围压下固体推进剂的破坏机理分析

贴壁浇筑的固体发动机推进剂药柱在点火状态下处于三向围压状态,而环向承受拉应变,亟待对围压下推进剂的破坏机理展开研究。基于自研的围压加载试验系统,通过开展推进剂在不同围压、温度和应变率下的单轴拉伸试验来研究围压、温度和应变率的耦合作用对推进剂力学行为的影响。针对围压下推进剂的力学响应特征,通过细观力学仿真进一步研究围压下推进剂的破坏形式,同时借助电镜扫描试验分析推进剂试样断面的形貌特征,通过试验和仿真相结合的手段分析了围压下推进剂的破坏机理。研究结果表明,围压下推进剂的损伤界面显著减少,且随着围压载荷的逐渐增加,推进剂的损伤形式从以颗粒脱湿为主转变为以颗粒破碎为主。     

Controllable combustion behaviors of the laser-controlled solid propellant

Microsatellites have been widely applied in the fields of communication,remote sensing,navigation and science exploration due to its characteristics of low cost,flexible launch mode and short development period.However,conventional solid-propellant have difficulties in starting and interrupting combustion because combustion is autonomously sustained after ignition.Herein,we proposed a new type of solid-propellant named laser-controlled solid propellant,which is sensitive to laser irradiation and can be started or interrupted by switching on/off the continuous wave laser.To demonstrate the feasibility and investigate the controllable combustion behaviors under different laser on/off conditions,the combus-tion parameters including burning rate,ignition delay time and platform pressure were tested using pressure sensor,high-speed camera and thermographic camera.The results showed that the increase of laser-on or laser-off duration both will lead to the decrease of propellant combustion performance during re-ignition and re-combustion process.This is mainly attributed to the laser attenuation caused by the accumulation of combustion residue and the change of chamber ambient temperature.Simultaneously,the multiple ignition tests revealed that the increased chamber ambient temperature after combustion can make up for the energy loss of laser attenuation and expansion of chamber cavity.However,the laser-controlled combustion performance of solid propellant displayed a decrease trend with the addi-tion of ignition times.Nevertheless,the results still exhibited good laser-controlled agility of laser-controlled solid propellant and manifested its inspiring potential in many aspects of space missions.     

通用导弹告警设备的试验和研究

导弹在进攻时,其截面相当于一个偶极子天线或单根箔条,利用导弹对特定频率雷达信号的谐振特性来增大目标的散射截面积。通过反辐射导弹告警实验设备系统的实弹打靶试验,验证了该理论的正确性和可行性。     

自动变速车辆换挡规律的研究

研究了自动变速车辆的换挡规律的算法,制定了车辆的动力性换挡规律和经济性换挡规律,建立了车辆动力学仿真模型.通过仿真,分析了不同换挡规律对车辆性能的影响.     

装甲车辆远程故障诊断技术

基于网络的远程故障诊断是诊断系统的发展趋势,在论述远程故障诊断的基本概念、优势及关键技术的基础上,提出了构造装甲车辆远程故障诊断系统的总体框架结构和工作模式,阐述了系统实施的可行性及在部队应用的重大意义.     

两路相互注入锁定Nd:YAG激光器

通过锁定多模块输出激光相位实现激光功率扩展的相干合成技术是获得高能高光束质量光源的有效途径.本文分析了相互注入锁定相干合成的机理及其对激光器相干性的影响,利用偏振元件将两路独立的Nd:YAG激光器关联起来,解决了耦合过程中的损耗问题,实现了两路激光器的相互注入锁定,获得了总功率4.4W的部分相干激光输出,长曝光结果表明远场光斑峰值功率密度提高了1.4倍,对利用相干合成技术实现高能固体激光器技术进行了初步探索.     

高空长航时无人机编队协同侦察任务规划

针对高空长航时无人机侦察任务规划特点,分析了高空长航时无人机执行侦察任务过程中的飞行航线约束和通信条件约束,以最小化无人机总飞行航程和最终编队飞行时间为优化目标,建立无人机编队协同侦察任务规划问题模型。同以往的通用侦察任务模型相比,该模型突出考虑了高空长航时无人机执行侦察任务过程的特点。以基本粒子群算法为基础,通过粒子群离散化和结合遗传算法进行改进,使其适用于求解复杂组合优化问题。仿真结果验证了算法求解复杂任务规划问题的有效性。     

基于公共燃气排导结构的共架发射系统武器选择与布局方法

公共燃气排导结构和同心筒结构的共架发射系统由于燃气排导机理不同,其对武器发射的影响及在武器选择、布局等方面均存在较大差异.针对公共燃气排导结构的共架发射系统分析了公共燃气排导对武器发射的影响,提出了武器选择与布局方法,通过算例进行了验证并得出结论:公共燃气排导结构的共架发射系统武器布局上应采取分散布局,武器选择上应优先选择“无发射活动、对应武器数量较多、烧蚀值较小”的模块,且按照模块编号依次交替在不同模块进行武器发射.     

战场环境下无人车辆战术机动路径规划方法

针对不同类型威胁体存在的战场环境中无人车辆战术机动路径规划问题,提出了一种基于威胁代价地图的粒子群优化（Particle Swarm Optimization,PSO）方法。借助极坐标系中关键点的极角进行路径描述,并使用分段3次Hermite插值方法形成光滑路径,将路径规划问题转化为关键点极角的参数优化问题。针对基本PSO（BPSO）算法存在的早熟收敛和后期迭代效率低的缺陷,借鉴以群集方式生活的物种按照不同任务对种群进行分工的机制,提出了一种基于多任务子群协同的改进粒子群优化（Particle Swarm Optimization based on the Multi—tasking Subpopu—lation Cooperation,PSO-MSC）算法。借助该算法的快速收敛和全局寻优特性实现了最优路径规划。实验结果表明：该算法可以快速有效地实现战场环境下无人车辆的战术机动路径规划,且规划路径安全、平滑。     

Supercritical carbon dioxide as a new working medium for pneumatic launch: A theoretical study

Compared with the conventionally gaseous or liquid working media, the specific internal energy of supercritical carbon dioxide (SCD) is higher at the same temperature and pressure, and the critical temperature of carbon dioxide is close to room temperature, making SCD a potential new working medium for pneumatic launch. To analyze the feasibility of this conception, an analytical model of a pneumatic catapult is established on basis of the conservations of mass and energy. The model consists of a high-pressure chamber and a low-pressure chamber connected by multiple valves, and there is a movable piston in the low-pressure chamber that can push an aircraft to accelerate. The effects of the launch readiness state of SCD in the high-pressure chamber, the initial volume of the low-pressure chamber and the valve control on the movement of the aircraft are analyzed. It is found that there is a restrictive relation between the temperature and pressure of the launch readiness state of SCD, i.e., there is a maximum allowable launch readiness pressure when the launch readiness temperature is fixed. If this restrictive relation is not satisfied, the working medium in the low-pressure chamber will drop to its triple point within a few milliseconds, leading to a launch failure. Owing to this restrictive relation, there is an optimal launch readiness state of SCD with the highest working capacity for any allowable launch readiness temperature. The pressure of the low-pressure chamber will decrease significantly as the initial volume increases, leading to a decreased acceleration of the aircraft. The ac-celeration can be controlled below a critical value by a designed sequential blasting technique of multiple valves. The calculated results show that a 500 kg aircraft can be accelerated from 0 to 58 m/s in 0.9 s with 36 kg of carbon dioxide. This research provides a new technique for the controllable cold launch of an aircraft.