高精度分数时延滤波器设计的边界拟合Remez算法

在卫星星间测距模拟信号仿真及实际测试中,为提高测距模拟信号精度和系统可用带宽,提出基于边界拟合Remez算法的高精度分数时延滤波器的设计算法。该算法利用Farrow结构的多项式近似思想,采用多项式拟合Remez算法设计滤波器的冲激响应边界系数,通过多相分解实现分数时延滤波器组。该算法改善了当设计的滤波器阶数较高时冲激响应边界的不连续现象,进而降低了群时延误差,提高了精度。仿真结果表明,该算法设计的滤波器的分数时延精度得到了提高,同时系统可用带宽提高近一倍,实现时需使用的乘法器数目也有明显降低。     

Local search methods for the discrete time/resource trade-off problem in project networks

In this paper we consider the discrete time/resource trade-off problem in project networks. Given a project network consisting of nodes (activities) and arcs (technological precedence relations), in which the duration of the activities is a discrete, nonincreasing function of the amount of a single renewable resource committed to it, the discrete time/resource trade-off problem minimizes the project makespan subject to precedence constraints and a single renewable resource constraint. For each activity, a work content is specified such that all execution modes (duration/resource requirement pairs) for performing the activity are allowed as long as the product of the duration and the resource requirement is at least as large as the specified work content. We present a tabu search procedure which is based on a decomposition of the problem into a mode assignment phase and a resource-constrained project scheduling phase with fixed mode assignments. Extensive computational experience, including a comparison with other local search methods, is reported. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 553–578, 1998     

椭圆弹道射程角和飞行时间公式的一种推导方法

本文利用椭圆弹道长轴方向有一常量的性质,计算了被动段弹道的射程和飞行时间。     

测量TOA和DOA的单站无源定位跟踪可观测条件

单站无源定位跟踪技术中,可观测性分析是一个关键问题,但是由于TOA测量方程的非线性程度太高,直接通过计算Jacobin矩阵得到的可观测矩阵形式非常复杂,很难得出明确的分析结果。采用新的思路推导了一种TOA测量方程的线性化方程,分析了测量TOA和DOA单站无源定位的可观测条件。最后给出了计算机仿真结果。     

Determining a threshold control policy for an imperfect production system with rework jobs

Consider a threshold control policy for an imperfect production system with only a work center handling both regular and rework jobs. An imperfect production system studied here, generates defect jobs by factors other than machine failures. A threshold control or (ω, s) policy sets the guideline for a work center to switch between regular and rework jobs. A production cycle begins with loading and processing of several batches of regular jobs with a lot size equal to s. The outcome of each completed regular job is an independent Bernoulli trial with three possibilities: good, rework, or scrap. Once the work center accumulates more than a threshold ω of rework jobs, it finishes the last batch of regular jobs and switches to rework jobs. The objective of this research is to find a threshold ω and a lot size s that maximize the average long‐term profit. The ultimate goal is to construct a simple algorithm to search for ω and s that can be implemented directly in production management systems, as a result of this work. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 273–301, 1999     

数字式单边带调制的关键及实现方法

分析了传统模拟方法实现单边带调制的不足,给出了用数字信号处理方法实现单边带调制的实现方法,并分析了其中的正交调制、内插技术等关键技术,在此基础上设计并实现了一个以TI TMS320 芯片为核心的数字式单边带调制系统.与模拟调制法相比,该电路结构简单,性能稳定可靠.     

通用计算机实时仿真技术

通用计算机由于各种相互兼容的标准硬件及丰富的应用软件支持而获得了广泛的应用,但通用计算机往往运行多任务的操作系统,这种通用操作系统一般不能满足半实物仿真的实时性要求。讨论了通用计算机半实物仿真的实时时钟获取方法,重点研究了通用操作系统的帧时间不稳定问题。提出了保证实时仿真帧时间的几种方法,并建立了一个具体的通用仿真计算机系统。试验结果表明,基于通用计算机的实时仿真是可行的。     

基于PIC系列单片机的迫弹电子时间引信控制系统设计

介绍了迫弹电子时间引信控制系统的电路组成、工作原理及其功能,并以PIC16F873A型单片机作为控制器核心,对引信的工作过程进行控制,提高了引信的安全性和可靠性。     

天基核爆光辐射探测方法研究

通过计算提出了天基核爆炸光辐射探测指标要求,根据对源项信号特征的分析,设计了具有通带为1～4000Hz带通滤波器的天基核爆光辐射探测电路,采取了降噪措施,并以实验检验了其灵敏度、信噪比、频率响应和动态范围等性能,提出了软件修正系统误差的方法．     

一类非线性动力系统的时滞反馈分叉控制

对时滞控制作用下的参数激励van der Pol-Duffing方程进行了研究,着重研究了时滞参数对该类参数激励系统的1/2亚谐共振-主参数共振分叉响应控制。首先采用摄动法从理论上推导出时滞动力系统的分叉响应方程,再采用数值模拟的方法研究了时滞参数对系统分叉响应的影响。研究结果表明,适当选取时滞参数,不仅可以改变分叉响应曲线的拓扑形态,还可以平移分叉响应曲线,即使其分叉提前或滞后,还能同时满足这两种要求。