Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

太空目标监视装备作战试验设计研究

按照现行装备试验鉴定体制的要求,装备作战试验是新研太空目标监视装备在正式交付使用单位前必须完成的一类试验。太空目标监视装备具有精密昂贵、价值高、单台套、集成度和复杂度高等特点,开展作战试验与普通的侦察探测装备和常规兵器区别较大。本文介绍了太空目标监视装备作战试验的对象与要求,分解了太空目标搜索发现、监视管理、目标识别、信息共享等实战能力和实战能力的生成与保持要求,构建了作战试验评估指标体系,并依据太空目标监视任务剖面和环境剖面设计了作战试验项目,基于作战试验指标考核评估确定了评估数据采集需求,紧贴太空目标监视装备实际使用面临的环境条件构设了逼真的作战试验环境条件。这些研究可为太空目标监视装备作战试验实践提供支持。     

Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.     

A method to determine the shell layout scheme for equipment battlefield damage tests under artillery fire

In this paper,a new method for determining the shell layout scheme is proposed,which can make the equipment damage data by the battlefield damage test resemble as close as possible the actual combat data.This method is based on the analysis of the impact point distribution and effective damage area of equipment.In order to obtain the position of the impact points,an impact point distribution model under artillery fire was established.Similarly,in order to obtain the effective damage area of equipment,the concepts of generalized damage area and task-based equipment functional damage probability were demonstrated,and the corresponding calculation model was established.Through case analysis,the shell layout scheme was effectively obtained,verifying the correctness of the proposed method.     

超声速地空导弹热环境风洞模拟研究

根据国内风洞的情况,比较了超声速地空导弹的飞行条件与风洞模拟能力的差距,分析了热环境风洞实验中应采用的相似准则,以及实验数据的处理方法。     

自动装弹机开放式自动测试系统的设计研究

针对自动装弹机故障难以检测、现有检测方法重复开发和利用效率不高等现象, 提出了自动装弹机开放式自动测试系统的概念, 分析了检测系统硬件和软件构成, 详细讨论了通用检测平台的功能组成, 为军用和民用产品的检测提供了一种新方法。     

弹药供应站配置地域选定辅助决策模型

建立了用于评估弹药供应站配置地域的指标体系, 利用层次分析法对各个指标进行了权重分配, 得到了弹药供应站配置方案的择优方法, 并运用模型进行了模拟决策。本模型已经在计算机上编程实现。     

装备保障兵力机动模型的建立

在分析未来战争中机动作战对装备保障要求的基础上,明确了建立装备保障兵力机动模型的重要性。通过分析影响装备保障部(分)队机动状况的因素,建立了装备保障部(分)队的机动模型,研究了模型的计算流程。     

沉浸式虚拟维修仿真中的穿越处理问题研究

沉浸式虚拟维修环境下,物体间发生穿越的碰撞问题可以分为3类:1点接触,2点接触和3点及3点以上接触。采用改变碰撞物体的运动方向和距离的方式来避免物体间穿越现象的发生。并以实例的方式对其有效性进行了验证。     

基于马尔可夫预测的低消耗弹药库存仿真建模分析

应用马尔可夫方法的无后效性原理,建立了低消耗弹药库存的预测模型,为该类弹药的年度供应提供依据。在模型建立的基础上,对其仿真算法进行了描述,并应用计算机进行了仿真实现。