单片机控制的指挥仪航路产生系统

本文首先介绍单片机控制的指挥仪航路产生系统的原理及组成,重点讨论了目标现在点坐标由数字量到指挥仪所需要的模拟信号的转换方法,最后对该系统的误差结果进行了分析。     

U-D分解单步迭代滤波在飞行状态估计中的应用

针对单步迭代滤波常规算法数值鲁棒性差、滤波易于发散的缺点对误差协方差矩阵使用了 U - D分解 ,从而形成了一种基于 U - D分解的单步迭代滤波算法。该算法提高了数值鲁棒性 ,并且对相关的量测噪声有一定处理能力 ,应用于飞行状态的估计问题 ,获得了较为满意的结果     

A note on combined job selection and sequencing problems

We investigate the solvability of two single‐machine scheduling problems when the objective is to identify among all job subsets with cardinality k,1≤k≤n, the one that has the minimum objective function value. For the single‐machine minimum maximum lateness problem, we conclude that the problem is solvable in O(n²) time using the proposed REMOVE algorithm. This algorithm can also be used as an alternative to Moore's algorithm to solve the minimum number of tardy jobs problem by actually solving the hierarchical problem in which the objective is to minimize the maximum lateness subject to the minimum number of tardy jobs. We then show that the REMOVE algorithm cannot be used to solve the general case of the single‐machine total‐weighted completion time problem; we derive sufficient conditions among the job parameters so that the total weighted completion time problem becomes solvable in O(n²) time. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 449–453, 2013     

有限声速的纯方位算法

针对纯方位条件下对等速直航目标观测的算法问题,将目标运动要素及平均声速作为待估计参数,给出了计算非线性最小二乘法目标函数梯度与Hessian矩阵的解析公式,基于这些公式,可以构造估计目标运动要素的一些算法及编程实现。部分数值实验表明,信赖域算法、Levenberg-Marquardt算法与Matlab用于解非线性最小二乘问题的函数lsqnonlin的计算精度基本一致。     

A PANEL DATA ANALYSIS OF THE NEXUS BETWEEN DEFENCE SPENDING AND GROWTH IN THE EUROPEAN UNION: A COMMENT

Abstract

This paper explains and assesses the UK experience with determining prices and profitability for non-competitive defence contracts. Three periods are considered, namely pre-1968, the 1968 Profit Formula Agreement and the changes introduced in 2014. Two cases of ‘excessive’ profits were major determinants of the 1968 Profit Formula Agreement; but continued dissatisfaction with the 1968 Agreement led to changes in 2014. The historical overview of UK experience provides a basis for understanding current UK policy and offers insights for other countries facing similar policy challenges. A critique is presented of UK policy on single source pricing and profitability.     

伺服系统速度环控制器参数的自整定及优化

针对交流伺服系统速度环控制器参数自整定及优化的需求,为使工程技术人员避免繁琐的调参过程,提出了一种基于转动惯量辨识的速度环控制器参数自整定及优化方法。首先,采用频率法分析伺服系统速度环控制器参数的设计规则;随后,采用遗忘因子递推最小二乘法,对控制器参数设计所需的系统转动惯量进行辨识;最后,在此基础上利用设计的变步长迭代算法,完成控制器参数寻优过程。仿真结果表明,采用遗忘因子递推最小二乘法,能够有效辨识出电机轴端的转动惯量。提出算法进行整定及优化后,速度环控制器参数能使系统具有良好的动态响应和鲁棒性。     

基于CPLD与单片机的多路高精度数据采集系统设计

结合CPLD与单片机设计了一种多路高精度数据采集系统,最高可达24位转换精度。所采集数据具备良好的实时性,可采集通道数目多,同时系统具备较强的抗外界干扰能力,结构简单,可靠性好。该系统具有较强的可移植性,能够广泛应用于多路、高精度、低频数据采集的场合。     

FAE野外空中爆炸效应实验研究及其一次起爆机理探讨

野外进行1．8kg的FAE静爆实验,采用不同配方的纯固态燃料和液一固混合燃料与等质量的TNT对比分析。实验结果表明,FAE的爆炸效果明显优于等质量的TNT,而纯固态FAE爆炸性能强于液一固混合FAE;FAE爆炸后测到的超压分布呈现单调减趋势,这是由于测量点都分布在云爆区范围之外;FAE的云雾分散效果优于等质量的TNT装药,火焰持续时间也长。通过高速摄影图片看出,合适配方的纯固态无约束的FAE弹体火球的持续时间与有约束的液一固混合FAE弹体相当。分析了纯固态FAE爆炸后超压峰值时刻与火球最大直径时刻不同步的原因,探讨了纯固态FAE一次起爆机理。     

近程简易控制火箭末修的效率分析

阐述了脉冲控制力实施简易控制的特点,针对某近程单兵火箭建立了其弹道模型,在弹体周向布置两种大小不同的脉冲发动机,采用两种脉冲延时分级控制的控制策略对其实施简易控制,对其控制时刻、转速影响、分档设计等进行了分析证明对该单兵火箭实施简易控制是可行的.     

On equivalence between the proportionate flow shop and single‐machine scheduling problems

We derive sufficient conditions which, when satisfied, guarantee that an optimal solution for a single‐machine scheduling problem is also optimal for the corresponding proportionate flow shop scheduling problem. We then utilize these sufficient conditions to show the solvability in polynomial time of numerous proportionate flow shop scheduling problems with fixed job processing times, position‐dependent job processing times, controllable job processing times, and also problems with job rejection. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 595–603, 2015