三轴光纤陀螺复用方案的初步探讨

分析了三轴光纤陀螺组合技术方案的光路和电路结构,设计了一种三轴光纤陀螺时分复用方案,对比了试验样机分时与不分时的性能指标．     

硅整流无刷发电机供电系统动态性能的研究

分析了坦克的供电系统中采用硅整流无刷发电机时的工作特点,建立了这种系统的数学模型,举例说明了计算方法,并在文章的最后进行了评价.     

磁悬挂天平五自由度位置传感器的数学分析

磁悬挂平天的位置传感器具有一定的特殊性,它需要同时获取被悬挂的飞行器模型的多自由度位置分量。本文对这一问题进行了研究,并讨论了其工程实现问题。     

N元光纤光栅传感器阵列解调信号的最低可见度分析

研究了非平衡光纤Mach-Zehnder干涉仪解调N元光纤光栅传感器阵列时的偏振衰落问题.运用邦加球和光纤偏振光传输理论,利用简化模型,通过详细的理论分析,得到优化控制下阵列传感信号最低可见度的下限表达式,并通过计算机仿真,验证了结果的正确性,并详细分析了仿真实验的结果.     

Experimental investigation for machinability aspects of graphene oxide/carbon fiber reinforced polymer nanocomposites and predictive modeling using hybrid approach

This article explores the drilling behavior of polymer nanocomposites reinforced by Graphene oxide/Carbon fiber using a hybrid method of Grey theory and Principal component analysis (GR-PCA). An online digital dynamometer was employed for the evaluation of Thrust Force and Torque. The image processing technique computes the delamination. Response surface methodology (RSM) considers the parameters, namely, drilling speed (S), feed rate (F), Graphene Oxide wt.% (G) in designing the experimentation array. Principal component analysis (PCA) was used to tackle the response priority weight during the combination of multiple functions. Analysis of variance (ANOVA) scrutinized the influence of parameters and intended the regression models to predict the response. GR-PCA evaluated the optimal parametric setting and remarked that feed rate acts as the most predominant factor. The higher feed rate and wt.% of G is responsible for surface damages like fiber pull-out, fiber fracture and cracks. A significant improvement in drilling responses has been obtained and also validates through confirmatory test and microstructure investigations.     

Si3 N4基复相陶瓷天线罩材料的制备及性能

基于高马赫数导弹天线罩为应用背景,以Si粉、BN粉、SiO2粉为主要原料,采用反应烧结法制备Si3N4基复相陶瓷材料,探讨了原料组成、成型工艺及坯体密度对材料性能的影响。试验结果表明:当原料中Si、BN和SiO2分别为55%、30%和10%时,材料强度可达96.7MPa,断裂韧性可达1.80MPa.m1/2。同时材料具有良好的介电性能及热物理性能。     

基于PON技术的多站雷达数字光纤传输系统设计

提出一种多站雷达体系雷达数据光纤传输系统的方案设计和实现方法。与传统雷达使用的光纤传输系统不同,而是采用技术较新的基于无源光网络PON的实时数据通信系统,这是无源光网络技术在多传感器实时通信领域的首次应用。在系统设计中利用先进的光电子和在编程技术,实现了点对多点雷达数据光纤传输,提高了信号传输质量,同时系统具有动态接入和扩容的能力。     

L波段掺铒光纤放大器增益钳制及提高特性研究

报道了一种新型980 nm激光二极管(LD)泵浦高增益的掺铒光纤放大器(EDFA).通过加入中心波长为1 550 nm光纤光栅(FBG)可以明显提高增益,并分析了增益钳制的原理.实验得到其增益比无FBG结构EDFA提高8 dB,并得到了小信号输入时增益25 dB的有效钳制.     

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

High-performance ballistic fibers, such as aramid fiber and ultra-high-molecular-weight polyethylene (UHMWPE), are commonly used in anti-ballistic structures due to their low density, high tensile strength and high specific modulus. However, their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure. In contrast, carbon fiber reinforced epoxy resin matrix composites (CFRP) have the characteristics of high modulus in the thickness direction and high shear resistance. However, carbon fibers are rarely used and applied for protection purposes. A hybridization with aramid fiber reinforced epoxy resin matrix composites (AFRP) and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites. The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated. Through conducting mechanical property tests and ballistic tests, two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software, respectively. The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced. The ballistic tests’ results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7% of AFRP. When CFRP was on the striking face, the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage. The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process. These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt% and 30 wt%.     

地面防空作战ADSL通信

就现代地面防空作战中通信技术进行了研究,利用光纤、ADSL(不对称数字用户线)宽带技术解决在地面防空通信网中数据传输的瓶颈问题。