动态矩阵控制在固体氧化物燃料电池中的应用

提出将动态矩阵控制(DMC)算法用于固体氧化物燃料电池(SOFC)的控制。为此,在分析SOFC动态机理模型的基础上,建立了其阶跃响应模型。控制目标是使SOFC的输出电压始终保持在一定范围内,并收敛到恒定的数值。在实际应用中,这样的算法应能提高SOFC输出功率的跟踪性能。仿真结果验证了这种方法的有效性。     

基于门限的无线传感器网络密钥管理方案

由于无线传感器网络在能量消耗、内存开销和计算能力等方面的局限性,传统的网络密钥管理方法已不适用。为此提出了一种适用于无线传感器网络的密钥预分配方法——基于（t,n）-门限方案,给出了密钥分配方法,并从方案的连通性、安全性等方面进行了有效的分析,结果表明该算法在这些方面有一定的优势。     

基于AT89C51和DS18B20温度的测量系统的实现

本系统为以AT89C51单片机作为主控芯片的温度测量系统,采用一线温度传感器DS18820实现温度的检测,结合128×64点阵式液晶显示模块OCM12864作为显示器,形象直观地显示测得的温度值。主要介绍了该系统的硬件结构和软件编程实现的方法,数字温度传感器DS18820的基本特性,阐述了DDRAM寻址与液晶点阵的对应关系及中文字符、中文菜单在液晶模块上的显示规则。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

基于芘丁醇的光学压敏涂料氧猝灭特性

以芘丁醇为原料制备的光学压敏涂料作为研究对象,采用荧光分光光度计测定了它们的荧光特性,考察不同激发光波长下压敏涂料的荧光特性及氧猝灭系数。结果表明：以芘丁醇为原料制备的压敏涂料的氧猝灭效果明显,其氧猝灭系数高达55％。涂料的荧光特性受激发光波长的影响很大,就同一受激态发射区464nm峰而言,用290nm的激发光比用364nm的激发光的氧猝灭率高出21．3％。     

C4ISR系统核心体系结构数据模型及其建模方法

C4ISR系统核心体系结构数据模型(CADM)的建模是CADM研究的主要工作,首先介绍了与CADM相关的一些基本概念,并对美军C4ISR系统核心体系结构数据模型的相关研究成果进行了分析;然后应用数据模型语言IDEF1X描述一种实际作战指挥单位通用的军事需求,反映核心体系结构数据模型的要求,以体现核心体系结构数据模型的作用.     

"M/M/1"在单火力单元射击多目标火力分配中的应用

在单服务台排队系统理论的基础上,建立了单火力单元对多个目标射击的系统仿真模型,对此模型进行了分析,给出了模型的适用范围,并通过在计算机上仿真运行实例,验证了该仿真模型的正确性.该方法是一种有益的尝试与探索,对局部作战指挥决策有一定的参考价值.     

SEA的侦察与监测系统效能分析

侦察与监测系统已成为现代C3I系统的重要组成部分,其效能评估既有C3I系统的一般性又有自身的特殊性。首先在一般系统效能含义上定义了侦察与监测系统的系统效能,比较了几种典型的C3I系统评估方法。在此基础上,将SEA方法应用于分析侦察与监测系统效能,并将情报信息量作为效能度量的指标。最后给出了分析计算过程和仿真结果。     

High strain rate deformation of explosion-welded Ti6Al4V/pure titanium

Multilayer materials are widely used in military, automobile and aerospace industries. In this paper, the response of an explosion-welded Ti6Al4V/pure titanium with a flat interface to dynamic loading is investigated. An SHPB apparatus is used. Then, the dynamic behaviour of a bimetal sample is explored with a DIC system coupled to the SHPB. Result indicates that in the bimetal sample pure titanium is deformed and failed before Ti6Al4V. The stress curve of the sample shows two different peaks in a striker velocity higher than the 18.3 m/s. When the incident wave encounters the interface of the Ti6Al4V/pure titanium sample, only a small fraction of the wave is reflected owing to similar impedance. Using the direct interpretation stress-strain curve is unreasonable in this case because of unhomogenised plastic deformation. The microstructure of the sample is investigated after loading. An adiabatic shear band is formed in the pure titanium side before failure, and the interface of the sample remains intact under different loading conditions. The FEM simulation result for the sample is in good agreement with experimental observations.     

型号研制与产品数据管理

介绍了产品数据管理(PDM)的概念和基本功能,结合当前型号研制的特点和计算机信息技术应用的状况、发展,研究了型号研制产品数据管理的需求、功能及实施,为当前型号研制依靠CIMS技术实现产品数据管理提出了8条基本原则。