同时收发认知抗干扰系统的改进能量检测算法

为增强复杂电磁环境中同时收发认知抗干扰通信系统的性能,研究了基于该系统的改进能量检测算法,推导出瑞利衰落信道中系统的检测概率、虚警概率及中断概率的理论表达式。该改进方法思想是将自干扰信道容量与接收机所需传输速率进行比较,通过比较结果确定能量检测门限值。仿真结果表明,改进能量检测算法能够有效地降低自干扰信号对同时收发认知抗干扰接收机的不利影响,提升系统的中断性能。     

“小机构”的“大智慧”——美国高能激光技术联合办公室

美国国防部在世纪伊始成立的高能激光技术联合办公室专职人员不到10人,却能高效调动创新体系中所有创新单元,长期保持战略先导地位。本文全面介绍联合办公室的使命职能、编制组成、运行方式、科研项目、代表性成果以及重要决策,旨在为技术创新和管理创新提供参考和借鉴。     

Sensor placement in active multistatic sonar networks

The idea of deploying noncollocated sources and receivers in multistatic sonar networks (MSNs) has emerged as a promising area of opportunity in sonar systems. This article is one of the first to address point coverage problems in MSNs, where a number of points of interest have to be monitored in order to protect them from hostile underwater assets. We consider discrete “definite range” sensors as well as various diffuse sensor models. We make several new contributions. By showing that the convex hull spanned by the targets is guaranteed to contain optimal sensor positions, we are able to limit the solution space. Under a definite range sensor model, we are able to exclude even more suboptimal solutions. We then formulate a nonlinear program and an integer nonlinear program to express the sensor placement problem. To address the nonconvex single‐source placement problem, we develop the Divide Best Sector (DiBS) algorithm, which quickly provides an optimal source position assuming fixed receivers. Starting with a basic implementation of DiBS, we show how incorporating advanced sector splitting methods and termination conditions further improve the algorithm. We also discuss two ways to use DiBS to find multiple source positions by placing sensors iteratively or simultaneously. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 287–304, 2017     

发动机冷却燃料超临界压力下做功潜力㶲分析

在高马赫数飞行下,超燃冲压发动机的燃料冷却量大于燃料燃烧量。为了降低燃料的冷却量以及实现燃料冷却量和燃烧量的匹配,采用分析法对超燃冲压发动机壁面燃料冷却工质在超临界压力下进行做功潜力分析。发动机壁面冷却燃料的特性决定其热量大小。根据发动机壁面温度分布、热流密度分布计算热量,建立稳定流动燃料工质的平衡方程。结果表明:在壁面最高温度为1200 K时,传入壁面的热量为562.4 k W,其中理论热量为541.3 k W;冷却燃料工质流量增加,最大输出功减小;燃料工质出口温度增加,输出功减小;燃料工质出口压力增加,输出功基本不变。     

电传动装甲车辆负载功率预测实时能量管理策略

针对电传动装甲车辆负载功率预测功能缺失导致控制作用滞后的问题,提出一种具有较高负载功率预测精度的实时能量管理策略。在分析整车结构的基础上,采用理论分析和数据拟合方法,建立各动力源数学模型。将差分自回归移动平均模型和自适应马尔可夫链两种预测方法相结合,设计非平稳趋势性负载功率组合预测方法。在非线性模型预测控制框架下,构建多目标优化函数,采用序列二次规划法在有限时域内实时求解最优控制指令,优化多动力源协调控制过程。依托硬件在环仿真平台进行多路面行驶实验,对比有无功率预测的能量管理控制效果。结果表明,改进的实时能量管理策略对未来负载功率具有较好的预见性,能够显著优化多动力源协调控制过程,提升车辆燃油经济性,稳定母线电压和电池荷电状态,对传统模型预测控制下的工程应用场景具有一定借鉴意义。     

分布式储能技术的探索与实践

文章阐述了分布式储能技术的重要意义,介绍了分布式储能技术在经济社会可持续发展重要领域——能源互联网发展中的重要地位,并对分布式储能的技术形态与载体进行了分析,最后以信息网络重要组成部分——数据中心为应用场景,对分布式储能技术的实践进行了探讨。     

未来能量互联的关键设备——固态变压器

固态变压器作为能源互联网中实现能量转换和控制的关键设备,有很多方面需要进行深入研究,文章结合固态变压器的自身特点,对其主要发展的核心技术,包括基于SiC新型宽禁带材料的研制、基于SiC的固态功率器件和固态变压器设计与实现、固态变压器的先进控制策略研究等进行了详细阐述。     

基于兰切斯特方程的网络中心战模型

为了更全面、客观地评价信息优势和决策优势对网络中心战进程的影响,在分析经典兰切斯特方程的基础上,引入信息?决策概率,提出了基于兰切斯特方程的网络中心战模型,仿真实验表明该模型能够有效地描述信息?决策概率在网络中心战进程中发挥的作用,为研究分析网络中心作战过程提供了理论参考。     

A novel gradient approach for optimal design and sensitivity analysis of EWMA control charts

Conventional control charts are often designed to optimize out‐of‐control average run length (ARL), while constraining in‐control ARL to a desired value. The widely employed grid search approach in statistical process control (SPC) is time‐consuming with unsatisfactory accuracy. Although the simulation‐based ARL gradient estimators proposed by Fu and Hu [Manag Sci 45 (1999), 395–413] can alleviate this issue, it still requires a large number of simulation runs to significantly reduce the variance of gradient estimators. This article proposes a novel ARL gradient estimation approach based on integral equation for efficient analysis and design of control charts. Although this article compares with the results of Fu and Hu [Manag Sci 45 (1999), 395–413] based on the exponentially weighted moving average (EWMA) control chart, the proposed approach has wide applicability as it can generally fit into any control chart with Markovian property under any distributions. It is shown that the proposed method is able to provide a fast, accurate, and easy‐to‐implement algorithm for the design and analysis of EWMA charts, as compared to the simulation‐based gradient estimation method. Moreover, the proposed gradient estimation method facilitates the computation of high‐order derivatives that are valuable in sensitivity analysis. The code is written in Matlab, which is available on request. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 223–237, 2014     

Stochastic framework for partially degradation systems with continuous component degradation‐rate‐interactions

Many conventional models that characterize the reliability of multicomponent systems are developed on the premise that for a given system, the failures of its components are independent. Although this facilitates mathematical tractability, it may constitute a significant departure from what really takes place. In many real‐world applications, system components exhibit various degrees of interdependencies, which present significant challenges in predicting degradation performance and the remaining lifetimes of the individual components as well as the system at large. We focus on modeling the performance of interdependent components of networked systems that exhibit interactive degradation processes. Specifically, we focus on how the performance level of one component affects the degradation rates of other dependent components. This is achieved by using stochastic models to characterize how degradation‐based sensor signals associated with the components evolve over time. We consider “Continuous‐Type” component interactions that occur continuously over time. This type of degradation interaction exists in many applications, in which interdependencies occur on a continuum. We use a system of stochastic differential equations to capture such “Continuous‐Type” interaction. In addition, we utilize a Bayesian approach to update the proposed model using real‐time sensor signals observed in the field and provide more accurate estimation of component residual lifetimes. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 286–303, 2014