样条函数康特诺维奇杂交元法在复合材料板弯曲中的应用

本文通过修正余能原理,用三次B 样条函数对应力和位移场进行插值,提出一种新的杂交元,应用离散的康特诺维奇法解决了金属和复合材料的弯曲问题。该法具有收敛快、计算精度高、处理边界条件方便的特点,能得到与位移同一精度的应力解,而且不存在多余零能模式和闭锁问题,是一种解决板弯曲问题的行之有效的计算方法。     

CAD/CAM 中的两种曲线保凸拟合

文中描述了一种保凸参数拟合方法。对于任意给定一个平面开(闭)的凸多边形、可用二次(三次)Bezier曲线段构造了一条C~1二次(C~2三次)的保凸插值样条曲线,并且简略讨论了该方法在CAD/CAM中的应用,如凸轮轮廓曲线的拟合,外形的几何设计等。我们在IBM-PC机上编制了通用的交互式作图软件,只要输入相应的坐标和控制参数,即可快速绘制出C~1二次(C~2三次)的保凸插值样条曲线。     

一种适用于长基线的改进CIR算法

长基线下,受伪距多径和电离层残差影响,传统的CIR法解算载波相位宽巷模糊度时某些历元无法得到正确的结果,基础载波模糊度的搜索范围也较大。分析了CIR法的模糊度误差,提出了基于载波相位平滑伪距并且消除电离层时延的改进的CIR算法,分析了其误差方差,最后利用Compass系统实测数据对短基线和长基线两种情况下CIR法和改进CIR法的解算结果进行比较。实测数据表明,本文提出的算法能够单历元解算超宽巷模糊度和宽巷模糊度,并且能够大大缩小基础载波模糊度的搜索空间。     

相干信号源DOA估计改进ESPRIT算法研究

在目标方位估计(DOA)的众多算法中,ESPRIT是一种运算速度快、精度高的常用算法,但它不能解相干信号。提出一种基于观测数据直接空间平滑的改进型ESPRIT算法,解决了常规ESPRIT算法不能解相干、对信噪比要求高等问题。该方法适用于所有信号(非相干和相干信号)的目标方位估计。     

A note on the forecast performance of temporal aggregation

Earlier research on the effects of nonoverlapping temporal aggregation on demand forecasting showed the benefits associated with such an approach under a stationary AR(1) or MA(1) processes for decision making conducted at the disaggregate level. The first objective of this note is to extend those important results by considering a more general underlying demand process. The second objective is to assess the conditions under which aggregation may be a preferable approach for improving decision making at the aggregate level as well. We confirm the validity of previous results under more general conditions, and we show the increased benefit resulting from forecasting by temporal aggregation at lower frequency time units. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 489–500, 2014     

再入目标质阻比估计算法研究

再入段目标识别的核心问题是快速高精度地估计出目标的质阻比。针对再入过程的非线性问题,重点研究了样条卡尔曼滤波器、扩展卡尔曼滤波器和一种基于"无损传输"的扩展卡尔曼滤波器,仿真实验从质阻比的估计精度和收敛速度以及计算量等方面比较了各滤波算法的性能。仿真结果表明基于无损传输的扩展卡尔曼滤波器的估计精度最高,收敛速度最快。     

空间非平稳高斯噪声背景下混合信号的DOA估计

针对空间非平稳高斯噪声背景下混合信号的DOA估计问题,提出了基于四阶累积量对混合波源的DOA估计算法。该算法首先构造四阶累积量矩阵,利用类似ESPR IT方法估计出所有非相关信源的DOA,然后对四阶累积量进行修正空间差分平滑去相干,消除非相关源和空间非平稳高斯噪声的影响,从而实现了对相干源的DOA估计。此方法通过分别估计非相关和相关或者相干信号的DOA,能够以较少的阵元实现对多个信号DOA估计,最后仿真实验也验证该算法的有效性。     

一种快速高精度的射表数据处理方法

介绍一种基于多结点样条函数的射表数据处理新方法。与弹道方程法和多项式函数逼近法的比较结果表明,本方法兼有快速、高精度和实现简便等优点。     

信息融合中的态势关联方法研究

在研究了态势目标航迹关联特点的基础上 ,建立了航迹预测和样条拟合关联模型 .该关联模型首先将前后两段航迹进行预测 ,然后进行样条拟合关联检验 ,从而实现了多目标环境中中断目标态势的关联判断 .经仿真计算 ,此关联模型是可行实用的     

The impact of exponential smoothing forecasts on the bullwhip effect

An important phenomenon often observed in supply chain management, known as the bullwhip effect, implies that demand variability increases as one moves up the supply chain, i.e., as one moves away from customer demand. In this paper we quantify this effect for simple, two‐stage, supply chains consisting of a single retailer and a single manufacturer. We demonstrate that the use of an exponential smoothing forecast by the retailer can cause the bullwhip effect and contrast these results with the increase in variability due to the use of a moving average forecast. We consider two types of demand processes, a correlated demand process and a demand process with a linear trend. We then discuss several important managerial insights that can be drawn from this research. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 269–286, 2000