水下声源引起的水表面横向微波的理论研究

利用水下声信号在水表面引起的水表面横向微波振幅很小的条件,将普遍的流体力学方程线性化,推导出在水下点声源的激励下,水表面产生的二维横向微波色散关系以及波的传播形式。结果表明,二维水表面的横向微波具有和一维情况类似的结果,即具有波长短、传播速度小的特点,因而可以对入射到表面的激光束进行调制,为水下声信号检测奠定了理论基础。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

国外先进战斗机电子对抗系统的发展

首先介绍国外F-22和F-35为代表的先进战斗机的电子战系统和其他欧洲先进战斗机的电子战系统等发展情况。对未来战斗机电子战系统的综合特点和基本功能进行了比较详细的分析和描述,最后叙述了未来战斗机的航空电子系统将设计成为一体化共平台,电子战系统与一体化的航空电子系统融合成为一个功能系统,并描述了这种先进的电子战系统的作战能力。     

潜艇鱼雷武器系统攻击海上目标的等概率阵位图

指出了目前装艇使用的潜艇火控系统中鱼雷等概率阵位图中的错误。对在各级海况下使用不同攻击方式时 ,潜艇在不同目标距离、舷角对目标进行攻击的捕获概率进行了计算 ,并利用多项式回归的方法得出了较为客观的等概率阵位图。由此澄清了等概率阵位图中的一些错误 ,为潜艇部队作战使用既提供了理论上的依据 ,又提供了一种直观简便的辅助决策手段。     

海空背景下目标红外辐射特征分析

根据海空复杂背景下点目标的红外特征 ,提出了目标红外特征的一般计算方法 .根据不同的气象条件、不同海域背景 ,计算分析了环境对红外辐射两个大气窗口 ,即 3～ 5 μm和 8～ 12 μm双波段大气透过率的影响 ,并给出了相应结论     

亚音速轴流风扇静转子相互作用线谱噪声预报

静转子相互作用线谱噪声是亚音速轴流风扇主要噪声源之一,快速预报该噪声对风扇设计初期的叶片选型和参数设计具有重要意义.因此在叶栅响应函数理论的基础上考虑静转子叶片的相互作用,采用叶片经验尾流模型模拟转子尾流,推导得到静转子叶栅相互作用线谱辐射声功率半经验半理论计算公式.通过与NASA已有的试验模型和计算模型结果对比,验证...     

红外脉冲强光辐射产生技术研究

定向红外脉冲强光辐射技术是定向红外对抗中的关键技术,主要用来破坏敌方精确制导武器或C4I系统的红外传感器。本文进行了三种产生技术的研究,即爆炸激励惰性气体,多丝电爆激励惰性气体和多点同步爆燃药物。在同步爆燃产生技术的研究中,当有效载荷弹药为0.2kg时,在距离源50m处得到三个波段(1～3、3～5、8～12μm)的辐射强度为(2.00～3.55)×l05W／Sr,脉冲半高宽为约20ms的强红外辐射脉冲。     

三维声音处理技术的研究

在声音定位原理研究的实验中,运用软件编程的方法改变原有．WAV文件(单声道、16位)的数据存储格式为有空间感立体声的．WAV声音文件(双声道、16位),在变换过程中加入了ITD、IID的数学模型,效果令人满意,听者能明显感到随着声源位置信息的改变,声源位置、音量也在改变     

石墨烯电声换能器的设计与对比

为了使石墨烯电声换能器获得最优性能,主要针对石墨烯热致发声器件和静电式发声器件进行了发声机理研究,通过理论建模和分析,得到了薄膜尺寸、厚度以及应力等结构参数对两种电声换能器的频率响应特性的影响规律。通过微纳加工制造方法设计和制备了一批不同结构参数下的电声换能器,并对这些器件进行了性能测试和对比分析,结果表明：薄膜厚度对热致电声换能器发声声压影响显著,即薄膜越薄,该电声换能器的发声声压越大;薄膜半径、厚度和应力对静电式电声换能器的频带影响较大,即薄膜半径越大,厚度越薄,应力越小,该电声换能器频带越宽。以上研究为优化选取石墨烯电声换能器的类型,优化设计结构参数,提升器件发声性能奠定了基础。     

A study of flames with millimeter-wave radiation

It is a valuable issue to explore whether a flame can radiate microwaves, in spite of the electric field formed in the flame. Presented herein is an experimental study on a series of flames with millimeter-wave radiation in the combustion of pyrotechnic films. The pyrotechnic films were composed of ultra-fine red phosphorus (P), sodium nitrate (NaNO₃), Polyvinyl Alcohol (PVA) and some additives such as chopped carbon fibers (CFs) and aluminized glass fibers (GFs). The combustion temperatures and millimeter-wave radiation signals of the flames were measured, the millimeter-wave emissivity and spectral radiant exitance were calculated to describe the millimeter-wave radiation intensity. The results demonstrate that the flame of the pyrotechnic films based on P/NaNO₃/CFs can radiate millimeter waves, and different materials and their proportion have a great effect on the millimeter-wave radiation intensity.