non-autofrettaged and autofrettaged gun has been carried out.     

间接边界元法模拟含裂纹介质中弹性波的传播

介绍了间接边界元法的基本理论,利用二维弹性动力边界积分方程解决了地震波在含裂纹介质中的散射问题。编写了地震波在二维非均匀介质中传播的数值模拟程序,模拟了爆炸点源在含裂纹介质中的传播情况,分析了裂纹的分布及填充物对波传播的影响。结果表明,边界元法是研究含裂纹介质中弹性波传播的有效工具。     

舰载武器系统信号源中同步控制电机快速归零技术

阐述了同步控制电机的零位定义,提出了一种基于相位判别的同步控制电机快速归零方案、单片机控制电路及算法,在舰载武器系统信号源中的应用表明,利用此方案归零同步控制电机速度快、精度高,效果非常理想.