弹炮结合防空武器系统毁伤概率分析与仿真

针对弹炮结合防空武器系统毁伤概率是决定系统效能的关键问题,分析了决定系统精度和毁伤概率的主要因素及其相互关系.以单枚导弹对目标的毁伤概率和高炮一次点射对目标的毁伤概率为目的,建立了弹炮结合系统毁伤概率分析模型.通过计算机仿真得出了一定航路条件下对典型目标射击,高炮一个2S长的36发点射的平均毁伤概率为40%,单枚导弹的平均毁伤概率为63%.在2枚导弹和2个点射的情况下,系统总的毁伤概率可达97.8%.     

用于要地末端防御的现代近程防空导弹的需求分析

直接打击空袭武器的近程末端防御是现代战术防空体系的一个重要组成部分。用于末端防御的现代近程防空导弹必须具有高的火力密度,能够有效击毁空袭武器,为此必须采用现代精确制导控制技术,它是一种全新的防空导弹。     

Counterinsurgency American style: Considering David Petraeus and twenty-first century irregular war

This article examines the complex legacy of David Petraeus who was a key figure in the emergence of the US military shift towards counterinsurgency doctrine in the years after 2006. Although Petraeus has been perceived by critics as a publicity seeker, he can be credited with laying the foundations for a more serious commitment to COIN involving in particular in integrating conventional and Special Forces in arenas like village stability operations. The article looks a Petraeus's role in both Iraq and Afghanistan: it concludes that, in the case of Afghanistan, it is too early to assess whether counterinsurgency has had a decisive impact of the outcome of the war against the Taliban.     

陆军诸兵种合同作战兰切斯特方程的弹药消耗预测研究

描述了诸兵种合同作战的兰切斯特方程及其矩阵解,提出了一种通过兵力损耗换算弹药损耗的新思路,分析和确定了用该方法预测弹药消耗的相关参数,最后运用Matlab进行仿真计算,预测出了武器装备战损情况和弹药消耗情况。     

某型火箭增程破甲弹发动机弹道炸分析与处理

根据某型火箭增程破甲弹,在研制阶段做高、底温强度试验时分别出现发动机弹道炸的质量问题,结合实践在理论方面进行了分析,提出了对发动机燃烧室内个别件改进设计的方法。     

约束条件下导弹姿态跟踪保性能控制

针对BTT导弹在飞行过程中模型存在较大不确定性,并且控制舵的摆角受到物理装置约束的情况,研究了在约束条件下导弹姿态跟踪保性能控制的设计问题。首先在弹道的特征点处将导弹的非线性运动瞬时线性化,将导弹看作是一个不确定线性系统,提出应用基于线性矩阵不等式的跟踪保性能控制设计姿态控制器,然后推导得到满足控制约束的充分条件,以定理的形式给出了约束条件下跟踪保性能控制存在的充分条件。最后以某型导弹的姿态控制为例,设计了其姿态的跟踪保性能控制器。六自由度仿真结果表明了所得方法的有效性和可行性。     

舰空导弹设计方案评价

舰空导弹设计方案评价是一项复杂的系统工程。因其涉及到的因素众多,有些因素易于量化,有些因素难以量化,往往给决策者带来诸多困难。在建立舰空导弹设计方案评价指标体系的基础上,采用熵权法和理想点法相结合的方法对舰空导弹设计方案评价问题进行研究,以期降低决策的主观随意性,使决策更加科学合理。     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

从爱国者导弹系统的主要特点探讨对其系统干扰对抗的途径

通过爱国者导弹系统的特点和改进后与Ｓ－３００系统的主要性能进行比较,探讨对爱国者导弹系统的干扰对抗途径及我国防空系统的对策     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008