就业问题对边防部队思想政治工作的影响

军人就业问题对边防部队思想政治工作有很大的影响 ,必须努力创造良好的军人就业条件 ,打牢部队“打得赢 ,不变质”思想政治工作的基础。     

The gradual covering problem

In this paper we investigate the gradual covering problem. Within a certain distance from the facility the demand point is fully covered, and beyond another specified distance the demand point is not covered. Between these two given distances the coverage is linear in the distance from the facility. This formulation can be converted to the Weber problem by imposing a special structure on its cost function. The cost is zero (negligible) up to a certain minimum distance, and it is a constant beyond a certain maximum distance. Between these two extreme distances the cost is linear in the distance. The problem is analyzed and a branch and bound procedure is proposed for its solution. Computational results are presented. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

BBO晶体II型相位匹配光参量振荡器的输出线宽

采用355nm脉冲激光作为泵浦源,对影响BBO晶体II型相位匹配光参量振荡器输出线宽的各种物理机制进行了数值模拟计算和分析。结果表明,II型相位匹配是光参量振荡器获得窄线宽的有效而简单的手段。     

极大单调算子零点的逼近问题

设H为实Hilbert空间,C为H的非空闭凸子集,T:C→2H为极大单调算子,假设S(T)={x∈H:0∈Tx}≠Φ。 xk∈H,βk>0,求 xk及ek满足( )　　xk+ek∈ xk+βkT( xk),‖ek‖≤ηk‖xk- xk‖, k≥0,其中,ηk≥0,supk>0ηk<1,βk≥β>0。设PC:H→C为H到C上的最近点投影算子,定义xk+1=PC( xk-ek),k≥0,证明了若T满足(S)型条件,则{xk}k≥0强收敛于T的某个零点。     

单一来源同类装备价格形成机制存在的问题及对策

近年来,随着国防和军队全面深化改革的深入推进和装备建设的快速发展,装备价格管理工作的重要性不断提升,但军队目前承担的装备审价任务日趋繁重,存量不减、增量日增等新情况和新问题给装备价格管理工作带来了新挑战。本文以单一来源同类装备为研究对象,借鉴《军品定价议价规则(试行)》中竞争议价和征询议价不审价的原理,从单一来源同类装备价格的形成主体、装备审价任务量、装备价格的测算方法、装备价格的形成过程以及装备价格的影响因素等五个方面分析了价格形成机制存在的问题,并从主观因素和客观因素两方面探讨了存在问题的原因,提出应在明确价格形成主体的职能权限、科学确定价格的测算方法、完善价格法律法规、建设价格数据平台、加强价格人才队伍建设等方向优化单一来源同类装备价格形成机制的对策建议。     

Dynamic impact protective body armour: A comprehensive appraisal on panel engineering design and its prospective materials

Personal body armour is one of the most important pieces of equipment to protect human beings from various critical and fatal injuries. In today’s modern world, various organizations including law enforcement and security service have made it mandatory for their personnel to wear personal protection system while on field duty. However, the systems should comprise an improved ballistic performance, light-weighted, flexible as well as comfortable panel not only to be accepted with a wider range but also for effective performances of the consumer. Generally, the overall performances of the protective body armour could be affected by various parameters including armour design techniques, type of materials used and finishing of the panels. The current paper aims to critically review state-of-art for armour panel design techniques and the different perspective body armour materials. The paper starts by discussing the different body armour and its category. Later, the different states of technology for armour panel design (mostly for women), its problems and the possible solutions will be cited. Later, the commonly used different polymeric fibrous and the future possible advanced materials including carbon nanotube (CNT), Graphene CNT and shear thickening fluids (STFs) treated materials for developing the reinforced body armour panel will be discussed. The authors believe that this paper will enlighten useful guidelines and procedures about the different panel design techniques and current and promising future materials for researchers, designers, engineers and manufacturers working on the impact resistance body armour field.     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

面向SPR的异构路由器聚合交换技术

互联网的快速发展使得传统的POP组网方式面临巨大的挑战,部署SPR(Single POP Router)路由器被认为是解决问题的有效手段。提出了异构路由器的聚合交换技术,可以将POP中的多个异构路由器以集群的方式实现一个规模更大的SPR路由器,具有降低组网成本、保护现有投资、简化网络管理、提高交换效率等优点。给出了聚合交换技术中需要重点研究的几个关键问题以及研究思路。     

单星定向原理及GPS仿真试验

介绍了一种新的卫星定向方法,该方法仅利用一颗地球静止轨道卫星完成定向;介绍了利用GPS卫星进行单星定向原理验证试验的方法、条件和结果。试验结果表明,对于3m长基线,单星定向精度可达0.05°。从而说明利用一颗地球静止轨道卫星进行定向,在原理上是正确可行的。